| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set,
a user fault may trigger show_pte() without any lock.
If another thread in the same process concurrently calls munmap(),
the page table pages may be freed while show_pte() is still traversing
them, causing a use-after-free in show_pte().
If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table
of PMD are freed when show_pte() is running.
Acquire mmap_write_lock() around show_pte() for user faults to fix the
contention.
For user faults, additionally restrict that show_pte() is called only
when the addr is a user-space address (addr < TASK_SIZE). This is because
the lock of tsk->mm only protects the virtual memory of user address space,
furthermore, dumping the page tables of a kernel-space address for user
faults is unnecessary and may have security implications.
Keep everything unchanged for kernel faults, because the kernel is
already in the "oops" state, acquiring a lock may risk a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
sd_set_special_bvec() allocates a special payload page for UNMAP and
WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in
sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI
midlayer does not call uninit_command() because RQF_DONTPREP is not set
yet, leaking the page.
Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after
freeing the page. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always wait for ordered extents to avoid OE races
[BUG]
Syzbot reported a bug that there can be conflicting OEs for the same
range:
BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:264!
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0
Call Trace:
<TASK>
cow_file_range+0x744/0x12a0
fallback_to_cow+0x5ea/0xa00
run_delalloc_nocow+0x110c/0x17a0
btrfs_run_delalloc_range+0xbe4/0x1c20
writepage_delalloc+0x104d/0x1ba0
btrfs_writepages+0x1667/0x28b0
do_writepages+0x338/0x560
filemap_fdatawrite_range+0x1f2/0x300
btrfs_fdatawrite_range+0x54/0xf0
btrfs_direct_write+0x6a0/0xc30
btrfs_do_write_iter+0x329/0x790
do_iter_readv_writev+0x624/0x8d0
vfs_writev+0x34c/0x990
__se_sys_pwritev2+0x17a/0x2a0
do_syscall_64+0x174/0x580
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
[CAUSE]
Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback
for append direct writes"), if the direct IO finished short, we will
revert the isize back to the original one, so that append writes can be
respected during the buffered fallback.
Normally we rely on lock_and_cleanup_extent_if_need() function during
buffered writeback to wait for any existing ordered extents.
But that ordered extent waiting only happens if the start_pos is inside
the isize.
Since we have reverted the isize during failed direct IO, we will not
wait for any ordered extents.
This means we can have a race where the direct IO OE is still in the
tree, finished but not yet removed, then we're inserting the OE for the
buffered write, causing the above crash.
[FIX]
Make the OE wait to be unconditional, to handle the reverted isize
situation.
And since lock_and_cleanup_extent_if_need() now either lock the
extents or return -EAGAIN, also remove the branches that handles
no-extent-locked cases, and rename it to remove the "_if_need" suffix.
The following micro benchmark shows the runtime difference for
btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload,
all values are the average runtime in nano seconds.
function runtime | before | after
-----------------------------------+-------------+---------------
lock_and_cleanup_extent_if_need() | 58.2 | 183.0
btrfs_buffered_write() | 2115.6 | 2973.3
The overall runtime of btrfs_buffered_write() is still pretty
tiny (still less than 3 micro seconds), I'd say the extra cost is still
acceptable.
An alternative to fix this problem is to wait ordered extents during
iomap_end() where the isize revert is done.
But that solution will break nowait requirement, as if a nowait direct
IO finished short, we have to wait for the OEs unconditionally or the
next append buffered IO can still hit the same problem.
So here we have to move the wait cost to buffered write, but at least
the code is slightly more streamline. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: release descriptor pools on probe failure
The per-NUMA-node descriptor DMA pools are created lazily from
nvme_init_hctx_common() once the admin tag set is allocated, but they are
only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any
probe failure after the admin tag set has been allocated unwinds through
the out_disable label and nvme_pci_free_ctrl(), neither of which releases
the pools, leaking the dma_pool objects.
Release the descriptor pools in the out_disable error path. It must not
be added to nvme_pci_free_ctrl(), as that would double-free against
nvme_remove() on the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: hold a reference to the request skb during send_frame
__pn533_send_async() publishes the command and then calls
dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame
can be matched to this command: the I2C threaded IRQ runs
pn533_recv_frame(), which queues cmd_complete_work, and
pn533_send_async_complete() frees cmd->req with consume_skb().
On the I2C transport, pn533_i2c_send_frame() still dereferences the same
skb after i2c_master_send() returns, so a completion that races the
send can free the skb while the transport is still using it.
The request skb is owned by the command object and may be freed by
command completion at any time after dev->cmd is published, so the
transport send path must not assume it stays alive. Hold a temporary
reference to the request skb across the send_frame() call so the
transport always sees a live skb even if completion races the send.
Add a pn533_send_cmd_frame() helper and use it from all three send
paths. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix invalid pointer dereference in ksmbd_stop_durable_scavenger()
See the procedure below:
ksmbd_launch_ksmbd_durable_scavenger
durable_scavenger_running = true
server_conf.dh_task = kthread_run() // fail, dh_task is an ERR_PTR()
server_ctrl_handle_reset
ksmbd_stop_durable_scavenger
kthread_stop(server_conf.dh_task) // invalid pointer |
| In the Linux kernel, the following vulnerability has been resolved:
pnfs/blocklayout: Fix device leaks on parse failure
bl_parse_concat() and bl_parse_stripe() allocate a child device array and
then parse each child in turn. If parsing a child fails, the failed child is
not counted in nr_children and the parent may be left with a children array
that bl_free_device() will not release when nr_children is zero.
Release the failed child and the already parsed children before returning the
error. Also make bl_free_device() release the child array whenever the
children pointer is set, so that partially initialised concat or stripe
devices are cleaned up correctly.
bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the
file reference. Clear the pointer after fput() so that an outer cleanup path
does not put it again. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
The VMBus module initialization function, hv_acpi_init(), currently
does nothing when running in the root partition and root is not nested
in another VM. But the initialization function reports success, so the
VMBus module is indeed loaded. VMBus functionality is not actually
needed, but the VMBus module must be loaded so that hv_vmbus_exists()
can answer correctly. Furthermore, the mshv_root dependency on the
VMBus module is needed as described in the commit message for
840b740a35bf ("mshv: Add conditional VMBus dependency").
Loading the VMBus module without actually initializing it causes
failures if the module should later be unloaded. The module unload code
tries to clean up things that were never initialized, resulting in
memory faults and a panic.
Fix this by having VMBus module exit function perform the same
check for non-nested root partition, and do nothing in such a
case, just like hv_acpi_init().
In the long run, the code that manages the Hyper-V provided SynIC
should be refactored to better coordinate the requirements of
root partition scenarios and normal VM scenarios, and to hopefully
remove the hv_vmbus_exists() dependnecy between mshv_root and
VMBus modules. Preventing the current unload failure scenario is
an expediency until such a refactoring is done. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix corruption of urgent data on multi-segment retransmit
On the normal xmit path, while in urgent mode we refuse to build a
multi-segment TSO packet, so every segment gets its own urg_ptr:
/* tcp_write_xmit() */
limit = mss_now;
if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(...);
The retransmit path has no such guard. __tcp_retransmit_skb() builds a
segs > 1 skb and hands it to the GSO layer, which only advances th->seq
per segment and copies urg_ptr verbatim:
/* __tcp_retransmit_skb() */
len = cur_mss * segs; /* segs > 1, no urg_mode check */
...
/* tcp_gso_segment(): bumps seq only, urg_ptr is copied */
urg_ptr is an offset from the segment's own seq, so a copied value points
at a different place on each segment. The receiver rebuilds the absolute
urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead
of the one OOB byte:
seg1 seq 1 urg_ptr 5001 -> urgent @ 5001 (ok)
seg2 seq 1001 urg_ptr 5001 -> urgent @ 6001 (wrong, +MSS)
seg3 seq 2001 urg_ptr 5001 -> urgent @ 7001 (wrong, +2*MSS)
The real OOB byte is never pointed at, so the receiver stops splicing it
out and delivers it as normal in-band data, corrupting the stream.
Guard the retransmit length like the xmit path: keep segs = 1 while in
urgent mode. |
| The issue was addressed with improved checks. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. An app may be able to access user-sensitive data. |
| Privilege escalation in the Memory component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| Privilege escalation in the DevTools component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| Use of uninitialized resource in Windows GDI+ allows an authorized attacker to disclose information locally. |
| Generation of error message containing sensitive information in Microsoft COM for Windows allows an authorized attacker to disclose information locally. |
| Use after free in Windows DNS allows an authorized attacker to elevate privileges locally. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows License Manager allows an authorized attacker to disclose information locally. |
| Out-of-bounds read in Windows Imaging Component allows an authorized attacker to disclose information locally. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows MIDI Service Module allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Management Instrumentation allows an authorized attacker to disclose information over a network. |
