| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: avoid sleepable page allocation from atomic context
apply_to_pte_range() enters the lazy MMU mode and then invokes
kasan_populate_vmalloc_pte() callback on each page table walk iteration.
However, the callback can go into sleep when trying to allocate a single
page, e.g. if an architecutre disables preemption on lazy MMU mode enter.
On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and
arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs:
[ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321
[ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
[ 0.663358] preempt_count: 1, expected: 0
[ 0.663366] RCU nest depth: 0, expected: 0
[ 0.663375] no locks held by kthreadd/2.
[ 0.663383] Preemption disabled at:
[ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0
[ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT
[ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux)
[ 0.663409] Call Trace:
[ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140
[ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700
[ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0
[ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0
[ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0
[ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120
[ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0
[ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120
[ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0
[ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0
[ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0
[ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40
[ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0
[ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10
[ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0
[ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310
[ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110
[ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330
[ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0
[ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90
[ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0
[ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0
[ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0
[ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0
[ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38
Instead of allocating single pages per-PTE, bulk-allocate the shadow
memory prior to applying kasan_populate_vmalloc_pte() callback on a page
range. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable()
The selftests added to our CI by Bui Quang Minh recently reveals
that there is a mem leak on the error path of virtnet_xsk_pool_enable():
unreferenced object 0xffff88800a68a000 (size 2048):
comm "xdp_helper", pid 318, jiffies 4294692778
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
__kvmalloc_node_noprof+0x402/0x570
virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882)
xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226)
xsk_bind+0x6a5/0x1ae0
__sys_bind+0x15e/0x230
__x64_sys_bind+0x72/0xb0
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix metadata dst->dev xmit null pointer dereference
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.
With this fix xfrm interface's Tx error counters go up as usual.
[1] net-next calltrace captured via netconsole:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
Call Trace:
<TASK>
xfrmi_xmit+0xde/0x460
? tcf_bpf_act+0x13d/0x2a0
dev_hard_start_xmit+0x72/0x1e0
__dev_queue_xmit+0x251/0xd30
ip_finish_output2+0x140/0x550
ip_push_pending_frames+0x56/0x80
raw_sendmsg+0x663/0x10a0
? try_charge_memcg+0x3fd/0x7a0
? __mod_memcg_lruvec_state+0x93/0x110
? sock_sendmsg+0x30/0x40
sock_sendmsg+0x30/0x40
__sys_sendto+0xeb/0x130
? handle_mm_fault+0xae/0x280
? do_user_addr_fault+0x1e7/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7ff35cac1366
Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
</TASK>
Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
CR2: 00000000000000c0 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix call trace with null VSI during VF reset
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
call trace in ice_reset_vf that VF's VSI is null.
[145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice]
[145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE
xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun
bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC
O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m
ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh
mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci
libata crc32c_intel mdio dca wmi fuse [last unloaded: ice]
[145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24
[145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015
[145237.352923] Workqueue: ice ice_service_task [ice]
[145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice]
[145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a
9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe
[145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246
[145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000
[145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800
[145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000
[145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005
[145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000
[145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000
[145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0
[145237.353003] Call Trace:
[145237.353008] <TASK>
[145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice]
[145237.353049] ice_service_task+0x79f/0xef0 [ice]
[145237.353074] process_one_work+0x1c8/0x390
[145237.353081] ? process_one_work+0x390/0x390
[145237.353084] worker_thread+0x30/0x360
[145237.353087] ? process_one_work+0x390/0x390
[145237.353090] kthread+0xe8/0x110
[145237.353094] ? kthread_complete_and_exit+0x20/0x20
[145237.353097] ret_from_fork+0x22/0x30
[145237.353103] </TASK>
Remove WARN_ON() from check if VSI is null in ice_reset_vf.
Add "VF is already removed\n" in dev_dbg().
This WARN_ON() is unnecessary and causes call trace, despite that
call trace, driver still works. There is no need for this warn
because this piece of code is responsible for disabling VF's Tx/Rx
queues when VF is disabled, but when VF is already removed there
is no need to do reset or disable queues. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-blk: Avoid use-after-free on suspend/resume
hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is
freed on suspend and reallocated on resume. So, hctx->user_data is
invalid after resume, and it will cause use-after-free accessing which
will result in the kernel crash something like below:
[ 22.428391] Call Trace:
[ 22.428899] <TASK>
[ 22.429339] virtqueue_add_split+0x3eb/0x620
[ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0
[ 22.430789] ? kvm_clock_get_cycles+0x14/0x30
[ 22.431496] virtqueue_add_sgs+0xad/0xd0
[ 22.432108] virtblk_add_req+0xe8/0x150
[ 22.432692] virtio_queue_rqs+0xeb/0x210
[ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280
[ 22.434059] __blk_flush_plug+0xe1/0x140
[ 22.434853] blk_finish_plug+0x20/0x40
[ 22.435512] read_pages+0x20a/0x2e0
[ 22.436063] ? folio_add_lru+0x62/0xa0
[ 22.436652] page_cache_ra_unbounded+0x112/0x160
[ 22.437365] filemap_get_pages+0xe1/0x5b0
[ 22.437964] ? context_to_sid+0x70/0x100
[ 22.438580] ? sidtab_context_to_sid+0x32/0x400
[ 22.439979] filemap_read+0xcd/0x3d0
[ 22.440917] xfs_file_buffered_read+0x4a/0xc0
[ 22.441984] xfs_file_read_iter+0x65/0xd0
[ 22.442970] __kernel_read+0x160/0x2e0
[ 22.443921] bprm_execve+0x21b/0x640
[ 22.444809] do_execveat_common.isra.0+0x1a8/0x220
[ 22.446008] __x64_sys_execve+0x2d/0x40
[ 22.446920] do_syscall_64+0x37/0x90
[ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes this issue by getting vq from vblk, and removes
virtblk_init_hctx(). |
| In the Linux kernel, the following vulnerability has been resolved:
vp_vdpa: fix the crash in hot unplug with vp_vdpa
While unplugging the vp_vdpa device, it triggers a kernel panic
The root cause is: vdpa_mgmtdev_unregister() will accesses modern
devices which will cause a use after free.
So need to change the sequence in vp_vdpa_remove
[ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014
[ 195.004012] #PF: supervisor read access in kernel mode
[ 195.004486] #PF: error_code(0x0000) - not-present page
[ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0
[ 195.005578] Oops: 0000 1 PREEMPT SMP PTI
[ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1
[ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown
[ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[ 195.008059] RIP: 0010:ioread8+0x31/0x80
[ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7
[ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292
[ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0
[ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014
[ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68
[ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120
[ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805
[ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000
[ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0
[ 195.015741] PKRU: 55555554
[ 195.016001] Call Trace:
[ 195.016233] <TASK>
[ 195.016434] vp_modern_get_status+0x12/0x20
[ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa]
[ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa]
[ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net]
[ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net]
[ 195.018618] virtio_dev_remove+0x3d/0x90
[ 195.018986] device_release_driver_internal+0x1aa/0x230
[ 195.019466] bus_remove_device+0xd8/0x150
[ 195.019841] device_del+0x18b/0x3f0
[ 195.020167] ? kernfs_find_ns+0x35/0xd0
[ 195.020526] device_unregister+0x13/0x60
[ 195.020894] unregister_virtio_device+0x11/0x20
[ 195.021311] device_release_driver_internal+0x1aa/0x230
[ 195.021790] bus_remove_device+0xd8/0x150
[ 195.022162] device_del+0x18b/0x3f0
[ 195.022487] device_unregister+0x13/0x60
[ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa]
[ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa]
[ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa]
[ 195.024115] bus_for_each_dev+0x78/0xc0
[ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa]
[ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa]
[ 195.025353] pci_device_remove+0x36/0xa0
[ 195.025719] device_release_driver_internal+0x1aa/0x230
[ 195.026201] pci_stop_bus_device+0x6c/0x90
[ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20
[ 195.027039] disable_slot+0x49/0x90
[ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90
[ 195.027832] hotplug_event+0xea/0x210
[ 195.028171] ? hotplug_event+0x210/0x210
[ 195.028535] acpiphp_hotplug_notify+0x22/0x80
[ 195.028942] ? hotplug_event+0x210/0x210
[ 195.029303] acpi_device_hotplug+0x8a/0x1d0
[ 195.029690] acpi_hotplug_work_fn+0x1a/0x30
[ 195.030077] process_one_work+0x1e8/0x3c0
[ 195.030451] worker_thread+0x50/0x3b0
[ 195.030791] ? rescuer_thread+0x3a0/0x3a0
[ 195.031165] kthread+0xd9/0x100
[ 195.031459] ? kthread_complete_and_exit+0x20/0x20
[ 195.031899] ret_from_fork+0x22/0x30
[ 195.032233] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Silence oversized kvmalloc() warning
syzkaller triggered an oversized kvmalloc() warning.
Silence it by adding __GFP_NOWARN.
syzkaller log:
WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180
CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:__kvmalloc_node_noprof+0x175/0x180
RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246
RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b
RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002
RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000
R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ib_umem_odp_get+0x1f6/0x390
mlx5_ib_reg_user_mr+0x1e8/0x450
ib_uverbs_reg_mr+0x28b/0x440
ib_uverbs_write+0x7d3/0xa30
vfs_write+0x1ac/0x6c0
ksys_write+0x134/0x170
? __sanitizer_cov_trace_pc+0x1c/0x50
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive.
Not checking the active flag during refresh is particularly egregious, as
KVM can end up with a valid, inactive cache, which can lead to a variety
of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing
an mmu_notifier invalidation due to the cache not being on the list of
gfns to invalidate.
Note, "active" needs to be set if and only if the cache is on the list
of caches, i.e. is reachable via mmu_notifier events. If a relevant
mmu_notifier event occurs while the cache is "active" but not on the
list, KVM will not acquire the cache's lock and so will not serailize
the mmu_notifier event with active users and/or kvm_gpc_refresh().
A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND
can be exploited to trigger the bug.
1. Deactivate shinfo cache:
kvm_xen_hvm_set_attr
case KVM_XEN_ATTR_TYPE_SHARED_INFO
kvm_gpc_deactivate
kvm_gpc_unmap
gpc->valid = false
gpc->khva = NULL
gpc->active = false
Result: active = false, valid = false
2. Cause cache refresh:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
kvm_gpc_check
return -EWOULDBLOCK because !gpc->valid
kvm_xen_set_evtchn_fast
return -EWOULDBLOCK
kvm_gpc_refresh
hva_to_pfn_retry
gpc->valid = true
gpc->khva = not NULL
Result: active = false, valid = true
3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl
KVM_XEN_ATTR_TYPE_SHARED_INFO:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
read_lock gpc->lock
kvm_xen_hvm_set_attr case
KVM_XEN_ATTR_TYPE_SHARED_INFO
mutex_lock kvm->lock
kvm_xen_shared_info_init
kvm_gpc_activate
gpc->khva = NULL
kvm_gpc_check
[ Check passes because gpc->valid is
still true, even though gpc->khva
is already NULL. ]
shinfo = gpc->khva
pending_bits = shinfo->evtchn_pending
CRASH: test_and_set_bit(..., pending_bits) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
On 64 bit host, if the guest doesn't have X86_FEATURE_LM, KVM will
access 16 gprs to 32-bit smram image, causing out-ouf-bound ram
access.
On 32 bit host, the rsm_load_state_64/enter_smm_save_state_64
is compiled out, thus access overflow can't happen. |
| A flaw was found in KVM. An improper check in svm_set_x2apic_msr_interception() may allow direct access to host x2apic msrs when the guest resets its apic, potentially leading to a denial of service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
Should not call eventfd_ctx_put() in case of error.
[Introduce new goto target instead. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes
Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger
KASAN splat, as seen in the private_mem_conversions_test selftest.
When memory attributes are set on a GFN range, that range will have
specific properties applied to the TDP. A huge page cannot be used when
the attributes are inconsistent, so they are disabled for those the
specific huge pages. For internal KVM reasons, huge pages are also not
allowed to span adjacent memslots regardless of whether the backing memory
could be mapped as huge.
What GFNs support which huge page sizes is tracked by an array of arrays
'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of
lpage_info contains a vmalloc allocated array of these for a specific
supported page size. The kvm_lpage_info denotes whether a specific huge
page (GFN and page size) on the memslot is supported. These arrays include
indices for unaligned head and tail huge pages.
Preventing huge pages from spanning adjacent memslot is covered by
incrementing the count in head and tail kvm_lpage_info when the memslot is
allocated, but disallowing huge pages for memory that has mixed attributes
has to be done in a more complicated way. During the
KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in
the range that has mismatched attributes. KVM does this a memslot at a
time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info
for any huge page. This bit is essentially a permanently elevated count.
So huge pages will not be mapped for the GFN at that page size if the
count is elevated in either case: a huge head or tail page unaligned to
the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed
attributes.
To determine whether a huge page has consistent attributes, the
KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it
consistently has the incoming attribute. Since level - 1 huge pages are
aligned to level huge pages, it employs an optimization. As long as the
level - 1 huge pages are checked first, it can just check these and assume
that if each level - 1 huge page contained within the level sized huge
page is not mixed, then the level size huge page is not mixed. This
optimization happens in the helper hugepage_has_attrs().
Unfortunately, although the kvm_lpage_info array representing page size
'level' will contain an entry for an unaligned tail page of size level,
the array for level - 1 will not contain an entry for each GFN at page
size level. The level - 1 array will only contain an index for any
unaligned region covered by level - 1 huge page size, which can be a
smaller region. So this causes the optimization to overflow the level - 1
kvm_lpage_info and perform a vmalloc out of bounds read.
In some cases of head and tail pages where an overflow could happen,
callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not
required to prevent huge pages as discussed earlier. But for memslots that
are smaller than the 1GB page size, it does call hugepage_has_attrs(). In
this case the huge page is both the head and tail page. The issue can be
observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and
running the selftest “private_mem_conversions_test”, which produces the
output like the following:
BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110
Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169
Call Trace:
dump_stack_lvl
print_report
? __virt_addr_valid
? hugepage_has_attrs
? hugepage_has_attrs
kasan_report
? hugepage_has_attrs
hugepage_has_attrs
kvm_arch_post_set_memory_attributes
kvm_vm_ioctl
It is a little ambiguous whether the unaligned head page (in the bug case
also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set.
It is not functionally required, as the unal
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
During a module removal, kvm_exit invokes arch specific disable
call which disables AIA. However, we invoke aia_exit before kvm_exit
resulting in the following warning. KVM kernel module can't be inserted
afterwards due to inconsistent state of IRQ.
[25469.031389] percpu IRQ 31 still enabled on CPU0!
[25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150
[25469.031804] Modules linked in: kvm(-)
[25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2
[25469.031905] Hardware name: riscv-virtio,qemu (DT)
[25469.031928] epc : __free_percpu_irq+0xa2/0x150
[25469.031976] ra : __free_percpu_irq+0xa2/0x150
[25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50
[25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8
[25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90
[25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00
[25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8
[25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10
[25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f
[25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000
[25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0
[25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7
[25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7
[25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003
[25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150
[25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e
[25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm]
[25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm]
[25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc
[25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46
[25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134
[25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156
Invoke aia_exit and other arch specific cleanup functions after kvm_exit
so that disable gets a chance to be called first before exit. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobe: avoid out-of-bounds memory access of fetching args
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
ila: call nf_unregister_net_hooks() sooner
syzbot found an use-after-free Read in ila_nf_input [1]
Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().
It should be done in the reverse way, with a synchronize_rcu().
This is a good match for a pre_exit() method.
[1]
BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup include/linux/rhashtable.h:604 [inline]
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
prep_new_page mm/page_alloc.c:1501 [inline]
get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
__kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
__do_kmalloc_node mm/slub.c:4146 [inline]
__kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
__kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
bucket_table_alloc lib/rhashtable.c:186 [inline]
rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
ops_ini
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: cmd-db: Map shared memory as WC, not WB
Linux does not write into cmd-db region. This region of memory is write
protected by XPU. XPU may sometime falsely detect clean cache eviction
as "write" into the write protected region leading to secure interrupt
which causes an endless loop somewhere in Trust Zone.
The only reason it is working right now is because Qualcomm Hypervisor
maps the same region as Non-Cacheable memory in Stage 2 translation
tables. The issue manifests if we want to use another hypervisor (like
Xen or KVM), which does not know anything about those specific mappings.
Changing the mapping of cmd-db memory from MEMREMAP_WB to MEMREMAP_WT/WC
removes dependency on correct mappings in Stage 2 tables. This patch
fixes the issue by updating the mapping to MEMREMAP_WC.
I tested this on SA8155P with Xen. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group()
Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group().
It looks up `stt` from tablefd, but then continues to use it after doing
fdput() on the returned fd. After the fdput() the tablefd is free to be
closed by another thread. The close calls kvm_spapr_tce_release() and
then release_spapr_tce_table() (via call_rcu()) which frees `stt`.
Although there are calls to rcu_read_lock() in
kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent
the UAF, because `stt` is used outside the locked regions.
With an artifcial delay after the fdput() and a userspace program which
triggers the race, KASAN detects the UAF:
BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505
CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1
Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV
Call Trace:
dump_stack_lvl+0xb4/0x108 (unreliable)
print_report+0x2b4/0x6ec
kasan_report+0x118/0x2b0
__asan_load4+0xb8/0xd0
kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm]
kvm_vfio_set_attr+0x524/0xac0 [kvm]
kvm_device_ioctl+0x144/0x240 [kvm]
sys_ioctl+0x62c/0x1810
system_call_exception+0x190/0x440
system_call_vectored_common+0x15c/0x2ec
...
Freed by task 0:
...
kfree+0xec/0x3e0
release_spapr_tce_table+0xd4/0x11c [kvm]
rcu_core+0x568/0x16a0
handle_softirqs+0x23c/0x920
do_softirq_own_stack+0x6c/0x90
do_softirq_own_stack+0x58/0x90
__irq_exit_rcu+0x218/0x2d0
irq_exit+0x30/0x80
arch_local_irq_restore+0x128/0x230
arch_local_irq_enable+0x1c/0x30
cpuidle_enter_state+0x134/0x5cc
cpuidle_enter+0x6c/0xb0
call_cpuidle+0x7c/0x100
do_idle+0x394/0x410
cpu_startup_entry+0x60/0x70
start_secondary+0x3fc/0x410
start_secondary_prolog+0x10/0x14
Fix it by delaying the fdput() until `stt` is no longer in use, which
is effectively the entire function. To keep the patch minimal add a call
to fdput() at each of the existing return paths. Future work can convert
the function to goto or __cleanup style cleanup.
With the fix in place the test case no longer triggers the UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Disassociate vcpus from redistributor region on teardown
When tearing down a redistributor region, make sure we don't have
any dangling pointer to that region stored in a vcpu. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A
possible scenario is as follows:
process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
__vmalloc_area_node()
vm_area_alloc_pages()
--> oom-killer send SIGKILL to process-a
if (fatal_signal_pending(current)) break;
--> return NULL;
To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages()
if __GFP_NOFAIL set.
This issue occurred during OPLUS KASAN TEST. Below is part of the log
-> oom-killer sends signal to process
[65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198
[65731.259685] [T32454] Call trace:
[65731.259698] [T32454] dump_backtrace+0xf4/0x118
[65731.259734] [T32454] show_stack+0x18/0x24
[65731.259756] [T32454] dump_stack_lvl+0x60/0x7c
[65731.259781] [T32454] dump_stack+0x18/0x38
[65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump]
[65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump]
[65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc
[65731.260047] [T32454] notify_die+0x114/0x198
[65731.260073] [T32454] die+0xf4/0x5b4
[65731.260098] [T32454] die_kernel_fault+0x80/0x98
[65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8
[65731.260146] [T32454] do_bad_area+0x68/0x148
[65731.260174] [T32454] do_mem_abort+0x151c/0x1b34
[65731.260204] [T32454] el1_abort+0x3c/0x5c
[65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90
[65731.260248] [T32454] el1h_64_sync+0x68/0x6c
[65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258
--> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL);
kernel panic by NULL pointer dereference.
erofs assume kvmalloc with __GFP_NOFAIL never return NULL.
[65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c
[65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968
[65731.260339] [T32454] read_pages+0x170/0xadc
[65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30
[65731.260388] [T32454] page_cache_ra_order+0x24c/0x714
[65731.260411] [T32454] filemap_fault+0xbf0/0x1a74
[65731.260437] [T32454] __do_fault+0xd0/0x33c
[65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0
[65731.260486] [T32454] do_mem_abort+0x54c/0x1b34
[65731.260509] [T32454] el0_da+0x44/0x94
[65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4
[65731.260553] [T32454] el0t_64_sync+0x198/0x19c |
