| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix union collision of module and refcnt for dynamic events
In 'struct trace_event_call', the 'module' pointer and the 'refcnt'
atomic variable share the same memory space in a union. For dynamic
events, the union member is 'refcnt', which acts as an active
reference counter.
When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or
wprobe) has a non-zero reference count (e.g. due to active event
triggers or perf attachments), its 'call->module' evaluates to a
small non-zero integer instead of NULL.
When filtering or setting events for a specific module (e.g., writing
':mod:<module>' to 'set_event'), the code in
'__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads
'call->module' directly without checking whether the event is dynamic.
This causes the kernel to treat the small integer (refcnt) as a
'struct module' pointer, leading to a NULL/invalid pointer dereference
(Oops) when dereferencing the module name.
Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked
before treating 'call->module' as a valid pointer in these code paths. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix afs_edit_dir_remove() to get, not find, block 0
Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather
than afs_dir_find_block() as the latter caches the found block in the
afs_dir_iter and may[*] switch out the page it's on if another
afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does.
[*] There's more than one block per page. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL pointer dereference in rhash table destroy
When unbinding the ath12k driver, kernel NULL pointer dereferences
occur in irq_work_sync() called from rhashtable_destroy().
Two hash tables are affected:
1. ath12k_link_sta hash table in ath12k_base
2. ath12k_dp_link_peer hash table in ath12k_dp
The issue happens because the destroy functions are called unconditionally
in cleanup paths, but the hash tables are only initialized late in their
respective init functions. If the device was never fully started or if the
init functions failed before initializing the hash tables, the pointers
will be NULL. The issues are always reproducible from a VM because the MSI
addressing initialization is failing.
Call trace for ath12k_link_sta_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k]
ath12k_core_stop+0xe/0x80 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Call trace for ath12k_dp_link_peer_rhash_tbl_destroy:
RIP: irq_work_sync+0x1e/0x70
rhashtable_destroy+0x12/0x60
ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k]
ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k]
ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k]
ath12k_pci_remove+0x60/0x110 [ath12k]
Fix this by adding NULL checks before calling rhashtable_destroy() in
both destroy functions.
The NULL check approach was chosen because the rhashtable pointer
serves as the initialization state indicator. The init can fail at
various points, leaving some components uninitialized. Checking the
pointer directly is simpler than adding separate state flags that
would need synchronization. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: npcm-video: fix memory leaks in probe and remove
npcm_video_probe() allocates the npcm_video structure with kzalloc_obj()
but never frees it on any probe error path or in npcm_video_remove(),
leaking the allocation on every failed probe and every normal unbind.
Additionally, when npcm_video_setup_video() fails, the reserved memory
association established by of_reserved_mem_device_init() in
npcm_video_init() is not released, leaking the rmem_assigned_device
entry on the global list.
Fix both by adding kfree(video) to all probe error paths and to
npcm_video_remove(), and adding the missing
of_reserved_mem_device_release() call when npcm_video_setup_video()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe
Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call
v4l2_subdev_init_finalize() which allocates the subdev active state,
but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup()
calls v4l2_subdev_cleanup() to free it.
This causes a memory leak on every rmmod, reported by kmemleak:
unreferenced object 0xffff0000d06fc800 (size 192):
comm "(udev-worker)", pid 254, jiffies 4294913455
backtrace (crc 36eeae58):
kmemleak_alloc+0x34/0x40
__kvmalloc_node_noprof+0x5f8/0x7d8
__v4l2_subdev_state_alloc+0x1fc/0x30c
__v4l2_subdev_init_finalize+0x178/0x368
Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup()
in both crossbar and pipe cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: fix indefinite fence wait during GPU reset
pre_reset only force-completes fences of MAPPED queues. A queue in any
other state (e.g. mid-eviction) keeps its last_fence pending; after a
GPU reset that fence never signals, so the eviction/suspend worker and
process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and
wedge the machine:
INFO: task kworker/6:28 blocked for more than 120 seconds.
Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
Call Trace:
dma_fence_wait_timeout+0x7e/0x130
amdgpu_userq_evict+0x67/0x140 [amdgpu]
amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu]
process_scheduled_works+0xa6/0x420
Force-complete every queue's fence regardless of state. The unmap and
mark-hung step stays gated on MAPPED, since unmapping a queue that is
not mapped is invalid.
(cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma7.0: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit 9723a8bed3aa251a26bee4583bac9d8fb064dd44) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent tstamp ring allocation for non-PF VSI types
The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest
TxTime First) offload enabled. This bitmap is indexed by queue number
and is set by ice_offload_txtime(), which only operates on PF VSI
queues.
However, ice_is_txtime_ena() does not check the VSI type before
consulting the bitmap. When ETF offload is enabled on PF Tx queue 0,
bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset
rebuild, the CTRL VSI's Tx queue 0 is reconfigured and
ice_is_txtime_ena() is called for that ring. Since it only checks
pf->txtime_txqs by queue index without distinguishing VSI type, it
finds bit 0 set and returns true, matching the PF VSI's ETF queue,
not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously
allocate a tstamp_ring for the CTRL VSI ring.
Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring()
takes an early return at the !netdev check before reaching
ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset
leaks one 64-byte tstamp_ring.
Fix this by restricting ice_is_txtime_ena() to return true only for
PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues. |
| Use after Free in the annotator function of Zoom Clients may allow a meeting participant to achieve remote code execution of another participant via network access. |
| An issue in usememos v0.27.1 allows a remote attacker to achieve account takeover via the ssoCredentials branch of the SignIn handler in server/router/api/v1/auth_service.go, because SSO identity is matched only on an attacker-controllable identifier without binding to the IdP's stable subject claim. |
| Improper initialization in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT), and some Intel(R) Standard Manageability may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| OpenCart extensions are uploaded as zip files with .ocmod.zip extensions. Upon installation, the OpenCart v4.2.0.0 extension installer extracts these zip files, but does not validate that the extracted paths stay inside the intended extraction directory. An attacker can craft a malicious extension containing file path traversal sequences, such as ../. With this vulnerability, an attacker can write files, such as a PHP web shell, into the webroot directory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/rtp: Add RING_FORCE_TO_NONPRIV_DENY to OA whitelists
Unconditionally whitelisting OA registers is a security violation. Set
RING_FORCE_TO_NONPRIV_DENY bit in OA nonpriv slots, so that OA registers
don't get whitelisted by default after probe, gt reset, resume and engine
reset.
(cherry picked from commit 90511bdcfda97211c01f1d945d4ea616578d8fca) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Return error on non-migratable faults requiring devmem
Non-migratable faults that require devmem incorrectly jump to the 'out'
label, which squashes the error code intended to be returned to the
upper layers. Fix this by returning -EACCES instead.
(cherry picked from commit c4508edb2c723de93717272488ea65b165637eac) |
| TypeBot is a chatbot builder tool. Prior to version 3.17.0, the `handleGetSheets` API handler (`POST /api/sheets/getSheets`) does not validate workspace membership, allowing any authenticated user to access and decrypt another workspace's Google Sheets OAuth credentials and retrieve spreadsheet data (sheet names, IDs, column headers). Version 3.17.0 fixes the issue. |
| Sub2API is an AI API gateway platform designed to distribute and manage API quotas from AI product subscriptions. From 0.1.135, to 0.1.168, platform API keys issued to tenants are exchanged for upstream requests made with shared provider accounts (ChatGPT/Codex OAuth, OpenAI platform keys, or an operator-configured base URL) that belong to the operator, not to the caller. The `POST /responses/*subpath` wildcard routes spliced the client-supplied subpath into the upstream URL with no validation. This lets an authenticated tenant relay requests to arbitrary upstream endpoints using pooled account credentials via a path traversal. This vulnerability is fixed in 0.1.169. |
| TypeBot is a chatbot builder tool. Versions prior to 3.17.0 allow a low-privilege guest member of a workspace to exfiltrate stored OpenAI-compatible API keys by invoking the OpenAI model-listing helper with an attacker-controlled `baseUrl`. The vulnerable path decrypts the selected workspace credential, creates an OpenAI client with the secret in both `apiKey` and the explicit `api-key` header, and then sends the outbound request to the caller-supplied URL. Because the permission check accepts any readable workspace member and `listCredentials` reveals credential identifiers to guests, a guest can force the server to deliver the workspace secret to attacker infrastructure. Version 3.17.0 patches the issue. |
| Missing bounds check in the annotator function of Zoom Clients allows buffer over-write, which may allow a meeting participant to achieve remote code execution of another participant via network access. |
| Missing bounds check in the annotator function of Zoom Clients allows buffer over-read, which may allow a meeting participant to conduct a denial of service on another participant via network access. |
