Search vulnerabilities

Results 425,990

CVE-2026-90115

xsk: fix NULL pointer dereference in __xsk_rcv()

In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90129

virtio_balloon: quiesce balloon work before device shutdown

In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90130

vdpa_sim: fix cleanup after worker creation failure

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-90136

platform/x86/amd/hsmp: Reject negative power cap writes in hwmon

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-16515

ICMPv6 error messages sent for multicast-destined packets and non-unique source addresses enable network amplification in Zephyr's IPv6 stack

net_icmpv6_send_error() in subsys/net/ip/icmpv6.c implemented only one of the three RFC 4443 section 2.4 suppression rules (do not answer an ICMPv6 error with an ICMPv6 error). It did not check whether the triggering packet's source address identifies a single node (rule e.6) or whether the packet was sent to a multicast destination (rule e.3, whose only exceptions are Packet Too Big and Parameter Problem Code 2). Of the five call sites, only the port-unreachable path in subsys/net/ip/connection.c carried an equivalent guard of its own; the extension-header, unknown-next-header and fragmentation paths in subsys/net/ip/ipv6.c and subsys/net/ip/ipv6_fragment.c had none. An unauthenticated attacker with access to the same link can exploit this in two ways. Sending a single IPv6 packet to the link-local all-nodes group ff02::1 carrying an unrecognized next-header value, with the source address spoofed to a chosen victim, causes every Zephyr node on the link to emit an ICMPv6 Parameter Problem message to that victim — a reflector with an amplification factor equal to the number of nodes. Alternatively, sending a unicast packet whose source address is a multicast address causes the node to transmit its ICMPv6 error to that multicast address, turning one unicast packet into a link-flooded multicast frame. Packets addressed to ff02::1 are accepted unconditionally by ipv6_input(), and no check rejects a multicast source address, so no special configuration is required. The impact is degraded availability of the shared link and of the reflection victim, together with the ability for the attacker to hide its own address behind the responding nodes. The effect is amplified on constrained mesh links such as 802.15.4/Thread, where link-local multicast is flooded hop by hop. There is no memory-safety consequence: the error packet itself is well formed, it is simply emitted in cases where the protocol forbids it. The fix adds both suppression checks at the single choke point in net_icmpv6_send_error(), before any reply packet is allocated, preserving the RFC-mandated exceptions for NET_ICMPV6_PACKET_TOO_BIG and Parameter Problem Code 2. Note that the IPv4 counterpart net_icmpv4_send_error() in subsys/net/ip/icmpv4.c still checks only for a broadcast destination and retains an equivalent gap for multicast destinations and non-unique sources.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-44639

NanoMQ: O(N²) Denial of Service in MQTT v5 Property Parsing

NanoMQ is an MQTT broker. Prior to 0.24.14, NanoMQ's MQTT v5 property decoder in nng/src/supplemental/mqtt/mqtt_codec.c uses property_append() to walk the entire linked list for each property added by decode_buf_properties(). A remote unauthenticated client can supply a PUBLISH or SUBSCRIBE packet containing many User Properties, causing O(N²) linked-list insertion and CPU work that makes the broker unresponsive; repeated packets can sustain the denial of service. This issue is fixed in version 0.24.14.

CVSS 3.1 · 3.7 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-61633

NanoMQ: Infinite Loop in UNSUBSCRIBE Decoder Leading to Remote DoS

NanoMQ is an MQTT broker. Prior to 0.24.14, the NanoMQ client function nni_mqtt_msg_decode_unsubscribe() in nng/src/supplemental/mqtt/mqtt_codec.c does not handle a failed read_uint16() while counting topics in a malformed UNSUBSCRIBE packet. A zero-length topic followed by trailing data can leave buf.curpos unchanged while topic_count continues to increase, allowing a malicious MQTT broker to hang a connecting MQTT 3.1.1 client, consume CPU and memory, and repeatedly deny service when automatic reconnection is enabled. The broker-side nmq_unsubinfo_decode path is not affected. This issue is fixed in version 0.24.14.

CVSS 3.1 · 2 Low EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-92355

In affected versions of Octopus Server, a user with permission to modify non built-in external feeds could exploit a path traversal flaw to overwrite arbitrary files on the server, which in some configurations could lead to remote code execution.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-81326

QND uses a hard-coded cryptographic key, which may allow a local attacker who is logged in to a Windows PC where the affected product's client is installed to obtain administrator credentials, including an ID and password.

CVSS 4.0 · 6.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-84408

QND contains an improper access control vulnerability in a named pipe, which may allow a local attacker who is logged in to a Windows PC where the affected product's client is installed to execute arbitrary commands with SYSTEM privileges.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-73461

Security Advisory 0163

On affected EOS platforms with AAA-based gRPC authorization enabled for OpenConfig, gRPC requests of an authenticated user to OpenConfig may use the wrong privilege level, resulting in an authorization using the wrong AAA method list. This does not impact non-gRPC OpenConfig requests such as NETCONF.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73439

Security Advisory 0164

On affected platforms running Arista EOS, if OpenConfig is configured and running a gNMI server on the system, and if gNSI Pathz is configured and a gNSI Pathz policy is present on the system, then gNMI may fail to correctly enforce the rules in this policy if both a group rule and a user rule for the same path is present in the policy. Under certain conditions, this can lead to an authenticated user gaining unauthorized permission to read or write gNMI paths that the Pathz policy is intended to restrict.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73454

Security Advisory 0165

On affected platforms running Arista EOS with gRPC Network Security Interface (gNSI) Credentialz configured, a specially crafted request can cause unintended modifications to the target account's properties. This may result in the account being assigned elevated privileges or access beyond what an administrator intended.

CVSS 4.0 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73464

Security Advisory 0166

On affected platforms running Arista EOS with gRPC Network Management Interface (gNMI) enabled, a specially crafted request could allow a malicious authenticated client with gRPC Network Management Interface (gNMI) access to execute arbitrary code with root privileges on the switch.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-2380

Security Advisory 0168

On affected platforms running Arista EOS with OpenConfig-related services (i.e., gNMI, gNSI, RESTCONF and NETCONF), sensitive requests and responses may be unintentionally logged. These may be stored on the local EOS device or recorded on remote accounting servers. Note that gRPC-based streaming via Streaming Telemetry Agent to CloudVision is not affected by this vulnerability. Examples of sensitive information include: - Sensitive CLI commands (e.g., "username bob secret myPass") - Sensitive OpenConfig YANG leafs (e.g., "system/aaa/global/tacacs/config/secret-key") This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks.

CVSS 4.0 · 5.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73463

Security Advisory 0169

On affected platforms running Arista EOS, when multiple gRPC Network Security Interface (gNSI) transports are configured, a race condition in the gNSI Authz service may cause a policy rotation to fail silently. An authenticated user whose access was revoked by the new policy may retain unauthorized access to gRPC interfaces. This does not affect Bootz. This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73438

Security Advisory 0172

On affected platforms running Arista EOS with Open Shortest Path First version 3 (OSPFv3) configured, an unauthenticated attacker on the same OSPFv3 broadcast domain can send a specially crafted set of packets that can cause the Ospf3 agent to restart unexpectedly. The crash results in the loss of all OSPFv3 adjacencies on the affected device and may disrupt routing across the broader OSPF domain until the agent recovers. This issue was reported externally by Dravanet Inc., and Arista is not aware of any malicious exploitation of this vulnerability in customer networks.

CVSS 4.0 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73455

Security Advisory 0173

On affected platforms running Arista EOS with Open Shortest Path First version 3 (OSPFv3) configured, a specially crafted packet can cause the OSPFv3 agent to restart unexpectedly.

CVSS 4.0 · 8.9 High EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2026-73453

Security Advisory 0174

An unauthenticated P4Runtime (Programming Protocol-Independent Packet Processors Runtime) client can achieve arbitrary code execution under certain conditions on affected platforms running Arista EOS configured with P4Runtime. P4Runtime is disabled by default in Arista EOS. By crafting a malicious packet during the initiation of a P4Runtime session, an attacker can obtain complete administrative control over the compromised switch. This issue was discovered internally by Arista, and the company is not aware of any malicious exploitation of this vulnerability in customer networks.

CVSS 4.0 · 9.5 Critical EPSS < 1% KEV · Not listed
Vendors
Products
Eos
CVE-2025-36591

Broken cryptographic algorithm leading to information exposure in Dell ECS and ObjectScale

Dell ECS versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.4.0.0, contains an Use of a Broken or Risky Cryptographic Algorithm vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Information exposure.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors