| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.12 and earlier, when the `AuthType` is set to anything but `Basic`, if the request contains an `Authorization: Basic ...` header, the password is not checked. This results in authentication bypass. Any configuration that allows an `AuthType` that is not `Basic` is affected. Version 2.4.13 fixes the issue. |
| Flask-AppBuilder is an application development framework. Prior to version 4.8.1, when Flask-AppBuilder is configured to use OAuth, LDAP, or other non-database authentication methods, the password reset endpoint remains registered and accessible, despite not being displayed in the user interface. This allows an enabled user to reset their password and be able to create JWT tokens even after the user is disabled on the authentication provider. Users should upgrade to Flask-AppBuilder version 4.8.1 or later to receive a fix. If immediate upgrade is not possible, manually disable password reset routes in the application configuration; implement additional access controls at the web server or proxy level to block access to the reset my password URL; and/or monitor for suspicious password reset attempts from disabled accounts. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.12 and earlier, an unsafe deserialization and validation of printer attributes causes null dereference in the libcups library. This is a remote DoS vulnerability available in local subnet in default configurations. It can cause the cups & cups-browsed to crash, on all the machines in local network who are listening for printers (so by default for all regular linux machines). On systems where the vulnerability CVE-2024-47176 (cups-filters 1.x/cups-browsed 2.x vulnerability) was not fixed, and the firewall on the machine does not reject incoming communication to IPP port, and the machine is set to be available to public internet, attack vector "Network" is possible. The current versions of CUPS and cups-browsed projects have the attack vector "Adjacent" in their default configurations. Version 2.4.13 contains a patch for CVE-2025-58364. |
| Axios is a promise based HTTP client for the browser and Node.js. When Axios prior to version 1.11.0 runs on Node.js and is given a URL with the `data:` scheme, it does not perform HTTP. Instead, its Node http adapter decodes the entire payload into memory (`Buffer`/`Blob`) and returns a synthetic 200 response. This path ignores `maxContentLength` / `maxBodyLength` (which only protect HTTP responses), so an attacker can supply a very large `data:` URI and cause the process to allocate unbounded memory and crash (DoS), even if the caller requested `responseType: 'stream'`. Version 1.11.0 contains a patch for the issue. |
| matrix-sdk-base is the base component to build a Matrix client library. In matrix-sdk-base before 0.14.1, calling the `RoomMember::normalized_power_level()` method can cause a panic if a room member has a power level of `Int::Min`. The issue is fixed in matrix-sdk-base 0.14.1. The affected method isn’t used internally, so avoiding calling `RoomMember::normalized_power_level()` prevents the panic. |
| AIRI is a self-hosted, artificial intelligence based Grok Companion. In v0.7.2-beta.2 in the `packages/stage-ui/src/components/MarkdownRenderer.vue` path, the Markdown content is processed using the useMarkdown composable, and the processed HTML is rendered directly into the DOM using v-html. An attacker creates a card file containing malicious HTML/JavaScript, then simply processes it using the highlightTagToHtml function (which simply replaces template tags without HTML escaping), and then directly renders it using v-html, leading to cross-site scripting (XSS). The project also exposes the Tauri API, which can be called from the frontend. The MCP plugin exposes a command execution interface function in `crates/tauri-plugin-mcp/src/lib.rs`. This allows arbitrary command execution. `connect_server` directly passes the user-supplied `command` and `args` parameters to `Command::new(command).args(args)` without any input validation or whitelisting. Thus, the previous XSS exploit could achieve command execution through this interface. v0.7.2-beta.3 fixes the issue. |
| A potential insufficient access control vulnerability was reported in the Lenovo Dispatcher 3.0 and Dispatcher 3.1 drivers used by some Lenovo consumer notebooks that could allow an authenticated local user to execute code with elevated privileges. The Lenovo Dispatcher 3.2 driver is not affected. This vulnerability does not affect systems when the Windows feature Core Isolation Memory Integrity is enabled. Lenovo systems preloaded with Windows 11 have this feature enabled by default. |
| An internal product security audit of Lenovo XClarity Orchestrator (LXCO) discovered the below vulnerability:
An attacker with access to a device on the local Lenovo XClarity Orchestrator (LXCO) network segment may be able to manipulate the local device to create an alternate communication channel which could allow the attacker, under certain conditions, to directly interact with backend LXCO API services typically inaccessible to users. While access controls may limit the scope of interaction, this could result in unauthorized access to internal functionality or data. This issue is not exploitable from remote networks. |
| A potential DLL hijacking vulnerability was discovered in Lenovo Browser during an internal security assessment that could allow a local user to execute code with elevated privileges. |
| A missing authentication vulnerability was reported in some Lenovo printers that could allow a user to view limited device information or modify network settings via the CUPS service. |
| The The Events Calendar plugin for WordPress is vulnerable to time-based SQL Injection via the ‘s’ parameter in all versions up to, and including, 6.15.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix scheduling while atomic in decompression path
[ 16.945668][ C0] Call trace:
[ 16.945678][ C0] dump_backtrace+0x110/0x204
[ 16.945706][ C0] dump_stack_lvl+0x84/0xbc
[ 16.945735][ C0] __schedule_bug+0xb8/0x1ac
[ 16.945756][ C0] __schedule+0x724/0xbdc
[ 16.945778][ C0] schedule+0x154/0x258
[ 16.945793][ C0] bit_wait_io+0x48/0xa4
[ 16.945808][ C0] out_of_line_wait_on_bit+0x114/0x198
[ 16.945824][ C0] __sync_dirty_buffer+0x1f8/0x2e8
[ 16.945853][ C0] __f2fs_commit_super+0x140/0x1f4
[ 16.945881][ C0] f2fs_commit_super+0x110/0x28c
[ 16.945898][ C0] f2fs_handle_error+0x1f4/0x2f4
[ 16.945917][ C0] f2fs_decompress_cluster+0xc4/0x450
[ 16.945942][ C0] f2fs_end_read_compressed_page+0xc0/0xfc
[ 16.945959][ C0] f2fs_handle_step_decompress+0x118/0x1cc
[ 16.945978][ C0] f2fs_read_end_io+0x168/0x2b0
[ 16.945993][ C0] bio_endio+0x25c/0x2c8
[ 16.946015][ C0] dm_io_dec_pending+0x3e8/0x57c
[ 16.946052][ C0] clone_endio+0x134/0x254
[ 16.946069][ C0] bio_endio+0x25c/0x2c8
[ 16.946084][ C0] blk_update_request+0x1d4/0x478
[ 16.946103][ C0] scsi_end_request+0x38/0x4cc
[ 16.946129][ C0] scsi_io_completion+0x94/0x184
[ 16.946147][ C0] scsi_finish_command+0xe8/0x154
[ 16.946164][ C0] scsi_complete+0x90/0x1d8
[ 16.946181][ C0] blk_done_softirq+0xa4/0x11c
[ 16.946198][ C0] _stext+0x184/0x614
[ 16.946214][ C0] __irq_exit_rcu+0x78/0x144
[ 16.946234][ C0] handle_domain_irq+0xd4/0x154
[ 16.946260][ C0] gic_handle_irq.33881+0x5c/0x27c
[ 16.946281][ C0] call_on_irq_stack+0x40/0x70
[ 16.946298][ C0] do_interrupt_handler+0x48/0xa4
[ 16.946313][ C0] el1_interrupt+0x38/0x68
[ 16.946346][ C0] el1h_64_irq_handler+0x20/0x30
[ 16.946362][ C0] el1h_64_irq+0x78/0x7c
[ 16.946377][ C0] finish_task_switch+0xc8/0x3d8
[ 16.946394][ C0] __schedule+0x600/0xbdc
[ 16.946408][ C0] preempt_schedule_common+0x34/0x5c
[ 16.946423][ C0] preempt_schedule+0x44/0x48
[ 16.946438][ C0] process_one_work+0x30c/0x550
[ 16.946456][ C0] worker_thread+0x414/0x8bc
[ 16.946472][ C0] kthread+0x16c/0x1e0
[ 16.946486][ C0] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix null pointer dereference in ovl_permission()
Following process:
P1 P2
path_lookupat
link_path_walk
inode_permission
ovl_permission
ovl_i_path_real(inode, &realpath)
path->dentry = ovl_i_dentry_upper(inode)
drop_cache
__dentry_kill(ovl_dentry)
iput(ovl_inode)
ovl_destroy_inode(ovl_inode)
dput(oi->__upperdentry)
dentry_kill(upperdentry)
dentry_unlink_inode
upperdentry->d_inode = NULL
realinode = d_inode(realpath.dentry) // return NULL
inode_permission(realinode)
inode->i_sb // NULL pointer dereference
, will trigger an null pointer dereference at realinode:
[ 335.664979] BUG: kernel NULL pointer dereference,
address: 0000000000000002
[ 335.668032] CPU: 0 PID: 2592 Comm: ls Not tainted 6.3.0
[ 335.669956] RIP: 0010:inode_permission+0x33/0x2c0
[ 335.678939] Call Trace:
[ 335.679165] <TASK>
[ 335.679371] ovl_permission+0xde/0x320
[ 335.679723] inode_permission+0x15e/0x2c0
[ 335.680090] link_path_walk+0x115/0x550
[ 335.680771] path_lookupat.isra.0+0xb2/0x200
[ 335.681170] filename_lookup+0xda/0x240
[ 335.681922] vfs_statx+0xa6/0x1f0
[ 335.682233] vfs_fstatat+0x7b/0xb0
Fetch a reproducer in [Link].
Use the helper ovl_i_path_realinode() to get realinode and then do
non-nullptr checking. |
| In the Linux kernel, the following vulnerability has been resolved:
VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF
The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.
general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix possible underflow for displays with large vblank
[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate
[How]
Simplify calculation of vblank_nom
Increase value for VBlankNomDefaultUS to 800us |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix FFA device names for logical partitions
Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.
However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:
| sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
| Hardware name: FVP Base RevC (DT)
| Call trace:
| dump_backtrace+0xf8/0x118
| show_stack+0x18/0x24
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| sysfs_create_dir_ns+0xe0/0x13c
| kobject_add_internal+0x220/0x3d4
| kobject_add+0x94/0x100
| device_add+0x144/0x5d8
| device_register+0x20/0x30
| ffa_device_register+0x88/0xd8
| ffa_setup_partitions+0x108/0x1b8
| ffa_init+0x2ec/0x3a4
| do_one_initcall+0xcc/0x240
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x100/0x16c
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
| kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
| register things with the same name in the same directory.
| arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
| ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001
By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.
So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
Use hid_device for devm allocation of the input_dev name to avoid a
use-after-free. input_unregister_device would trigger devres cleanup of all
resources associated with the input_dev, free-ing the name. The name would
subsequently be used in a uevent fired at the end of unregistering the
input_dev. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
hci_update_accept_list_sync iterates over hdev->pend_le_conns and
hdev->pend_le_reports, and waits for controller events in the loop body,
without holding hdev lock.
Meanwhile, these lists and the items may be modified e.g. by
le_scan_cleanup. This can invalidate the list cursor or any other item
in the list, resulting to invalid behavior (eg use-after-free).
Use RCU for the hci_conn_params action lists. Since the loop bodies in
hci_sync block and we cannot use RCU or hdev->lock for the whole loop,
copy list items first and then iterate on the copy. Only the flags field
is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we
read valid values.
Free params everywhere with hci_conn_params_free so the cleanup is
guaranteed to be done properly.
This fixes the following, which can be triggered e.g. by BlueZ new
mgmt-tester case "Add + Remove Device Nowait - Success", or by changing
hci_le_set_cig_params to always return false, and running iso-tester:
==================================================================
BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
kasan_report (mm/kasan/report.c:538)
? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841)
? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780)
? mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_lock (kernel/locking/mutex.c:282)
? __pfx_mutex_unlock (kernel/locking/mutex.c:538)
? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:306)
process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538)
? __pfx_worker_thread (kernel/workqueue.c:2480)
kthread (kernel/kthread.c:376)
? __pfx_kthread (kernel/kthread.c:331)
ret_from_fork (arch/x86/entry/entry_64.S:314)
</TASK>
Allocated by task 31:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
__kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383)
hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277)
hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589)
hci_connect_cis (net/bluetooth/hci_conn.c:2266)
iso_connect_cis (net/bluetooth/iso.c:390)
iso_sock_connect (net/bluetooth/iso.c:899)
__sys_connect (net/socket.c:2003 net/socket.c:2020)
__x64_sys_connect (net/socket.c:2027)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Freed by task 15:
kasan_save_stack (mm/kasan/common.c:46)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/generic.c:523)
__kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244)
__kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800)
hci_conn_params_del (net/bluetooth/hci_core.c:2323)
le_scan_cleanup (net/bluetooth/hci_conn.c:202)
process_one_work (./arch/x86/include/asm/preempt.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 1373 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:dmi_sysfs_entry_release
...
Call Trace:
<TASK>
kobject_put
dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs
dmi_decode_table (drivers/firmware/dmi_scan.c:133)
dmi_walk (drivers/firmware/dmi_scan.c:1115)
dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs
do_one_initcall (init/main.c:1296)
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x4000000 from 0xffffffff81000000
---[ end Kernel panic - not syncing: Fatal exception ]---
It is because previous patch added kobject_put() to release the memory
which will call dmi_sysfs_entry_release() and list_del().
However, list_add_tail(entry->list) is called after the error block,
so the list_head is uninitialized and cannot be deleted.
Move error handling to after list_add_tail to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing. |
