| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in vas3k TaxHacker up to 0.8.2. The affected element is the function envSchema.parse of the file lib/config.ts of the component JWT Secret Handler. The manipulation of the argument BETTER_AUTH_SECRET leads to hard-coded credentials. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in vas3k TaxHacker up to 0.8.2. Impacted is the function buildImapConfig of the file lib/email-sync/imap-client.ts of the component Email Sync. Executing a manipulation of the argument host/port can lead to server-side request forgery. It is possible to launch the attack remotely. The pull request to fix this issue awaits acceptance. |
| A vulnerability was found in SourceCodester Stock Management System 1.0. This issue affects some unknown processing of the file /php_action/getOrderReport.php. Performing a manipulation of the argument clientName/clientContact results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| A vulnerability has been found in SourceCodester Stock Management System 1.0. This vulnerability affects unknown code of the file /php_action/printOrder.php. Such manipulation of the argument clientName/clientContact leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. |
| A flaw has been found in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. This affects an unknown part of the component Management Mutation Handler. This manipulation of the argument roll_no/name/father_name/class/mobile/email/password/remark causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. Affected by this issue is some unknown functionality of the component Dashboard. The manipulation of the argument roll_no/teacher_name results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A security vulnerability has been detected in SourceCodester Class and Exam Timetabling System 1.0. Affected by this vulnerability is an unknown functionality of the file /BSIT2.php. The manipulation of the argument course leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. |
| The PPWP – Password Protect Pages plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.9.18 via deserialization of untrusted input from the 'post_protection_roles' vulnerable parameter. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| A weakness has been identified in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /BSIS1.php. Executing a manipulation of the argument course can lead to cross site scripting. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was determined in alexta69 MeTube up to 2026.06.10. The impacted element is an unknown function of the file /download/.metube/cookies.txt of the component Cookie File Handler. This manipulation causes files or directories accessible. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2026.06.20 is sufficient to resolve this issue. Patch name: ce897ee00903bf7ded406f0d7852d95dd4164add. You should upgrade the affected component. |
| The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 4.9.8 via the get_image_src_in_base64 function. This makes it possible for authenticated attackers, with subscriber-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The base64-encoded file contents are embedded into the cached invoice HTML and served directly to the attacker via the plugin's own Print/Download invoice endpoints, which require only a valid nonce and access key. |
| A vulnerability was found in Comfast CF-N1-S 2.6.0.1. The affected element is the function sub_41AD7C of the file /cgi-bin/mbox-config?method=SET§ion=ntp_timezone of the component Web Management. The manipulation of the argument timestr/ntp_client_enabled results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fix use-after-free in fib_nhc_update_mtu()
fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding fnhe_lock.
The following interleaving can therefore occur:
CPU 0 CPU 1
fib_nhc_update_mtu() update_or_create_fnhe()
load fnhe spin_lock_bh(&fnhe_lock)
fnhe_remove_oldest()
unlink fnhe
kfree_rcu(fnhe, rcu)
<quiescent state>
access fnhe after grace period
KASAN reported:
BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
Read of size 8 at addr ffff888107d49000 by task poc/90
Call Trace:
fib_nhc_update_mtu+0x3df/0x410
fib_sync_mtu+0x7a/0xd0
fib_netdev_event+0x229/0x3f0
netif_set_mtu_ext+0x33a/0x570
dev_set_mtu+0x88/0x120
The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a
pair and other writers serialize them with fnhe_lock. RCU alone prevents
reclamation, but would still allow concurrent writers to leave a mixed
pair.
Walk the table under RCU and acquire fnhe_lock only while updating each
exception. RCU keeps the current entry alive while the short critical
section serializes its paired PMTU fields. This avoids holding the global
lock while scanning all 2048 buckets for every nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: ipheth: fix carrier_work UAF on disconnect
ipheth_sndbulk_callback() re-arms the carrier-check work on any
non-zero URB status:
else
schedule_delayed_work(&dev->carrier_work, 0);
Nothing ties that to the interface being up, so the work can be armed
again after ipheth_close() has already drained it, and stay armed
until the netdev whose private area embeds it is freed.
On unplug with a TX URB in flight, ipheth_disconnect() drains the work
through unregister_netdev() -> ipheth_close() ->
cancel_delayed_work_sync() and only then calls ipheth_kill_urbs().
usb_kill_urb() completes the in-flight TX URB with -ENOENT, so
ipheth_sndbulk_callback() runs after the drain and re-arms
carrier_work.
The same completion also re-arms the work if the interface is only
brought down while a TX URB is in flight, and
ipheth_carrier_check_work() then keeps re-queueing itself once a
second. unregister_netdev() does not call ipheth_close() for an
already-down interface, so nothing drains it on the later unplug
either.
In both cases free_netdev() frees the netdev while carrier_work is
still pending, and ipheth_carrier_check_work() dereferences freed
memory.
Tie the work to the interface state instead of chasing the completion:
disable it in ipheth_close() and enable it in ipheth_open(), so a
schedule_delayed_work() from the URB completion is a no-op whenever
the interface is not up. disable_delayed_work_sync() also waits for a
running instance, so it fully replaces the cancel_delayed_work_sync()
it takes the place of. The work starts out disabled in ipheth_probe()
so the enable/disable counts balance from the first open.
Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and
raw-gadget standing in for the device, driving the second path above (the
interface is already down, so unregister_netdev() does not call
ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in
__run_timers(), freed by ipheth_disconnect() and re-armed from
ipheth_sndbulk_callback() via queue_delayed_work_on(). The
same trigger on a kernel differing only by this patch reports 0 of 15,
and the carrier check still functions across open/close cycles.
The reproducer needs an attached USB device that stops draining bulk OUT,
plus a link down and unplug, driven as root. It is not a privilege
boundary crossing and no exploit primitive was developed.
Found by 0sec (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Pin the 'struct nfs_server' during a FREE_STATEID call
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight. |
| The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool.
airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted.
The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot.
The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact. |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
