| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Pauple Table & Contact Form 7 Database – Tablesome.This issue affects Table & Contact Form 7 Database – Tablesome: from n/a through 1.0.33. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Automattic Newspack Blocks.This issue affects Newspack Blocks: from n/a through 3.0.8. |
| EndpointRequest.to() creates a matcher for null/** if the actuator endpoint, for which the EndpointRequest has been created, is disabled or not exposed.
Your application may be affected by this if all the following conditions are met:
* You use Spring Security
* EndpointRequest.to() has been used in a Spring Security chain configuration
* The endpoint which EndpointRequest references is disabled or not exposed via web
* Your application handles requests to /null and this path needs protection
You are not affected if any of the following is true:
* You don't use Spring Security
* You don't use EndpointRequest.to()
* The endpoint which EndpointRequest.to() refers to is enabled and is exposed
* Your application does not handle requests to /null or this path does not need protection |
| Improper input validation in some firmware for some Intel(R) Graphics Drivers and Intel LTS kernels within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Kaillera Server version 0.86 is vulnerable to a denial-of-service condition triggered by sending a malformed UDP packet after the initial handshake. Once a client sends a valid HELLO0.83 packet and receives a response, any subsequent malformed packet causes the server to crash and become unresponsive. This flaw stems from improper input validation in the server’s UDP packet handler, allowing unauthenticated remote attackers to disrupt service availability. |
| Improper input validation in UserAuthenticationSmm driver in UEFI firmware for some Intel(R) Server D50DNP Family products may allow a privileged user to enable escalation of privilege via local access. |
| Improper input validation in PprRequestLog module in UEFI firmware for some Intel(R) Server D50DNP Family products may allow a privileged user to enable escalation of privilege via local access. |
| CVE-2024-38820 ensured Locale-independent, lowercase conversion for both the configured disallowedFields patterns and for request parameter names. However, there are still cases where it is possible to bypass the disallowedFields checks.
Affected Spring Products and Versions
Spring Framework:
* 6.2.0 - 6.2.6
* 6.1.0 - 6.1.19
* 6.0.0 - 6.0.27
* 5.3.0 - 5.3.42
* Older, unsupported versions are also affected
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix Version Availability 6.2.x
6.2.7
OSS6.1.x
6.1.20
OSS6.0.x
6.0.28
Commercial https://enterprise.spring.io/ 5.3.x
5.3.43
Commercial https://enterprise.spring.io/
No further mitigation steps are necessary.
Generally, we recommend using a dedicated model object with properties only for data binding, or using constructor binding since constructor arguments explicitly declare what to bind together with turning off setter binding through the declarativeBinding flag. See the Model Design section in the reference documentation.
For setting binding, prefer the use of allowedFields (an explicit list) over disallowedFields.
Credit
This issue was responsibly reported by the TERASOLUNA Framework Development Team from NTT DATA Group Corporation. |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. |
| Improper input validation in firmware for some Intel(R) Server M20NTP Family UEFI may allow a privileged user to potentially enable escalation of privilege via local access. |
| When incoming DNS over HTTPS support is enabled using the nghttp2 provider, and queries are routed to a tcp-only or DNS over TLS backend, an attacker can trigger an assertion failure in DNSdist by sending a request for a zone transfer (AXFR or IXFR) over DNS over HTTPS, causing the process to stop and thus leading to a Denial of Service. DNS over HTTPS is not enabled by default, and backends are using plain DNS (Do53) by default. |
| A crafted response from an upstream server the recursor has been configured to forward-recurse to can cause a Denial of Service in the Recursor. The default configuration of the Recursor does not use recursive forwarding and is not affected. |
| An improper authorization level has been detected in the login panel. It may lead to
unauthenticated Server Side Request Forgery and allows to perform open services
enumeration. Server makes query to provided server (Server IP/DNS field) and is
triggering connection to arbitrary address.
|
| Description: VMware NSX contains a username enumeration vulnerability. An unauthenticated malicious actor may exploit this to enumerate valid usernames, potentially leading to unauthorized access attempts.
Impact: Username enumeration → facilitates unauthorized access.
Attack Vector: Remote, unauthenticated.
Severity: Important.
CVSSv3: 7.5 (High).
Acknowledgments: Reported by the National Security Agency.
Affected Products:
* VMware NSX 9.x.x.x, 4.2.x, 4.1.x, 4.0.x
* NSX-T 3.x
* VMware Cloud Foundation (with NSX) 5.x, 4.5.x
Fixed Versions:
* NSX 9.0.1.0; 4.2.2.2/4.2.3.1 http://4.2.2.2/4.2.3.1 ; 4.1.2.7; NSX-T 3.2.4.3; CCF async patch (KB88287).
Workarounds: None. |
| A vulnerability has been identified in SIMATIC S7-PLCSIM V17 (All versions), SIMATIC S7-PLCSIM V18 (All versions), SIMATIC STEP 7 Safety V17 (All versions < V17 Update 9), SIMATIC STEP 7 Safety V18 (All versions), SIMATIC STEP 7 Safety V19 (All versions < V19 Update 4), SIMATIC STEP 7 V17 (All versions < V17 Update 9), SIMATIC STEP 7 V18 (All versions), SIMATIC STEP 7 V19 (All versions < V19 Update 4), SIMATIC WinCC Unified PC Runtime V18 (All versions), SIMATIC WinCC Unified PC Runtime V19 (All versions < V19 Update 4), SIMATIC WinCC Unified V17 (All versions < V17 Update 9), SIMATIC WinCC Unified V18 (All versions), SIMATIC WinCC Unified V19 (All versions < V19 Update 4), SIMATIC WinCC V17 (All versions < V17 Update 9), SIMATIC WinCC V18 (All versions), SIMATIC WinCC V19 (All versions < V19 Update 4), SIMOCODE ES V17 (All versions), SIMOCODE ES V18 (All versions), SIMOCODE ES V19 (All versions), SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SINAMICS Startdrive V19 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Safety ES V19 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V19 (TIA Portal) (All versions), TIA Portal Cloud V17 (All versions), TIA Portal Cloud V18 (All versions), TIA Portal Cloud V19 (All versions < V5.2.1.1). The affected devices do not properly sanitize user-controllable input when parsing user settings. This could allow an attacker to locally execute arbitrary commands in the host operating system with the privileges of the user. |
| Incomplete fix for CVE-2024-1929
The problem with CVE-2024-1929 was that the dnf5 D-Bus daemon accepted arbitrary configuration parameters from unprivileged users, which allowed a
local root exploit by tricking the daemon into loading a user controlled "plugin". All of this happened before Polkit authentication was even started.
The dnf5 library code does not check whether non-root users control the directory in question.
On one hand, this poses a Denial-of-Service attack vector by making the daemonoperate on a blocking file (e.g. named FIFO special file) or a very large file
that causes an out-of-memory situation (e.g. /dev/zero). On the other hand, this can be used to let the daemon process privileged files like /etc/shadow.
The file in question is parsed as an INI file. Error diagnostics resulting from parsing privileged files could cause information leaks, if these diagnostics
are accessible to unprivileged users. In the case of libdnf5, no such user accessible diagnostics should exist, though.
Also, a local attacker can place a valid repository configuration file in this directory. This configuration file allows to specify
a plethora of additional configuration options. This makes various additional code paths in libdnf5 accessible to the attacker. |
| CVE-2025-1701 is a high-severity vulnerability in the MIM Admin service. An attacker could exploit this vulnerability by sending a specially crafted request over the RMI interface to execute arbitrary code with the privileges of the MIM Admin service. The RMI interface is only accessible locally (listening on 127.0.0.1), limiting the attack vector to the local machine. This means that in a properly configured hospital environment, an attacker must have already compromised the network and additionally compromised the system where the MIM Admin service is running. From there, attackers with sufficient knowledge of MIM's implementation, library usage, and functionality with access to extend the MIM RMI library could force the MIM Admin service to run commands on the local machine with its privileges.
Users of MIM Software products exposed via RDP or multi-user application virtualization system should take note that the system being exposed is the environment hosting the virtualized MIM client.
This issue affects MIM Admin Service: before 7.2.13, 7.3.8, 7.4.3 |
| Photo module is affected by information leak vulnerability, successful exploitation of this vulnerability may affect service confidentiality. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in MBE Worldwide S.P.A. MBE eShip allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects MBE eShip: from n/a through 2.1.2. |
| The Elementor Addons AI Addons – 70 Widgets, Premium Templates, Ultimate Elements plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 2.2.1 via the render function due to insufficient restrictions on which templates can be included. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract data from private or draft templates that they should not have access to. |
