| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Registrator is a GitHub app that automates creation of registration pull requests for julia packages to the General registry. Prior to version 1.9.5, if the clone URL returned by GitHub is malicious (or can be injected using upstream vulnerabilities) a shell script injection can occur within the `withpasswd` function. Alternatively, an argument injection is possible in the `gettreesha `function. either of these can then lead to a potential RCE. Users should upgrade immediately to v1.9.5 to receive a fix. All prior versions are vulnerable. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/meson: reorder driver deinit sequence to fix use-after-free bug
Unloading the driver triggers the following KASAN warning:
[ +0.006275] =============================================================
[ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0
[ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695
[ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000007] dump_backtrace+0x1ec/0x280
[ +0.000013] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000010] __list_del_entry_valid+0xe0/0x1a0
[ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm]
[ +0.000172] drm_bridge_detach+0x94/0x260 [drm]
[ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm]
[ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm]
[ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm]
[ +0.000144] drm_managed_release+0x170/0x414 [drm]
[ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm]
[ +0.000143] drm_dev_put+0x20/0x30 [drm]
[ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm]
[ +0.000028] take_down_aggregate_device+0xb0/0x160
[ +0.000016] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000015] platform_remove+0x64/0xb0
[ +0.000009] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000009] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000012] __do_sys_delete_module+0x288/0x400
[ +0.000011] __arm64_sys_delete_module+0x5c/0x80
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000018] Allocated by task 0:
[ +0.000007] (stack is not available)
[ +0.000011] Freed by task 2695:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000009] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000011] kfree+0x110/0x35c
[ +0.000008] release_nodes+0xf0/0x16c
[ +0.000009] devres_release_group+0x180/0x270
[ +0.000008] component_unbind+0x128/0x1e0
[ +0.000010] component_unbind_all+0x1b8/0x264
[ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm]
[ +0.000025] take_down_aggregate_device+0xb0/0x160
[ +0.000009] component_del+0x18c/0x360
[ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ +0.000012] platform_remove+0x64/0xb0
[ +0.000008] device_remove+0xb8/0x154
[ +0.000009] device_release_driver_internal+0x398/0x5b0
[ +0.000009] driver_detach+0xac/0x1b0
[ +0.000009] bus_remove_driver+0x158/0x29c
[ +0.000008] driver_unregister+0x70/0xb0
[ +0.000008] platform_driver_unregister+0x20/0x2c
[ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi]
[ +0.000011] __do_sys_delete_module+0x288/0x400
[ +0.000010] __arm64_sys_delete_module+0x5c/0x80
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] The buggy address belongs to the object at ffff000020c39000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
still occur which in turn tries to access dma apis if lpuart_dma_tx_use
flag is true. At this point since dma is torn down, these dma apis can
abort. Set lpuart_dma_tx_use and the corresponding rx flag
lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
accessed after they are relinquished.
Otherwise, when try to kill btattach, kernel may panic. This patch may
fix this issue.
root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 90.189806] Modules linked in: moal(O) mlan(O)
[ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
[ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
[ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
[ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
[ 90.225237] sp : ffff800013f0bac0
[ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
[ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
[ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
[ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
[ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
[ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
[ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
[ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
[ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
[ 90.299876] Call trace:
[ 90.302321] fsl_edma3_disable_request+0x8/0x60
[ 90.306851] lpuart_flush_buffer+0x40/0x160
[ 90.311037] uart_flush_buffer+0x88/0x120
[ 90.315050] tty_driver_flush_buffer+0x20/0x30
[ 90.319496] hci_uart_flush+0x44/0x90
[ 90.323162] +0x34/0x12c
[ 90.327253] tty_ldisc_close+0x38/0x70
[ 90.331005] tty_ldisc_release+0xa8/0x190
[ 90.335018] tty_release_struct+0x24/0x8c
[ 90.339022] tty_release+0x3ec/0x4c0
[ 90.342593] __fput+0x70/0x234
[ 90.345652] ____fput+0x14/0x20
[ 90.348790] task_work_run+0x84/0x17c
[ 90.352455] do_exit+0x310/0x96c
[ 90.355688] do_group_exit+0x3c/0xa0
[ 90.359259] __arm64_sys_exit_group+0x1c/0x20
[ 90.363609] invoke_syscall+0x48/0x114
[ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
[ 90.372068] do_el0_svc+0x2c/0x94
[ 90.375379] el0_svc+0x28/0x80
[ 90.378438] el0t_64_sync_handler+0xa8/0x130
[ 90.382711] el0t_64_sync+0x1a0/0x1a4
[ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
[ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
[ 90.397073] note: btattach[503] exited with preempt_count 1
[ 90.402636] Fixing recursive fault but reboot is needed! |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
When insert and remove the orangefs module, there are memory leaked
as below:
unreferenced object 0xffff88816b0cc000 (size 2048):
comm "insmod", pid 783, jiffies 4294813439 (age 65.512s)
hex dump (first 32 bytes):
6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000031ab7788>] kmalloc_trace+0x27/0xa0
[<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f
[<00000000e5a0085b>] 0xffffffffa02780f9
[<000000004232d9f7>] do_one_initcall+0x87/0x2a0
[<0000000054f22384>] do_init_module+0xdf/0x320
[<000000003263bdea>] load_module+0x2f98/0x3330
[<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0
[<00000000250ae02b>] do_syscall_64+0x35/0x80
[<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Use the golbal variable as the buffer rather than dynamic allocate to
slove the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between quota enable and quota rescan ioctl
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: /proc/pid/smaps_rollup: fix no vma's null-deref
Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value
seq_file") introduced a null-deref if there are no vma's in the task in
show_smaps_rollup. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix a crash in mempool_free
There's a crash in mempool_free when running the lvm test
shell/lvchange-rebuild-raid.sh.
The reason for the crash is this:
* super_written calls atomic_dec_and_test(&mddev->pending_writes) and
wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev)
and bio_put(bio).
* so, the process that waited on sb_wait and that is woken up is racing
with bio_put(bio).
* if the process wins the race, it calls bioset_exit before bio_put(bio)
is executed.
* bio_put(bio) attempts to free a bio into a destroyed bio set - causing
a crash in mempool_free.
We fix this bug by moving bio_put before atomic_dec_and_test.
We also move rdev_dec_pending before atomic_dec_and_test as suggested by
Neil Brown.
The function md_end_flush has a similar bug - we must call bio_put before
we decrement the number of in-progress bios.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 11557f0067 P4D 11557f0067 PUD 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: kdelayd flush_expired_bios [dm_delay]
RIP: 0010:mempool_free+0x47/0x80
Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00
RSP: 0018:ffff88910036bda8 EFLAGS: 00010093
RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8
RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900
R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000
R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05
FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0
Call Trace:
<TASK>
clone_endio+0xf4/0x1c0 [dm_mod]
clone_endio+0xf4/0x1c0 [dm_mod]
__submit_bio+0x76/0x120
submit_bio_noacct_nocheck+0xb6/0x2a0
flush_expired_bios+0x28/0x2f [dm_delay]
process_one_work+0x1b4/0x300
worker_thread+0x45/0x3e0
? rescuer_thread+0x380/0x380
kthread+0xc2/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd]
CR2: 0000000000000000
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Always leave BHs disabled when running ->parallel()
A deadlock can happen when an overloaded system runs ->parallel() in the
context of the current task:
padata_do_parallel
->parallel()
pcrypt_aead_enc/dec
padata_do_serial
spin_lock(&reorder->lock) // BHs still enabled
<interrupt>
...
__do_softirq
...
padata_do_serial
spin_lock(&reorder->lock)
It's a bug for BHs to be on in _do_serial as Steffen points out, so
ensure they're off in the "current task" case like they are in
padata_parallel_worker to avoid this situation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Can't set dst buffer to done when lat decode error
Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
Smatch report warning as follows:
drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn:
'&entry->list' not removed from list
In tsi148_dma_list_add(), the error path "goto err_dma" will not
remove entry->list from list->entries, but entry will be freed,
then list traversal may cause UAF.
Fix by removeing it from list->entries before free(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix an Oops in nfs_d_automount()
When mounting from a NFSv4 referral, path->dentry can end up being a
negative dentry, so derive the struct nfs_server from the dentry
itself instead. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix user-after-free
This uses l2cap_chan_hold_unless_zero() after calling
__l2cap_get_chan_blah() to prevent the following trace:
Bluetooth: l2cap_core.c:static void l2cap_chan_destroy(struct kref
*kref)
Bluetooth: chan 0000000023c4974d
Bluetooth: parent 00000000ae861c08
==================================================================
BUG: KASAN: use-after-free in __mutex_waiter_is_first
kernel/locking/mutex.c:191 [inline]
BUG: KASAN: use-after-free in __mutex_lock_common
kernel/locking/mutex.c:671 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0x278/0x400
kernel/locking/mutex.c:729
Read of size 8 at addr ffff888006a49b08 by task kworker/u3:2/389 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix the issue of CMDQ memory leaks
When hinic_set_cmdq_depth() fails in hinic_init_cmdqs(), the cmdq memory is
not released correctly. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix multipath crash caused by flush request when blktrace is enabled
The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:
[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294] <TASK>
[ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830] tcp_read_sock+0x9c/0x260
[ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834] process_one_work+0x1e8/0x390
[ 2517.954473] worker_thread+0x53/0x3c0
[ 2517.958069] ? process_one_work+0x390/0x390
[ 2517.961655] kthread+0x10c/0x130
[ 2517.965211] ? set_kthread_struct+0x40/0x40
[ 2517.968760] ret_from_fork+0x1f/0x30
[ 2517.972285] </TASK>
To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: kmem: fix a NULL pointer dereference in obj_stock_flush_required()
KCSAN found an issue in obj_stock_flush_required():
stock->cached_objcg can be reset between the check and dereference:
==================================================================
BUG: KCSAN: data-race in drain_all_stock / drain_obj_stock
write to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0:
drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306
refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340
obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408
memcg_slab_free_hook mm/slab.h:587 [inline]
__cache_free mm/slab.c:3373 [inline]
__do_kmem_cache_free mm/slab.c:3577 [inline]
kmem_cache_free+0x105/0x280 mm/slab.c:3602
__d_free fs/dcache.c:298 [inline]
dentry_free fs/dcache.c:375 [inline]
__dentry_kill+0x422/0x4a0 fs/dcache.c:621
dentry_kill+0x8d/0x1e0
dput+0x118/0x1f0 fs/dcache.c:913
__fput+0x3bf/0x570 fs/file_table.c:329
____fput+0x15/0x20 fs/file_table.c:349
task_work_run+0x123/0x160 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171
exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296
do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1:
obj_stock_flush_required mm/memcontrol.c:3319 [inline]
drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361
try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703
try_charge mm/memcontrol.c:2837 [inline]
mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290
sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025
sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525
udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668
__sys_setsockopt+0x1c3/0x230 net/socket.c:2271
__do_sys_setsockopt net/socket.c:2282 [inline]
__se_sys_setsockopt net/socket.c:2279 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffff8881382d52c0 -> 0xffff888138893740
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to
stock->cached_objcg. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5
According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.
When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.
=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
dump_backtrace+0xe0/0x130
show_stack+0x20/0x60
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
ubsan_epilogue+0x10/0x50
__ubsan_handle_out_of_bounds+0x80/0x90
acpi_ds_exec_end_op+0x1bc/0x6d8
acpi_ps_parse_loop+0x57c/0x618
acpi_ps_parse_aml+0x1e0/0x4b4
acpi_ps_execute_method+0x24c/0x2b8
acpi_ns_evaluate+0x3a8/0x4bc
acpi_evaluate_object+0x15c/0x37c
acpi_evaluate_integer+0x54/0x15c
show_power+0x8c/0x12c [acpi_power_meter] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Use number of bits to manage bitmap sizes
To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using
byte as unit. However, bitmap helper functions assume that bitmaps are
allocated using unsigned long as unit. This gap causes memory access beyond
the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG
was observed at firmware download to eHBA-9600. Call trace indicated that
the out-of-bounds access happened in find_first_zero_bit() called from
mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap.
To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use
number of bits, and call bitmap helper functions which take number of bits
as arguments. For memory allocation, call bitmap_zalloc() instead of
kzalloc() and krealloc(). For memory free, call bitmap_free() instead of
kfree(). For zero clear, call bitmap_clear() instead of memset().
Remove three fields for bitmap byte sizes in struct scmd_priv which are no
longer required. Replace the field dev_handle_bitmap_sz with
dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across
resize. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix Oops by 9.1 surround channel names
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
If share is , share->path is NULL and it cause NULL pointer
dereference issue. |
