| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zendesk before 2024-07-02 allows remote attackers to read ticket history via e-mail spoofing, because Cc fields are extracted from incoming e-mail messages and used to grant additional authorization for ticket viewing, the mechanism for detecting spoofed e-mail messages is insufficient, and the support e-mail addresses associated with individual tickets are predictable. |
| A vulnerability has been identified in SCALANCE W1748-1 M12 (6GK5748-1GY01-0AA0), SCALANCE W1748-1 M12 (6GK5748-1GY01-0TA0), SCALANCE W1788-1 M12 (6GK5788-1GY01-0AA0), SCALANCE W1788-2 EEC M12 (6GK5788-2GY01-0TA0), SCALANCE W1788-2 M12 (6GK5788-2GY01-0AA0), SCALANCE W1788-2IA M12 (6GK5788-2HY01-0AA0), SCALANCE W721-1 RJ45 (6GK5721-1FC00-0AA0), SCALANCE W721-1 RJ45 (6GK5721-1FC00-0AB0), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AA0), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AB0), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AC0), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AA0), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AA6), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AB0), SCALANCE W734-1 RJ45 (USA) (6GK5734-1FX00-0AB6), SCALANCE W738-1 M12 (6GK5738-1GY00-0AA0), SCALANCE W738-1 M12 (6GK5738-1GY00-0AB0), SCALANCE W748-1 M12 (6GK5748-1GD00-0AA0), SCALANCE W748-1 M12 (6GK5748-1GD00-0AB0), SCALANCE W748-1 RJ45 (6GK5748-1FC00-0AA0), SCALANCE W748-1 RJ45 (6GK5748-1FC00-0AB0), SCALANCE W761-1 RJ45 (6GK5761-1FC00-0AA0), SCALANCE W761-1 RJ45 (6GK5761-1FC00-0AB0), SCALANCE W774-1 M12 EEC (6GK5774-1FY00-0TA0), SCALANCE W774-1 M12 EEC (6GK5774-1FY00-0TB0), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AA0), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AA6), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AB0), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AC0), SCALANCE W774-1 RJ45 (USA) (6GK5774-1FX00-0AB6), SCALANCE W778-1 M12 (6GK5778-1GY00-0AA0), SCALANCE W778-1 M12 (6GK5778-1GY00-0AB0), SCALANCE W778-1 M12 EEC (6GK5778-1GY00-0TA0), SCALANCE W778-1 M12 EEC (USA) (6GK5778-1GY00-0TB0), SCALANCE W786-1 RJ45 (6GK5786-1FC00-0AA0), SCALANCE W786-1 RJ45 (6GK5786-1FC00-0AB0), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AA0), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AB0), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AC0), SCALANCE W786-2 SFP (6GK5786-2FE00-0AA0), SCALANCE W786-2 SFP (6GK5786-2FE00-0AB0), SCALANCE W786-2IA RJ45 (6GK5786-2HC00-0AA0), SCALANCE W786-2IA RJ45 (6GK5786-2HC00-0AB0), SCALANCE W788-1 M12 (6GK5788-1GD00-0AA0), SCALANCE W788-1 M12 (6GK5788-1GD00-0AB0), SCALANCE W788-1 RJ45 (6GK5788-1FC00-0AA0), SCALANCE W788-1 RJ45 (6GK5788-1FC00-0AB0), SCALANCE W788-2 M12 (6GK5788-2GD00-0AA0), SCALANCE W788-2 M12 (6GK5788-2GD00-0AB0), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TA0), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TB0), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TC0), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AA0), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AB0), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AC0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0), SCALANCE WAM766-1 (EU) (6GK5766-1GE00-7DA0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0), SCALANCE WAM766-1 EEC (EU) (6GK5766-1GE00-7TA0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0), SCALANCE WUM766-1 (EU) (6GK5766-1GE00-3DA0), SCALANCE WUM766-1 (US) (6GK5766-1GE00-3DB0). This CVE refers to Scenario 3 "Override client’s security context" of CVE-2022-47522.
Affected devices can be tricked into associating a newly negotiated, attacker-controlled, security context with frames belonging to a victim. This could allow a physically proximate attacker to decrypt frames meant for the victim. |
| A vulnerability has been identified in SCALANCE W721-1 RJ45 (6GK5721-1FC00-0AA0) (All versions), SCALANCE W721-1 RJ45 (6GK5721-1FC00-0AB0) (All versions), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AA0) (All versions), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AB0) (All versions), SCALANCE W722-1 RJ45 (6GK5722-1FC00-0AC0) (All versions), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AA0) (All versions), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AA6) (All versions), SCALANCE W734-1 RJ45 (6GK5734-1FX00-0AB0) (All versions), SCALANCE W734-1 RJ45 (USA) (6GK5734-1FX00-0AB6) (All versions), SCALANCE W738-1 M12 (6GK5738-1GY00-0AA0) (All versions), SCALANCE W738-1 M12 (6GK5738-1GY00-0AB0) (All versions), SCALANCE W748-1 M12 (6GK5748-1GD00-0AA0) (All versions), SCALANCE W748-1 M12 (6GK5748-1GD00-0AB0) (All versions), SCALANCE W748-1 RJ45 (6GK5748-1FC00-0AA0) (All versions), SCALANCE W748-1 RJ45 (6GK5748-1FC00-0AB0) (All versions), SCALANCE W761-1 RJ45 (6GK5761-1FC00-0AA0) (All versions), SCALANCE W761-1 RJ45 (6GK5761-1FC00-0AB0) (All versions), SCALANCE W774-1 M12 EEC (6GK5774-1FY00-0TA0) (All versions), SCALANCE W774-1 M12 EEC (6GK5774-1FY00-0TB0) (All versions), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AA0) (All versions), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AA6) (All versions), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AB0) (All versions), SCALANCE W774-1 RJ45 (6GK5774-1FX00-0AC0) (All versions), SCALANCE W774-1 RJ45 (USA) (6GK5774-1FX00-0AB6) (All versions), SCALANCE W778-1 M12 (6GK5778-1GY00-0AA0) (All versions), SCALANCE W778-1 M12 (6GK5778-1GY00-0AB0) (All versions), SCALANCE W778-1 M12 EEC (6GK5778-1GY00-0TA0) (All versions), SCALANCE W778-1 M12 EEC (USA) (6GK5778-1GY00-0TB0) (All versions), SCALANCE W786-1 RJ45 (6GK5786-1FC00-0AA0) (All versions), SCALANCE W786-1 RJ45 (6GK5786-1FC00-0AB0) (All versions), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AA0) (All versions), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AB0) (All versions), SCALANCE W786-2 RJ45 (6GK5786-2FC00-0AC0) (All versions), SCALANCE W786-2 SFP (6GK5786-2FE00-0AA0) (All versions), SCALANCE W786-2 SFP (6GK5786-2FE00-0AB0) (All versions), SCALANCE W786-2IA RJ45 (6GK5786-2HC00-0AA0) (All versions), SCALANCE W786-2IA RJ45 (6GK5786-2HC00-0AB0) (All versions), SCALANCE W788-1 M12 (6GK5788-1GD00-0AA0) (All versions), SCALANCE W788-1 M12 (6GK5788-1GD00-0AB0) (All versions), SCALANCE W788-1 RJ45 (6GK5788-1FC00-0AA0) (All versions), SCALANCE W788-1 RJ45 (6GK5788-1FC00-0AB0) (All versions), SCALANCE W788-2 M12 (6GK5788-2GD00-0AA0) (All versions), SCALANCE W788-2 M12 (6GK5788-2GD00-0AB0) (All versions), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TA0) (All versions), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TB0) (All versions), SCALANCE W788-2 M12 EEC (6GK5788-2GD00-0TC0) (All versions), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AA0) (All versions), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AB0) (All versions), SCALANCE W788-2 RJ45 (6GK5788-2FC00-0AC0) (All versions). This CVE refers to Scenario 1 "Leak frames from the Wi-Fi queue" of CVE-2022-47522.
Affected devices queue frames in order to subsequently change the security context and leak the queued frames. This could allow a physically proximate attacker to intercept (possibly cleartext) target-destined frames. |
| On affected platforms running Arista EOS, maliciously formed UDP packets with source port 3503 may be accepted by EOS. UDP Port 3503 is associated with LspPing Echo Reply. This can result in unexpected behaviors, especially for UDP based services that do not perform some form of authentication. |
| Opera Mini for Android before version 52.2 is vulnerable to an address bar spoofing attack. The vulnerability allows a malicious page to trick the browser into showing an address of a different page. This may allow the malicious page to impersonate another page and trick a user into providing sensitive data. |
| Authentication Bypass by Spoofing vulnerability in 10up Restricted Site Access allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Restricted Site Access: from n/a through 7.4.1. |
| An issue was discovered in AlertEnterprise Guardian 4.1.14.2.2.1. One can bypass manager approval by changing the user ID in a Request%20Building%20Access requestSubmit API call. The vendor has stated that the system is protected by updating to a version equal to or greater than one of the following build numbers: 4.1.12.2.1.19, 4.1.12.5.2.36, 4.1.13.0.60, 4.1.13.2.0.3.39, 4.1.13.2.0.3.41, 4.1.13.2.42, 4.1.13.2.25.44, 4.1.14.0.13, 4.1.14.0.43, 4.1.14.0.48, and 4.1.14.1.5.32. |
| A Secure Boot Bypass Vulnerability exists in affected Access Points that allows an adversary to bypass the hardware root of trust verification in place to ensure only vendor-signed firmware can execute on the device. An adversary can exploit this vulnerability to run modified or custom firmware on affected Access Points. |
| Akka.NET is a .NET port of the Akka project from the Scala / Java community. In all versions of Akka.Remote from v1.2.0 to v1.5.51, TLS could be enabled via our `akka.remote.dot-netty.tcp` transport and this would correctly enforce private key validation on the server-side of inbound connections. Akka.Remote, however, never asked the outbound-connecting client to present ITS certificate - therefore it's possible for untrusted parties to connect to a private key'd Akka.NET cluster and begin communicating with it without any certificate. The issue here is that for certificate-based authentication to work properly, ensuring that all members of the Akka.Remote network are secured with the same private key, Akka.Remote needed to implement mutual TLS. This was not the case before Akka.NET v1.5.52. Those who run Akka.NET inside a private network that they fully control or who were never using TLS in the first place are now affected by the bug. However, those who use TLS to secure their networks must upgrade to Akka.NET V1.5.52 or later. One patch forces "fail fast" semantics if TLS is enabled but the private key is missing or invalid. Previous versions would only check that once connection attempts occurred. The second patch, a critical fix, enforces mutual TLS (mTLS) by default, so both parties must be keyed using the same certificate. As a workaround, avoid exposing the application publicly to avoid the vulnerability having a practical impact on one's application. However, upgrading to version 1.5.52 is still recommended by the maintainers. |
| Openfire is an XMPP server licensed under the Open Source Apache License. Openfire’s SASL EXTERNAL mechanism for client TLS authentication contains a vulnerability in how it extracts user identities from X.509 certificates. Instead of parsing the structured ASN.1 data, the code calls X509Certificate.getSubjectDN().getName() and applies a regex to look for CN=. This method produces a provider-dependent string that does not escape special characters. In SunJSSE (sun.security.x509.X500Name), for example, commas and equals signs inside attribute values are not escaped. As a result, a malicious certificate can embed CN= inside another attribute value (e.g. OU="CN=admin,"). The regex will incorrectly interpret this as a legitimate Common Name and extract admin. If SASL EXTERNAL is enabled and configured to map CNs to user accounts, this allows the attacker to impersonate another user. The fix is included in Openfire 5.0.2 and 5.1.0. |
| The application or its infrastructure allows for IP address spoofing by providing its own value in the "X-Forwarded-For" header. Thus, the action logging mechanism in the application loses accountability
This issue affects CyberArk Endpoint Privilege Manager in SaaS version 24.7.1. The status of other versions is unknown. After multiple attempts to contact the vendor we did not receive any answer. |
| Entrust Instant Financial Issuance (On Premise) Software (formerly known as Cardwizard) 6.10.0, 6.9.0, 6.9.1, 6.9.2, and 6.8.x and earlier leaves behind a configuration file (i.e. WebAPI.cfg.xml) after the installation process. This file can be accessed without authentication on HTTP port 80 by guessing the correct IIS webroot path. It includes system configuration parameter names and values with sensitive configuration values encrypted. |
| Wi-SUN unexpected 4- Way Handshake packet receptions may lead to predictable keys and potentially leading to Man in the middle (MitM) attack |
| QUIC in HAProxy 3.1.x before 3.1-dev7, 3.0.x before 3.0.5, and 2.9.x before 2.9.11 allows opening a 0-RTT session with a spoofed IP address. This can bypass the IP allow/block list functionality. |
| Authentication Bypass by Spoofing vulnerability in LionScripts IP Blocker Lite allows Functionality Bypass.This issue affects IP Blocker Lite: from n/a through 11.1.1. |
| Authentication Bypass by Spoofing vulnerability in pluginkollektiv Antispam Bee allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Antispam Bee: from n/a through 2.11.3. |
| The Online-Ausweis-Funktion eID scheme in the German National Identity card through 2024-02-15 allows authentication bypass by spoofing. A man-in-the-middle attacker can assume a victim's identify for access to government, medical, and financial resources, and can also extract personal data from the card, aka the "sPACE (Spoofing Password Authenticated Connection Establishment)" issue. This occurs because of a combination of factors, such as insecure PIN entry (for basic readers) and eid:// deeplinking. The victim must be using a modified eID kernel, which may occur if the victim is tricked into installing a fake version of an official app. NOTE: the BSI position is "ensuring a secure operational environment at the client side is an obligation of the ID card owner." |
| Authentication Bypass by Spoofing vulnerability in Pippin Williamson CGC Maintenance Mode allows Functionality Bypass.This issue affects CGC Maintenance Mode: from n/a through 1.2. |
| A security vulnerability was identified in Obsidian Scheduler's REST API 5.0.0 thru 6.3.0. If an account is locked out due to not enrolling in MFA (e.g. after the 7-day enforcement window), the REST API still allows the use of Basic Authentication to authenticate and perform administrative actions. In particular, the default admin account was found to be locked out via the web interface but still usable through the REST API. This allowed creation of a new privileged user, bypassing MFA protections. This undermines the intended security posture of MFA enforcement. |
| DESIGNA ABACUS v.18 and before allows an attacker to bypass the payment process via a crafted QR code. |
