| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated Cross Site Scripting (XSS) in JetFormBuilder <= 3.6.5.1 versions. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Easy Appointments allows DOM-Based XSS.
This issue affects Easy Appointments: from n/a through 4.0.2.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in Automattic WooCommerce allows HTTP DoS.
This issue affects WooCommerce: from n/a before 11.1.0. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix len check in receive_big()
receive_big() bounds the device-announced length by
(big_packets_num_skbfrags + 1) * PAGE_SIZE. That is still too loose:
add_recvbuf_big() sets sg[1] to start at offset
sizeof(struct padded_vnet_hdr) into the first page, so the chain
actually carries hdr_len + (PAGE_SIZE - sizeof(padded_vnet_hdr)) +
big_packets_num_skbfrags * PAGE_SIZE bytes -- 20 bytes less than the
check allows for the common hdr_len == 12 case.
A malicious virtio backend can announce a len in that gap. page_to_skb()
then walks one frag past the page chain, storing a NULL page->private
into skb_shinfo()->frags[MAX_SKB_FRAGS], which is both an out-of-bounds
write past the static frag array and a NULL frag handed up the rx path.
Bound len by the size add_recvbuf_big() actually advertised. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix missing expect put in obj eval
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
nf_tables: nft_dynset: fix possible stateful expression memleak in error path
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330 |
| A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V2.1 HF0 with SINEMA Remote Connect Edge Client installed). Affected devices do not properly sanitize configuration parameters.
This could allow a non-privileged local attacker to execute root commands on the device. |
| Allocation of Resources Without Limits or Throttling vulnerability in Erlang/OTP inets httpd allows an unauthenticated remote attacker to cause denial of service by opening and holding open a large number of connections. The max_clients option is documented to default to 150, and the inets hardening guide presents that limit as the first layer of denial-of-service defence, but a server that does not set it explicitly accepts an unlimited number of simultaneous connections. Establishing the connections is sufficient; no valid request and no authentication are required.
The accept gate in httpd_manager:handle_new_connection/4 reads the option with httpd_util:lookup/2, which returns undefined when the key is absent, rather than the three-argument form carrying the 150 default that the neighbouring get_ustate/2 uses. Erlang term ordering places every integer before every atom, so the Count =< Max guard holds for any connection count and the server never returns {reject, busy}. Each accepted connection occupies a worker process and a socket for as long as it is held, driving the node towards process, memory and file descriptor exhaustion. Servers that set max_clients explicitly are unaffected, because a configured value is applied as intended.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| Tobit Laboratories AG TeamDavid's Webbox application contains a reflected cross-site scripting (XSS)
vulnerability. By sending a specially crafted link including an
arbitrary path, an XSS payload or the parameter “EntryInfo”, and the
parameter “!templateName=entryMail”, an attacker can cause the payload
to execute in the victim’s browser when they click the link. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application implements an API endpoint that is vulnerable to a
buffer overflow condition. By submitting a specially crafted JSON body,
such as one that is at least 8 characters long and begins with a number,
an unauthenticated attacker can cause the server to crash, resulting in
denial of service. Depending on the stack state or if a stack canary
can be disclosed through another vulnerability, this buffer overflow
could potentially lead to remote code execution and full compromise of
the server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application’s endpoint “//serverClient_close.html” is vulnerable to a
buffer overflow vulnerability in multiple form data parameters. By
submitting excessively long values in these parameters, an authenticated
attacker can trigger a server crash, resulting in denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application implements various file upload functionalities that are
vulnerable to a buffer overflow condition. By specifying an excessively
long filename in a file upload request, an unauthenticated attacker can
trigger a crash of the server, resulting in a denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox is vulnerable to a local file inclusion vulnerability in
the send email, fax, SMS, etc. functionality. By specifying an '@@attach' command in the form field 'scjob', files can be attached to a message,
which can then be downloaded by an authenticated user. A filter is in
place that restricts access to the David con-fig folder and the user
folder. However, this filter can be bypassed by specifying an alternate
data stream, allowing the download of sensitive files such as other
users' access files containing their passwords or the server's private
key. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
