| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stored XSS via markdown HTML processing in Apache Allura.
This issue affects Apache Allura: from through 1.20.0.
Users are recommended to upgrade to version 1.21.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix uncancelled rxrpc OOB message handler
Fix AFS to cancel its OOB message processing (typically to respond to
security challenges). Also move OOB message processing to afs_wq so that
it's also waited for and make the OOB handler just return if the net
namespace is no longer live. |
| Apache Allura: stored XSS via SVN code repositories. Git repositories are not known to be affected. The vulnerability is likely mitigated via default CSP headers.
This issue affects Apache Allura: through 1.20.0.
Users are recommended to upgrade to version 1.21.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: bound SGL data length before allocating command buffers
nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length
and, for the in-capsule offset descriptor (type 0x01), checks it
against port->inline_data_size before use. Any other SGL descriptor
type -- including the non-inline transport SGL data-block descriptor
(type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A,
the type a real host uses for out-of-capsule writes) skips that check
entirely and falls straight through to:
cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt);
with len taken directly from the wire, unbounded up to 4 GiB.
nvmet_req_init() only parses the command and never inspects
sgl->length, and nvmet_check_transfer_len() -- the only other place
transfer_len is validated -- runs later, from req->execute(), after
the allocation has already happened. For a write command the target
responds with an R2T and parks the command waiting for the host to
send the data; if the host (or an unauthenticated peer that simply
never follows up) never does, the sgl_alloc() buffer stays resident
for the life of the command. NVMe/TCP has no mandatory authentication
in the default configuration, so any peer able to reach the target
portal and complete a Fabrics connect can drive this with a single
crafted command, repeatable across queues and connections for
amplification. This is unbounded kernel memory allocation
triggered by a remote, effectively unauthenticated peer.
Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file
already uses to bound per-PDU H2C data, for every SGL descriptor type,
before doing any allocation. This closes the gap for the non-inline
descriptor while leaving the existing, tighter inline_data_size check
in place for the in-capsule case.
Runtime-verified on a v6.19 KASAN stand: with this bound in place, a
crafted write command carrying an oversized non-inline SGL length is
rejected before sgl_alloc() runs, where the same request previously
drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that
stayed resident pending an R2T the host never satisfies. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Write ESR_EL2 for injected nested SError exceptions
kvm_inject_el2_exception() writes ESR_EL2 for synchronous exceptions
but not for SError. enter_exception64() does not write ESR_ELx for any
exception type, so the constructed syndrome is dropped. A guest L2
hypervisor taking a nested SError observes stale ESR_EL2.
This affects both kvm_inject_nested_serror() and the EASE path in
kvm_inject_nested_sea().
Write ESR_EL2 for except_type_serror, matching except_type_sync. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
A circular locking dependency involves INODE_ALLOC_SYSTEM_INODE,
EXTENT_ALLOC_SYSTEM_INODE, and ORPHAN_DIR_SYSTEM_INODE.
1. ocfs2_mknod() acquires INODE_ALLOC then EXTENT_ALLOC.
2. ocfs2_dio_end_io_write() acquires EXTENT_ALLOC for unwritten
extents, then ORPHAN_DIR via ocfs2_del_inode_from_orphan() while still
holding EXTENT_ALLOC.
3. ocfs2_wipe_inode() acquires ORPHAN_DIR then INODE_ALLOC via
ocfs2_remove_inode.
Break the cycle in ocfs2_dio_end_io_write() by freeing the allocation
contexts (releasing EXTENT_ALLOC) before acquiring ORPHAN_DIR.
WARNING: possible circular locking dependency detected
------------------------------------------------------
is trying to acquire lock:
ffff8881e78b33a0
(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}, at:
ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299
but task is already holding lock:
ffff8881e78b4fa0
(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}, at:
ocfs2_evict_inode+0xe97/0x43b0 fs/ocfs2/inode.c:1299
the existing dependency chain (in reverse order) is:
-> #2 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}:
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_del_inode_from_orphan+0x12e/0x7a0 fs/ocfs2/namei.c:2728
ocfs2_dio_end_io+0xf9c/0x1370 fs/ocfs2/aops.c:2418
dio_complete+0x25b/0x790 fs/direct-io.c:281
-> #1 (&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}:
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_reserve_suballoc_bits+0x16d/0x4840 fs/ocfs2/suballoc.c:882
ocfs2_reserve_new_metadata_blocks+0x415/0x9a0
fs/ocfs2/suballoc.c:1078
ocfs2_mknod+0x10f3/0x2260 fs/ocfs2/namei.c:351
-> #0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}:
__lock_acquire+0x15a5/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5868
down_write+0x96/0x200 kernel/locking/rwsem.c:1625
inode_lock include/linux/fs.h:1029 [inline]
ocfs2_remove_inode fs/ocfs2/inode.c:733 [inline]
ocfs2_wipe_inode fs/ocfs2/inode.c:896 [inline]
ocfs2_delete_inode fs/ocfs2/inode.c:1157 [inline]
ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299
Chain exists of:
&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE] -->
&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE] -->
&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]);
lock(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix buffer head management in ocfs2_read_blocks()
In ocfs2_read_blocks(), caller should't assume that buffer head returned
by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops
b_count from 1 to 0. If it is not so, buffer head remains on hold and
likely to be returned by the next call to 'sb_getblk()' unchanged - that
is, with BH_Uptodate bit set even if it has failed validation previously,
thus allowing to insert that buffer head into OCFS2 metadata cache and
submit it to upper layers. To avoid such a scenario, BH_Uptodate should
be cleared immediately after 'validate()' callback has detected some data
inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: use check_add_overflow for shader size+offset bound
vmw_shader_define() validates the user-supplied shader window against
its backing buffer with
(u64)buffer->tbo.base.size < (u64)size + (u64)offset
drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is
near U64_MAX the unsigned addition wraps and the resulting tiny value
passes the check. The unbounded offset is then stored in
res->guest_memory_offset and forwarded to host SVGA shader-create
commands.
Use check_add_overflow() to detect the wrap and compare the resulting
endpoint against the buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xilinx-trng - Remove crypto_rng interface
Implementing the crypto_rng interface has no purpose, as it isn't used
in practice. It's being removed from other drivers too. Just remove
it. This leaves hwrng, which is actually used.
Tagging with 'Cc stable' due to the bugs that this removes:
- xtrng_trng_generate() sometimes returned success even when it didn't
fill in all the bytes.
- It was possible for xtrng_trng_generate() and
xtrng_hwrng_trng_read() to run concurrently and interfere with each
other, as the locking code in xtrng_hwrng_trng_read() was broken. |
| An issue was discovered in Lantronix EDS3000PS 3.1.0.0R2. The host parameter of the TFTP client in the Filesystem Browser page is not properly sanitized. This can be exploited to escape from the original command and execute an arbitrary one with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| The administrator password can be changed without knowledge of the current password. When chained with an authentication bypass vulnerability, this issue may allow unauthenticated attackers to modify the administrator password. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: release readahead folios on iterator preparation failure
netfs_prepare_read_iterator() batches readahead folios in put_batch so that
the folio references can be dropped after the I/O iterator has been
prepared.
If rolling_buffer_load_from_ra() fails after earlier folios have been
batched, the function returns immediately and leaves those references held.
Release the batch before returning the error. |
| An issue was discovered in Lantronix EDS5000 2.1.0.0R3. An authenticated attacker can inject OS commands into the "tunnel" parameter when killing a tunnel connection. Injected commands are executed with root privileges. |
| An issue was discovered in Lantronix EDS5000 2.1.0.0R3. An authenticated attacker can inject OS commands into the "name" parameter when deleting SSL credentials through the management interface. Injected commands are executed with root privileges. |
| An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The Log Info page allows users to see log files by specifying their names. Due to a missing sanitization in the file name parameter, an authenticated attacker can inject arbitrary OS commands that are executed with root privileges. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a remote HTTP server to exhaust memory on the client host and cause a denial of service.
Two HTTP/1 response-parser states accumulate server data without any cap. In lib/mint/http1.ex, decode_status_line/4 stores the unconsumed data in conn.buffer when the status line is incomplete, and decode_body/5 does the same for an unterminated chunk-extension line. Both wait for a CRLF the server never has to send, and conn.buffer is prepended to every subsequent socket message. The :max_header_list_size budget is wired only into decode_headers/5 and decode_trailer_headers/4, so neither of these states is covered by it. A malicious server, or one reached through an attacker-controlled redirect or a fetched URL, streams bytes indefinitely until the BEAM node is killed by the operating system out-of-memory handler. The chunk-extension variant is reached after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 0.1.0 before 1.10.0. |
| Use of a One-Way hash without a salt vulnerability in Pik Online Software Solutions Inc. Pik Online Portal allows Cryptanalysis.
This issue affects Pik Online Portal: through 3.5.1. |
