| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: realtek_cr: fix use-after-free on disconnect
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped
Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force
vCPUs to reload/recheck their guest-provided VMSA if the backing gmem
page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core
logic to handle invalidations as VMX does for the APIC-access page, as the
two concepts are nearly identical: shove the physical address of a page
into the vCPU's control structure:
1. Snapshot the invalidation sequence counter
2. Grab the pfn (from guest_memfd in this case)
3. Acquire mmu_lock for read
4. Re-request reload if retry is needed, otherwise commit the change.
Note, the re-request action in #4 is necessary as KVM's retry logic is
fuzzy, i.e. can get false positives. If the guest_memfd page has been
dropped, at some point a subsequent reload will fail to get a PFN from
guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false
positive, KVM will retry until there are no relevant MMU notifier events
(and will retry in the "outer" loop, i.e. will drop locks and resched as
needed).
Note #2! Take care to invalidate the VMSA when a relevant memslot is
DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated
on memslot bindings (KVM doesn't know what GFN range(s) to invalidate
without a binding). And more importantly, the VMSA mapping requires a
memslot, i.e. must be invalidated if its memslots disappears, regardless of
the state of the underlying guest_memfd inode.
Failure to invalidate the vCPU's control.vmsa_pa (which is checked by
pre_sev_run()) can prevent KVM from properly freeing the page as firmware
will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU
is actively running, i.e. if VMSA page is in-use. That in turn leads to an
RMP #PF on the next use, as the page will still be assigned to the SNP VM.
SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3
SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f]
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
rmpupdate+0x12c/0x140
rmp_make_shared+0x3b/0x60
sev_gmem_invalidate+0xe0/0x170 [kvm_amd]
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
------------[ cut here ]------------
SEV: Failed to update RMP entry for PFN 0x78d198 error -14
WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd]
Call Trace:
<TASK>
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
irq event stamp: 20689
hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60
hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60
softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: ffff99
---truncated--- |
| The Photo Gallery by 10Web – Mobile-Friendly Image Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Shortcode Attributes in all versions up to, and including, 1.8.44 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| vm2 through 3.11.6 does not normalize `node:`-prefixed builtin specifiers when evaluating user-supplied negative (deny) entries in a NodeVM wildcard require policy. Although NodeVM strips the `node:` prefix during require() resolution, negative wildcard entries are matched by exact string comparison against the canonical builtin names, so a policy such as `new NodeVM({ require: { builtin: ['*', '-node:child_process'] } })` fails to deny the canonical `child_process` module. Sandboxed code can therefore obtain the host `child_process` builtin via `require('child_process')` or `require('node:child_process')`, gaining references to process-spawning APIs such as execSync and spawn, which is equivalent to host command-execution capability for untrusted sandbox code. Fixed in vm2 3.11.7. (Suggested title: "vm2 before 3.11.7: NodeVM builtin deny-list bypass via node:-prefixed specifiers exposes child_process") |
| A flaw was found in Picketlink's SP signature validation; a SAML response containing zero assertion elements matching the signature check can allow an attacker to forge a SAML response and auth as any principal with any roles on the protected application. |
| A flaw was found in Picketlink Federation SAML; the unsolcited response handler would accept forged assertions with no verification or validation, permitting an unauthed attacker to authenticate as any principal in any role. This could lead to information disclosure, access to restricted operations, or other flaws. |
| Vulnerability in the Oracle Applications Framework product of Oracle E-Business Suite (component: Personalization). Supported versions that are affected are 12.2.9-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Applications Framework. Successful attacks of this vulnerability can result in takeover of Oracle Applications Framework. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics (component: Analytics Server). Supported versions that are affected are 8.2.0.0.0 and 26.01.0.0.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Business Intelligence Enterprise Edition executes to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this vulnerability can result in takeover of Oracle Business Intelligence Enterprise Edition. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Product Hub product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Product Hub. Successful attacks of this vulnerability can result in takeover of Oracle Product Hub. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Product Hub product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Hub. Successful attacks of this vulnerability can result in takeover of Oracle Product Hub. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Banking Origination product of Oracle Financial Services Applications (component: Onboarding Batch Processes). Supported versions that are affected are 14.5.0.0.0-14.9.0.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Banking Origination. Successful attacks of this vulnerability can result in takeover of Oracle Banking Origination. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, for views that opt into state snapshots, the snapshot `state_json` embedded in the client page was restored on reconnect as trusted view state with no integrity check. A client could edit the unsigned `state_json` in their page and return it in the reconnect mount frame to inject arbitrary view attributes — e.g. flip `is_admin` to `True`, or change `account_id` / `balance` — escalating privilege or tampering with business state held in public view attributes (the normal djust pattern). This issue is fixed in djust 1.0.7. State snapshots are signed; unsigned or forged snapshots are rejected on the back-navigation restore path. As a workaround, do not enable state snapshots; do not hold authorization/ownership state in public view attributes. |
| Incorrect Implementation of Authentication Algorithm Vulnerability in Mitsubishi Electric GX Works3 and Motion Control Setting allows a local attacker to successfully authenticate even with an invalid block password by executing the affected product and modifying part of the executable module in memory, and thereby may be able to view, tamper with, destroy, or delete control programs. |
| Contributor SQL Injection in Product Feed Manager <= 7.12.0 versions. |
| SGLang through 0.5.19 in prefill/decode disaggregation mode contains an unauthenticated PUT /route endpoint on the prefill bootstrap service that allows attackers to poison the KV transfer routing table. Attackers can supply arbitrary rank_ip and rank_port values to redirect decode workers to attacker-controlled endpoints, causing denial of service or disclosure of KV transfer metadata including session identifiers and tensor-parallel topology parameters. |
| vm2 is a sandbox for running untrusted Node.js code. In versions >= 3.11.4 and <= 3.11.6, the NodeVM constructor computes `hasRealRequireConfig` with `typeof requireOpts === 'object' && requireOpts !== null`, so an array-shaped `require` value (for example `require: []`) satisfies the guard that is meant to reject nesting without an explicit require configuration. `makeResolverFromLegacyOptions()` then destructures the array into undefined option fields and returns a resolver containing only `NESTING_OVERRIDE.vm2`. As a result, an attacker who can supply JavaScript executed by a NodeVM configured with truthy `nesting` and an array-shaped `require` (e.g. `new NodeVM({nesting: true, require: []})`) can require the host `vm2` module, create an inner NodeVM with an attacker-chosen builtin allowlist (such as `child_process`), and execute arbitrary commands with the privileges of the host Node.js process, escaping the sandbox. Outer builtin restrictions do not constrain the attacker-created inner NodeVM. This issue is fixed in vm2 3.11.7. |
| An issue in Howyar Technologies Inc SysReturn Versions prior to 11.3.034 and fixed in v.11.3.0.34 allows a local attcker to execute arbitrary code via the BOOTia32.efi and a crafted cloak32.dat file on the ESP. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix debugfs UAF on adapter removal
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting
to clean up an endpoint that was never initialized.
When configuring the MIDI 2.0 gadget via configfs and setting the block
direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out
endpoint is explicitly skipped during the gadget bind phase
(f_midi2_bind()). As a result, the usb_ep->card field remains NULL.
Later, when the host sets the alternate setting, f_midi2_set_alt()
unconditionally stops both the IN and OUT endpoints by calling
f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both
endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized
midi1_ep_out, it attempts to dereference usb_ep->card to determine the
number of requests to free, leading to a crash.
Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs
in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during
f_midi2_init_ep() and remains 0 if the endpoint was never initialized,
safely avoiding the loop. For consistency, apply the same change to
f_midi2_alloc_ep_reqs().
Oops: general protection fault, probably for non-canonical address
0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777]
...
RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166
[inline]
RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0
drivers/usb/gadget/function/f_midi2.c:1246
...
Call Trace:
<TASK>
f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296
composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933
configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 |
| Nodemailer before 9.1.0 fails to apply UTS-46 normalization when encoding international domain names, causing the domain resolver to compute a different Punycode A-label than standards-compliant parsers. Attackers can craft recipient addresses with invisible characters or compatibility mappings that pass domain allow-list checks but are delivered to attacker-controlled domains via SMTP. |
