| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Longjing Technology BEMS API versions up to and including 1.21 contains an unauthenticated arbitrary file download vulnerability in the 'downloads' endpoint. The 'fileName' parameter is not properly sanitized, allowing attackers to craft traversal sequences and access sensitive files outside the intended directory. |
| FiberHome AN5506-04-FA firmware versions up to and including RP2631 and HG6245D prior to RP2602 contain a stack-based buffer overflow, as the HTTP service ('webs') fails to enforce maximum lengths for Cookie header values. When a cookie longer than 511 bytes is processed, a stack buffer is overrun, leading to a crash or potential control of execution flow. |
| DBLTek GoIP-1 firmware versions up to and including GHSFVT-1.1-67-5 contain a local file inclusion vulnerability. The device's web server exposes handlers (`frame.html` and `frame.A100.html`) that accept a path parameter (`content` or `sidebar`) which is not properly validated or canonicalized. An attacker can supply directory-traversal sequences to cause the server to read and return arbitrary filesystem files that the webserver user can access. Other GoIP models and firmware versions are likely affected. Exploitation evidence was observed by the Shadowserver Foundation on 2024-03-21 UTC. |
| The Epson Stylus SX510W embedded web management service fails to properly handle consecutive ampersand characters in query parameters when accessing /PRESENTATION/HTML/TOP/INDEX.HTML. A remote attacker can send a malformed request that triggers improper input parsing or memory handling, resulting in the printer process shutting down or powering off, causing a denial of service condition. |
| Ozeki SMS Gateway versions up to and including 10.3.208 contain a path traversal vulnerability. Successful exploitation allows an unauthenticated attacker to use URL-encoded traversal sequences to read arbitrary files from the underlying filesystem with the privileges of the gateway service, leading to disclosure of sensitive information. |
| Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss. |
| Mintty is a terminal emulator for Cygwin, MSYS, and WSL. In versions 2.3.6 through 3.7.4, several escape sequences can cause the mintty process to access a file in a specific path. It is triggered by simply printing them out on bash. An attacker can specify an arbitrary network path, negotiate an ntlm hash out of the victim's machine to an attacker controlled remote host. An attacker can use password cracking tools or NetNTLMv2 hashes to Pass the Hash. Version 3.7.5 fixes the issue. |
| Ceph is a distributed object, block, and file storage platform. In versions up to and including 19.2.3, using the argument `x-amz-copy-source` to put an object and specifying an empty string as its content leads to the RGW daemon crashing, resulting in a DoS attack. As of time of publication, no known patched versions exist. |
| Dell SmartFabric OS10 Software, versions prior to 10.6.1.0, contain an Improper Control of Generation of Code ('Code Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution. |
| A vulnerability was reported in the Lenovo Scanner pro application during an internal security assessment that, under certain circumstances, could allow an attacker on the same logical network to disclose sensitive user files from the application. |
| A vulnerability was identified in Campcodes School Fees Payment Management System 1.0. Impacted is an unknown function of the file /ajax.php?action=save_student. The manipulation of the argument ID leads to sql injection. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| A security flaw has been discovered in soerennb eXtplorer up to 2.1.15. The affected element is an unknown function of the component Filename Handler. The manipulation results in cross site scripting. The attack may be launched remotely. The patch is identified as 002def70b985f7012586df2c44368845bf405ab3. Applying a patch is advised to resolve this issue. |
| A flaw has been found in DinukaNavaratna Dee Store 1.0. Affected is an unknown function. Executing manipulation can lead to missing authorization. The attack may be performed from remote. The exploit has been published and may be used. Multiple endpoints are affected. |
| In Splunk Enterprise versions below 10.0.1, 9.4.5, 9.3.7, 9.2.9, and Splunk Cloud Platform versions below 10.0.2503.5, 9.3.2411.111, and 9.3.2408.121, an unauthenticated attacker could craft a malicious URL using the `return_to` parameter of the Splunk Web login endpoint. When an authenticated user visits the malicious URL, it could cause an unvalidated redirect to an external malicious site. To be successful, the attacker has to trick the victim into initiating a request from their browser. The unauthenticated attacker should not be able to exploit the vulnerability at will. |
| In Splunk Enterprise versions below 10.0.1, 9.4.5, 9.3.7, and 9.2.9 and Splunk Cloud Platform versions below 9.3.2411.116, 9.3.2408.124, 10.0.2503.5 and 10.1.2507.1, a low-privileged user that does not hold the “admin“ or “power“ Splunk roles could run a saved search with a risky command using the permissions of a higher-privileged user to bypass the SPL safeguards for risky commands. They could bypass these safeguards on the “/services/streams/search“ endpoint through its “q“ parameter by circumventing endpoint restrictions using character encoding in the REST path. The vulnerability requires the attacker to phish the victim by tricking them into initiating a request within their browser. The authenticated user should not be able to exploit the vulnerability at will. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: verify orphan file size is not too big
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: skcipher - Fix reqsize handling
Commit afddce13ce81d ("crypto: api - Add reqsize to crypto_alg")
introduced cra_reqsize field in crypto_alg struct to replace type
specific reqsize fields. It looks like this was introduced specifically
for ahash and acomp from the commit description as subsequent commits
add necessary changes in these alg frameworks.
However, this is being recommended for use in all crypto algs [1]
instead of setting reqsize using crypto_*_set_reqsize(). Using
cra_reqsize in skcipher algorithms, hence, causes memory
corruptions and crashes as the underlying functions in the algorithm
framework have not been updated to set the reqsize properly from
cra_reqsize. [2]
Add proper set_reqsize calls in the skcipher init function to
properly initialize reqsize for these algorithms in the framework.
[1]: https://lore.kernel.org/linux-crypto/aCL8BxpHr5OpT04k@gondor.apana.org.au/
[2]: https://gist.github.com/Pratham-T/24247446f1faf4b7843e4014d5089f6b |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ice_adapter: release xa entry on adapter allocation failure
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store) |
