| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix possible crash when setting up bsg fails
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value.
Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)"
will not be satisfied, preventing execution from entering
bsg_remove_queue(), which could lead to the following crash:
BUG: kernel NULL pointer dereference, address: 000000000000041c
Call Trace:
<TASK>
mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr]
mpi3mr_remove+0x6f/0x340 [mpi3mr]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19d/0x220
unbind_store+0xa4/0xb0
kernfs_fop_write_iter+0x11f/0x200
vfs_write+0x1fc/0x3e0
ksys_write+0x67/0xe0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x78/0xe2 |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix uninit-value in vxlan_vnifilter_dump()
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1].
If the length of the netlink message payload is less than
sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes
beyond the message. This can lead to uninit-value access. Fix this by
returning an error in such situations.
[1]
BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786
netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317
__netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline]
rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882
netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4110 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205
kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196
netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: fix softlockup in __read_vmcore (part 2)
Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int3472: Check for adev == NULL
Not all devices have an ACPI companion fwnode, so adev might be NULL. This
can e.g. (theoretically) happen when a user manually binds one of
the int3472 drivers to another i2c/platform device through sysfs.
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
If platform_get_resource_byname() fails and returns NULL because DT lacks
an 'mmio' property for the MHI endpoint, dereferencing res->start will
cause a NULL pointer access. Add a check to prevent it.
[kwilczynski: error message update per the review feedback]
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of
CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test
and trigger a WARN_ON:
WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646
Call trace:
arm_smmu_init_one_queue+0x15c/0x210
tegra241_cmdqv_init_structures+0x114/0x338
arm_smmu_device_probe+0xb48/0x1d90
Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: fix memleak if msg_init_ns failed in create_ipc_ns
Percpu memory allocation may failed during create_ipc_ns however this
fail is not handled properly since ipc sysctls and mq sysctls is not
released properly. Fix this by release these two resource when failure.
Here is the kmemleak stack when percpu failed:
unreferenced object 0xffff88819de2a600 (size 512):
comm "shmem_2nstest", pid 120711, jiffies 4300542254
hex dump (first 32 bytes):
60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H.....
04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V.....
backtrace (crc be7cba35):
[<ffffffff81b43f83>] __kmalloc_node_track_caller_noprof+0x333/0x420
[<ffffffff81a52e56>] kmemdup_noprof+0x26/0x50
[<ffffffff821b2f37>] setup_mq_sysctls+0x57/0x1d0
[<ffffffff821b29cc>] copy_ipcs+0x29c/0x3b0
[<ffffffff815d6a10>] create_new_namespaces+0x1d0/0x920
[<ffffffff815d7449>] copy_namespaces+0x2e9/0x3e0
[<ffffffff815458f3>] copy_process+0x29f3/0x7ff0
[<ffffffff8154b080>] kernel_clone+0xc0/0x650
[<ffffffff8154b6b1>] __do_sys_clone+0xa1/0xe0
[<ffffffff843df8ff>] do_syscall_64+0xbf/0x1c0
[<ffffffff846000b0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fabrics: fix kernel crash while shutting down controller
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
The above kernel crash is regression caused due to changes implemented
in commit a54a93d0e359 ("nvme: move stopping keep-alive into
nvme_uninit_ctrl()"). Ideally we should stop keep-alive before destroyin
g the admin queue and freeing the admin tagset so that it wouldn't sneak
in during the shutdown operation. However we removed the keep alive stop
operation from the beginning of the controller shutdown code path in commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()")
and added it under nvme_uninit_ctrl() which executes very late in the
shutdown code path after the admin queue is destroyed and its tagset is
removed. So this change created the possibility of keep-alive sneaking in
and interfering with the shutdown operation and causing observed kernel
crash.
To fix the observed crash, we decided to move nvme_stop_keep_alive() from
nvme_uninit_ctrl() to nvme_remove_admin_tag_set(). This change would ensure
that we don't forward progress and delete the admin queue until the keep-
alive operation is finished (if it's in-flight) or cancelled and that would
help contain the race condition explained above and hence avoid the crash.
Moving nvme_stop_keep_alive() to nvme_remove_admin_tag_set() instead of
adding nvme_stop_keep_alive() to the beginning of the controller shutdown
code path in nvme_stop_ctrl(), as was the case earlier before commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"),
would help save one callsite of nvme_stop_keep_alive(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat/qat_420xx - fix off by one in uof_get_name()
This is called from uof_get_name_420xx() where "num_objs" is the
ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of
bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat/qat_4xxx - fix off by one in uof_get_name()
The fw_objs[] array has "num_objs" elements so the > needs to be >= to
prevent an out of bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/bluefield: Fix potential integer overflow
The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx
left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as
32-bits wide the left-shift operation truncates the upper 16 bits of
information during the calculation of the SMC argument.
The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any
potential integer overflow, i.e. loss of data from upper 16 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
KCSAN reports a data race when access the krcp->monitor_work.timer.expires
variable in the schedule_delayed_monitor_work() function:
<snip>
BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu
read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1:
schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline]
kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839
trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441
bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203
generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849
bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143
__sys_bpf+0x2e5/0x7a0
__do_sys_bpf kernel/bpf/syscall.c:5741 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5739 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739
x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0:
__mod_timer+0x578/0x7f0 kernel/time/timer.c:1173
add_timer_global+0x51/0x70 kernel/time/timer.c:1330
__queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523
queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552
queue_delayed_work include/linux/workqueue.h:677 [inline]
schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline]
kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310
worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_unbound kfree_rcu_monitor
<snip>
kfree_rcu_monitor() rearms the work if a "krcp" has to be still
offloaded and this is done without holding krcp->lock, whereas
the kvfree_call_rcu() holds it.
Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so
both functions do not race anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
Fix a kernel crash with the below call trace when the SCPI firmware
returns OPP count of zero.
dvfs_info.opp_count may be zero on some platforms during the reboot
test, and the kernel will crash after dereferencing the pointer to
kcalloc(info->count, sizeof(*opp), GFP_KERNEL).
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
| Mem abort info:
| ESR = 0x96000004
| Exception class = DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c
| [0000000000000028] pgd=0000000000000000
| Internal error: Oops: 96000004 [#1] SMP
| scpi-hwmon: probe of PHYT000D:00 failed with error -110
| Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c)
| CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1
| Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS
| pstate: 60000005 (nZCv daif -PAN -UAO)
| pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi]
| lr : clk_register+0x438/0x720
| Call trace:
| scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi]
| devm_clk_hw_register+0x50/0xa0
| scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi]
| scpi_clocks_probe+0x528/0x70c [clk_scpi]
| platform_drv_probe+0x58/0xa8
| really_probe+0x260/0x3d0
| driver_probe_device+0x12c/0x148
| device_driver_attach+0x74/0x98
| __driver_attach+0xb4/0xe8
| bus_for_each_dev+0x88/0xe0
| driver_attach+0x30/0x40
| bus_add_driver+0x178/0x2b0
| driver_register+0x64/0x118
| __platform_driver_register+0x54/0x60
| scpi_clocks_driver_init+0x24/0x1000 [clk_scpi]
| do_one_initcall+0x54/0x220
| do_init_module+0x54/0x1c8
| load_module+0x14a4/0x1668
| __se_sys_finit_module+0xf8/0x110
| __arm64_sys_finit_module+0x24/0x30
| el0_svc_common+0x78/0x170
| el0_svc_handler+0x38/0x78
| el0_svc+0x8/0x340
| Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820)
| ---[ end trace 06feb22469d89fa8 ]---
| Kernel panic - not syncing: Fatal exception
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x10,a0002008
| Memory Limit: none |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constprop.0+0x20c/0x230
? _raw_spin_unlock_irqrestore+0x3c/0x70
ath9k_wmi_cmd+0x41d/0x610
? mark_held_locks+0x9f/0xe0
...
Since this bug has been confirmed to be caused by insufficient verification
of conn_rsp_epid, I think it would be appropriate to add a range check for
conn_rsp_epid to htc_connect_service() to prevent the bug from occurring. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___slab_alloc+0x12ef/0x35e0
kmem_cache_alloc_bulk_noprof+0x486/0x1330
__io_alloc_req_refill+0x84/0x560
io_submit_sqes+0x172f/0x2f30
__se_sys_io_uring_enter+0x406/0x41c0
__x64_sys_io_uring_enter+0x11f/0x1a0
x64_sys_call+0x2b54/0x3ba0
do_syscall_64+0xcd/0x1e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Since an instance of 'struct kiocb' may be passed from the block layer
with 'private' field uninitialized, introduce 'ocfs2_iocb_init_rw_locked()'
and use it from where 'ocfs2_dio_end_io()' might take care, i.e. in
'ocfs2_file_read_iter()' and 'ocfs2_file_write_iter()'. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: clk-apple-nco: Add NULL check in applnco_probe
Add NULL check in applnco_probe, to handle kernel NULL pointer
dereference error. |
