sooperset mcp-atlassian io.py validate_safe_path path traversal

A vulnerability was identified in sooperset mcp-atlassian up to 0.24.0. This issue affects the function validate_safe_path of the file src/mcp_atlassian/utils/io.py. The manipulation of the argument path leads to path traversal. The attack may be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 0.24.1 is capable of addressing this issue. Upgrading the affected component is recommended. This CVE was requested by the vendor.

WordPress WPIDE – File Manager & Code Editor plugin <= 3.6.4 - Cross Site Request Forgery (CSRF) vulnerability

Cross-Site Request Forgery (CSRF) vulnerability in XplodedThemes WPIDE – File Manager & Code Editor wpide allows Cross Site Request Forgery.This issue affects WPIDE – File Manager & Code Editor: from n/a through 3.6.4.

Uncontrolled XML entity expansion in the Flock Installer app for Android

An uncontrolled XML entity expansion vulnerability in the Flock Installer app for Android before version 2.35.0 allows an attacker who has a valid technician account and controls or impersonates the camera being set up to crash the app, on devices running Android 10, 11 or 12, by returning a camera configuration response that contains nested XML entity declarations. The vulnerability does not allow the attacker to read or change data on the device, and no customer license plate, video or location data is exposed. Android 13 and later reject the response. The issue is fixed in version 2.35.0; update to 2.35.0 or later.

Information exposure in Flock Safety Platform public access-list sign-up

An information exposure flaw in the public access-list sign-up feature of the Flock Safety Platform, present from 2026-06-23 to 2026-10-22, allowed a remote, unauthenticated attacker who had a community's public sign-up link and a registered vehicle's license plate to retrieve that registrant's name, email address, home address and approval status. Each lookup required solving a CAPTCHA. No license plate reader detections, images or video were exposed. Flock remediated the issue in the hosted service on 2026-10-22; no customer action is required.

Wagtail: Improper restriction handling on descendant collections in Documents and Images API

Wagtail is an open source content management system built on Django. Prior to 7.0.9, 7.3.4, 7.4.3, and 8.0rc2, the Wagtail Documents and Images API V2 excludes directly restricted collections but fails to exclude their descendant collections, even though descendants inherit ancestor view restrictions. An API user can therefore list the filenames and names of documents and images stored in descendant collections that should remain private. This issue is fixed in versions 7.0.9, 7.3.4, 7.4.3, and 8.0rc2.

pyLoad: Authentication bypass in API key validation (check_apikey cache)

pyLoad is a free and open-source download manager written in Python. Prior to 0.5.0b3.dev101, Api.check_apikey caches successful validation in self._apikey_cache using only the attacker-controlled key_id. After a legitimate key populates the cache, a forged API key with the same key_id reaches the cache-hit path without comparing apikey[-43:] to the stored hash through hmac.compare_digest. Key identifiers are small sequential integers, so an unauthenticated remote attacker can enumerate an active identifier and inherit the cached key owner's permissions during the 300-second cache lifetime. This issue is fixed in version 0.5.0b3.dev101.

Dynatrace MCP Server: create_dynatrace_notebook missing the human-approval gate

Dynatrace MCP Server is an MCP server for Dynatrace Observability. Prior to 1.8.7, the create_dynatrace_notebook registration in src/index.ts performs a persistent document-write action without calling requestHumanApproval, although the project's other write tools use that gate to obtain operator consent. A caller can create tenant-visible notebooks containing attacker-controlled Markdown or DQL content, and tenant users may later execute embedded DQL when opening the notebook. The tool also lacks a destructiveHint annotation that would signal its side effects to MCP clients. This issue is fixed in version 1.8.7.

Dynatrace MCP Server: DQL injection via parameters not documented as DQL

Dynatrace MCP Server is an MCP server for Dynatrace Observability. Prior to 2.1.1, several read capabilities interpolate caller-controlled values into DQL without sufficient validation or escaping. The src/capabilities/find-monitored-entity-by-name.ts capability embeds entityNames in string searches, src/capabilities/list-problems.ts, src/capabilities/list-vulnerabilities.ts, and src/capabilities/list-exceptions.ts embed timeframe values, and src/capabilities/get-events-for-cluster.ts embeds timeframe, clusterId, and kubernetesEntityId. Crafted values can close string literals, append pipeline stages, or comment out the remaining intended query, allowing callers to bypass field selection, time-window, and result-display limits in tools marked readOnlyHint. The issue does not grant data access beyond the configured token's existing execute_dql capability, but it breaks the narrower auto-approved tool contract. This issue is fixed in version 2.1.1.

Signal K Server: Unauthenticated path traversal in resources-provider v2 API leads to JWT secret disclosure, admin impersonation and remote code execution

Signal K Server is a server application that runs on a central hub in a boat. From 2.0.0 until 2.34.0 for Signal K Server and from 1.0.0 until 1.5.3 for @signalk/resources-provider, the v2 REST route GET /signalk/v2/api/resources/:resourceType/:resourceId accepts an unsafe resourceId that can escape the intended resource directory. The route passes the attacker-controlled resourceId through src/api/resources/index.ts to FileStore.getResource() in packages/resources-provider-plugin/src/filestorage.ts without adequate path containment, allowing arbitrary JSON files reachable by the server to be read. Related PUT and DELETE resource operations can write or delete files outside the storage root. Deployments with allow_readonly enabled permit anonymous reads, while other deployments require a readonly user token. Reading security.json exposes the HS256 JWT signing secret and password hashes, allowing an attacker to forge an administrator token. Administrative access to POST /skServer/providers can then create an Execute provider that runs commands with the server process privileges and persists its configuration across restarts. This issue is fixed in Signal K Server 2.34.0 and @signalk/resources-provider 1.5.3.

Open redirect in the Liberty ID-FF service provider single sign-on flow

OpenAM (OpenAM Consortium Edition) 14.0.5 and earlier contains an open redirect vulnerability (CWE-601) in the Liberty ID-FF service provider single sign-on flow. The goto parameter of the /preLogin endpoint is stored as the RelayState of the Liberty ID-FF authentication request without validation, and after the user completes single sign-on at the identity provider, the assertion consumer service redirects the browser to that value. A remote unauthenticated attacker can induce a user to access a crafted URL and, after the user authenticates, redirect the user to an arbitrary website, which may be used for phishing. Only deployments in which a Liberty ID-FF hosted service provider is configured are affected; Liberty ID-FF is not configured by default. This issue is fixed in 14.0.6, which disables the legacy Liberty ID-FF endpoints.

A vulnerability has been identified in Mendix Studio Pro 11 (All versions >= V11.15.0 < V11.16.0), Mendix Studio Pro 11.12 (All versions >= V11.12.6 < V11.12.7). The affected products MCP Server does not properly restrict its HTTP listener to the loopback interface, leaving it potentially exposed to remote systems. This could allow an attacker with network access to interact with the MCP Server remotely.

Incorrect validation of TLS certificates in the MatchPoint Android app

Incorrect validation of TLS certificates in the MatchPoint Android app due to a TrustManager that accepts any certificate and a permissive hostname validator. Additionally, the app allows unencrypted HTTP traffic. An attacker capable of intercepting the victim's traffic could read and modify communications, including credentials and personal data.

Apache OFBiz: Missing authorization in payment application services allows view-only users to modify payment allocations

Missing check for  ACCOUNTING_UPDATE /  ACCOUNTING_CREATE in accounting in allows user with only ACCOUNTING_VIEW permission to update/create PaymentApplication. Affected versions before : 24.09.08 Users are recommended to upgrade to version 24.09.08 which fixes this issue.

Android TelephonyProvider Permission Bypass Vulnerability

In checkQueryPermission of TelephonyProvider.java, there is a possible permission bypass due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.

In Kura versions <= 5.6.2, the "Command" file-upload handler at `POST /admin/denali/file/command` extracts a client-supplied ZIP archive into the configured `command.working.directory`. The path-containment check `validateFileName()` compares canonical paths with `String.startsWith()` without appending a trailing path separator, so an entry that canonicalises to a sibling directory sharing the same string prefix (e.g. `/tmpevil/x` when the intended directory is `/tmp`) is accepted. The handler then calls `parent.mkdirs()` and `new FileOutputStream(newFile)`, creating directories and writing attacker-controlled bytes outside the intended extraction root. The command service is disabled by default since Kura 4.0.0 [1]. The issue does not apply when the command service is disabled. The caller must be authenticated with `rest.command` permission.

In Kura versions <= 5.6.2, `CommandCloudApp.execute()` extracts a caller-supplied ZIP archive into a caller-supplied directory inside the Kura JVM process before dispatching the command to the executor service. On a packaged Kura installation the JVM runs as `kurad` with `CAP_DAC_OVERRIDE`, while the configurable "Unprivileged" executor drops to the `kura` user via `su`. A caller with permissions `rest.command` who is intentionally restricted to unprivileged command execution (`privileged.command.service.enable=false`, the default) can therefore set `workingDirectory` to `/` and use the ZIP body to write or overwrite arbitrary files on the device as `kurad`, completely bypassing the unprivileged sandbox the operator selected. The command service is disabled by default since Kura 4.0.0 [1]. The issue does not apply when the command service is disabled. [1] https://github.com/eclipse-kura/kura/blob/f9f969231892769a269876b23f19fa0e8173e3df/kura/distrib/RELEASE_NOTES.txt#L94

In Eclipse Kura versions 5.4.0 through 5.6.2, the Service Listing V1 REST API read the JSON body of every request into memory, with no limit on its size. The endpoints parse the body before they check whether the caller is authenticated. A remote attacker without valid credentials can therefore send a few dozen large JSON requests at the same time, exhaust the Java heap with an `OutOfMemoryError`, and cause a denial of service. Likewise, a remote attacker, can send a deeply nested JSON request and trigger a `StackOverflowError` because of an unbound recursion in Service Listing V1.

Multiple Vulnerabilities in IBM API Connect

IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow an attacker to gain unauthorized access to an organization due to improper verification of a cryptographic signature. A token is accepted without its signature being fully verified, which could allow an attacker to join an organization without a valid invitation.

IBM API Connect Path Traversal

IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to view arbitrary files on the system due to a path traversal vulnerability. A specially crafted URL request could allow directories outside the intended location to be accessed.

Multiple Vulnerabilities in IBM API Connect

IBM API Connect 10.0.8.0 through 10.0.8.12 and 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to execute arbitrary JavaScript in the victim's browser due to cross-site scripting. User-supplied input is not properly neutralized when a web page is updated, so script content could run in another user's session.