Search vulnerabilities

Results 12,177

CVE-2026-23234

f2fs: fix to avoid UAF in f2fs_write_end_io()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-3847

Memory safety bugs fixed in Firefox 148.0.2

Memory safety bugs present in Firefox 148.0.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148.0.2.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-27854

Use after free when parsing EDNS options in Lua

An attacker might be able to trigger a use-after-free by sending crafted DNS queries to a DNSdist using the DNSQuestion:getEDNSOptions method in custom Lua code. In some cases DNSQuestion:getEDNSOptions might refer to a version of the DNS packet that has been modified, thus triggering a use-after-free and potentially a crash resulting in denial of service.

CVSS 3.1 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-3777

Use after free of view cache in Foxit PDF Editor/Reader

The application does not properly validate the lifetime and validity of internal view cache pointers after JavaScript changes the document zoom and page state. When a script modifies the zoom property and then triggers a page change, the original view object may be destroyed while stale pointers are still kept and later dereferenced, which under crafted JavaScript and document structures can lead to a use-after-free condition and potentially allow arbitrary code execution.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-31053

A double free vulnerability exists in librz/bin/format/le/le.c in the function le_load_fixup_record(). When processing malformed or circular LE fixup chains, relocation entries may be freed multiple times during error handling. A specially crafted LE binary can trigger heap corruption and cause the application to crash, resulting in a denial-of-service condition. An attacker with a crafted binary could cause a denial of service when the tool is integrated on a service pipeline.

CVSS 3.1 · 6.2 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-5877

chromium-browser: Use after free in Navigation

Use after free in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Medium)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Apple Google Linux and 1 more
Products
CVE-2026-34734

HDF5: H5T__conv_struct Use After Free

HDF5 is software for managing data. In 1.14.1-2 and earlier, a heap-use-after-free was found in the h5dump helper utility. An attacker who can supply a malicious h5 file can trigger a heap use-after-free. The freed object is referenced in a memmove call from H5T__conv_struct. The original object was allocated by H5D__typeinfo_init_phase3 and freed by H5D__typeinfo_term.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-34446

ONNX: Arbitrary File Read via ExternalData Hardlink Bypass in ONNX load

Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. Prior to version 1.21.0, there is an issue in onnx.load, the code checks for symlinks to prevent path traversal, but completely misses hardlinks because a hardlink looks exactly like a regular file on the filesystem. This issue has been patched in version 1.21.0.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Products
CVE-2026-34983

Wasmtime has a use-after-free bug after cloning `wasmtime::Linker`

Wasmtime is a runtime for WebAssembly. In 43.0.0, cloning a wasmtime::Linker is unsound and can result in use-after-free bugs. This bug is not controllable by guest Wasm programs. It can only be triggered by a specific sequence of embedder API calls made by the host. Specifically, the following steps must occur to trigger the bug clone a wasmtime::Linker, drop the original linker instance, use the new, cloned linker instance, resulting in a use-after-free. This vulnerability is fixed in 43.0.1.

CVSS 4.0 · 1 Low EPSS < 1% KEV · Not listed
Products
CVE-2024-2414

Unprotected Primary Channel vulnerability in Movistar 4G router

The primary channel is unprotected on Movistar 4G router affecting E version S_WLD71-T1_v2.0.201820. This device has the 'adb' service open on port 5555 and provides access to a shell with root privileges.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2025-14569

ggml-org whisper.cpp common-whisper.cpp read_audio_data use after free

A vulnerability was detected in ggml-org whisper.cpp up to 1.8.2. Affected is the function read_audio_data of the file /whisper.cpp/examples/common-whisper.cpp. The manipulation results in use after free. The attack requires a local approach. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

CVSS 4.0 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-45405

gix-path improperly resolves configuration path reported by Git

`gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original. On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors.

CVSS 3.1 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-38910

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble version was discovered to contain a use-after-free in the nav2_amcl process. This vulnerability is triggered via sending a request to change dynamic parameters.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-43703

GPU DDK - Duplicate calls to RGXCreateFreeList on the same reservation leads to GPU UAF

Software installed and run as a non-privileged user may conduct improper GPU system calls to achieve unauthorised reads and writes of physical memory from the GPU HW.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
Ddk
CVE-2024-38375

@fastly/js-compute use-after-free in some host call implementations

@fastly/js-compute is a JavaScript SDK and runtime for building Fastly Compute applications. The implementation of several functions were determined to include a use-after-free bug. This bug could allow for unintended data loss if the result of the preceding functions were sent anywhere else, and often results in a guest trap causing services to return a 500. This bug has been fixed in version 3.16.0 of the `@fastly/js-compute` package.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-65953

NanoMQ UAF of retain message due to invalid MQTTV5 properties

NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.22.5, a Heap-Use-After-Free (UAF) vulnerability exists in the TCP transport component of NanoMQ, which relies on the underlying NanoNNG library (specifically in src/sp/transport/mqtt/broker_tcp.c). The vulnerability is due to improper resource management and premature cleanup of message and pipe structures under specific malformed MQTTV5 retain message traffic conditions. This issue has been patched in version 0.22.5.

CVSS 4.0 · 6 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-38920

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` .

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-8058

glibc: Double free in glibc

The regcomp function in the GNU C library version from 2.4 to 2.41 is subject to a double free if some previous allocation fails. It can be accomplished either by a malloc failure or by using an interposed malloc that injects random malloc failures. The double free can allow buffer manipulation depending of how the regex is constructed. This issue affects all architectures and ABIs supported by the GNU C library.

CVSS 4.0 · 5.9 Medium EPSS < 1% KEV · Not listed
Vendors
Gnu
Products
CVE-2023-7033

Insufficient Resource Pool vulnerability in Ethernet function of Mitsubishi Electric Corporation MELSEC iQ-R series CPU module, MELSEC iQ-L series CPU module, MELSEC iQ-R Ethernet Interface Module, MELSEC iQ-R CC-Link IE TSN Master/Local Module, CC-Link IE TSN Remote I/O Module, CC-Link IE TSN Analog-Digital Converter Module, CC-Link IE TSN Digital-Analog Converter Module, CC-Link IE TSN - CC-Link IE Field Network Bridge Module, CC-Link IE TSN - AnyWireASLINK Bridge Module, CC-Link IE TSN FPGA Module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Motion Module, MELSEC iQ-L Motion Module, MELSEC iQ-F FX5 Motion Module, MELSEC iQ-F Series CPU module, MELSEC iQ-F Series Ethernet module, MELSEC iQ-F Series Ethernet/IP module, MELSEC iQ-F Series OPC UA Module, MELSEC iQ-F Series CC-Link IE TSN master/local module, GOT2000 Series CC-Link IE TSN Communication Unit, FR-A800-E series inverters, FR-F800-E series inverters, FR-E800-E series inverters, INVERTER CC-Link IE TSN Plug-in option, INVERTER CC-Link IE TSN Safety Plug-in option, INVERTER CC-Link IE TSN communication function built-in type, MR-J5 series AC Servos MELSERVO, MR-JET series AC Servos MELSERVO, MR-MD333G series AC Servos MELSERVO, MR-JE series AC Servos MELSERVO, MELSERVO-J4 AC Servos MELSERVO and Embedded Type Servo System Controller allow a remote attacker to cause a temporary Denial of Service condition for a certain period of time in Ethernet communication of the products by performing TCP SYN Flood attack.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—