| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl'
variable, and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently tagged_addr_ctrl_set() will consume an
arbitrary value, potentially leaking up to 64 bits of memory from the
kernel stack. The read is limited to a specific slot on the stack, and
the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and
rejects other values, a partial SETREGSET attempt will randomly succeed
or fail depending on the value of the uninitialized value, and the
exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the
user_aarch64_view used by a native AArch64 task to manipulate another
native AArch64 task. As get_tagged_addr_ctrl() only returns an error
value when called for a compat task, tagged_addr_ctrl_get() and
tagged_addr_ctrl_set() should never observe an error value from
get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that
such an error would be unexpected, and error handlnig is not missing in
either case. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
This will ensure that the scsi host is cleaned up properly using
scsi_host_dev_release(). Otherwise, it may lead to memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: Prevent rtime decompress memory corruption
The rtime decompression routine does not fully check bounds during the
entirety of the decompression pass and can corrupt memory outside the
decompression buffer if the compressed data is corrupted. This adds the
required check to prevent this failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will
return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s)
hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80
[<ffffffffba11b4c5>] dst_alloc+0x55/0x250
[<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0
[<ffffffffba23050a>] __mkroute_output+0x29a/0xa50
[<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240
[<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90
[<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500
[<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0
[<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0
[<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0
[<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80
[<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360
[<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0
[<ffffffffba239b8e>] ip_local_deliver+0xee/0x360
[<ffffffffba239ead>] ip_rcv+0xad/0x2f0
[<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140
Call dst_release() to free the dst memory when
inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix for a potential deadlock
This fixes a 'possible circular locking dependency detected' warning
CPU0 CPU1
---- ----
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
Fix this by temporarily releasing the reset_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: check buffer length before accessing it
Syzkaller reports an uninit value read from ax25cmp when sending raw message
through ieee802154 implementation.
=====================================================
BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119
nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601
nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774
nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299
ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282
ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
=====================================================
This issue occurs because the skb buffer is too small, and it's actual
allocation is aligned. This hides an actual issue, which is that nr_route_frame
does not validate the buffer size before using it.
Fix this issue by checking skb->len before accessing any fields in skb->data.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip: samsung-hdptx: Set drvdata before enabling runtime PM
In some cases, rk_hdptx_phy_runtime_resume() may be invoked before
platform_set_drvdata() is executed in ->probe(), leading to a NULL
pointer dereference when using the return of dev_get_drvdata().
Ensure platform_set_drvdata() is called before devm_pm_runtime_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
soc: imx8m: Probe the SoC driver as platform driver
With driver_async_probe=* on kernel command line, the following trace is
produced because on i.MX8M Plus hardware because the soc-imx8m.c driver
calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock
driver is not yet probed. This was not detected during regular testing
without driver_async_probe.
Convert the SoC code to platform driver and instantiate a platform device
in its current device_initcall() to probe the platform driver. Rework
.soc_revision callback to always return valid error code and return SoC
revision via parameter. This way, if anything in the .soc_revision callback
return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get
retried later.
"
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603
Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : imx8mm_soc_revision+0xdc/0x180
lr : imx8mm_soc_revision+0xd0/0x180
sp : ffff8000821fbcc0
x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120
x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311
x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb
x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff
x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8
x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801
x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c
x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3
x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb
Call trace:
imx8mm_soc_revision+0xdc/0x180
imx8_soc_init+0xb0/0x1e0
do_one_initcall+0x94/0x1a8
kernel_init_freeable+0x240/0x2a8
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
SoC: i.MX8MP revision 1.1
" |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adding array index check to prevent memory corruption
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to
restrict this maximum depth to a more reasonable value not to harm
performance. Remove unnecessary WARN_ON_ONCE which is reachable from
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
acpi_dev_hid_match() does not check for adev == NULL, dereferencing
it unconditional.
Add a check for adev being NULL before calling acpi_dev_hid_match().
At the moment acpi_quirk_skip_serdev_enumeration() is never called with
a controller_parent without an ACPI companion, but better safe than sorry. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/prom_init: Fixup missing powermac #size-cells
On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit
045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells
handling").
For example:
Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000
WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
...
Call Trace:
of_bus_n_size_cells+0x98/0x108 (unreliable)
of_bus_default_count_cells+0x40/0x60
__of_get_address+0xc8/0x21c
__of_address_to_resource+0x5c/0x228
pmz_init_port+0x5c/0x2ec
pmz_probe.isra.0+0x144/0x1e4
pmz_console_init+0x10/0x48
console_init+0xcc/0x138
start_kernel+0x5c4/0x694
As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.
Depends-on: 045b14ca5c36 ("of: WARN on deprecated #address-cells/#size-cells handling") |
| In the Linux kernel, the following vulnerability has been resolved:
quota: flush quota_release_work upon quota writeback
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dum
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix handling of plane refcount
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is
corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent
info, btrfs_search_slot() doesn't check if the target root is NULL or
not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot(). |
