| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| CairoSVG is an SVG converter based on Cairo, a 2D graphics library. Prior to Kozea/CairoSVG has exponential denial of service via recursive <use> element amplification in cairosvg/defs.py. This causes CPU exhaustion from a small input. |
| LibreChat is a ChatGPT clone with additional features. Prior to 0.8.3-rc1, a Denial of Service (DoS) vulnerability exists in the DELETE /api/convos endpoint that allows an authenticated attacker to crash the Node.js server process by sending malformed requests. The DELETE /api/convos route handler attempts to destructure req.body.arg without validating that it exists. The server crashes due to an unhandled TypeError that bypasses Express error handling middleware and triggers process.exit(1). This vulnerability is fixed in 0.8.3-rc1. |
| There is a memory corruption vulnerability due to an out-of-bounds write when loading a corrupted DSB file in Digilent DASYLab. This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted .DSB file. This vulnerability affects all versions of Digilent DASYLab. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Ays Pro Fox LMS fox-lms allows Blind SQL Injection.This issue affects Fox LMS: from n/a through <= 1.0.6.3. |
| Missing authentication for critical function vulnerability in ABB AWIN GW100 rev.2, ABB AWIN GW120.This issue affects AWIN GW100 rev.2: 2.0-0, 2.0-1; AWIN GW120: 1.2-0, 1.2-1. |
| The authentication mechanism for a specific feature in the EasyShare module contains a vulnerability. If specific conditions are met on a local network, it can cause data leakage |
| In UNIX Fourth Research Edition (v4), the su command is vulnerable to a buffer overflow due to the 'password' variable having a fixed size of 100 bytes. A local user can exploit this to gain root privileges. It is unlikely that UNIX v4 is running anywhere outside of a very small number of lab environments. |
| The web interface on multiple Omada switches does not adequately validate certain external inputs, which may lead to out-of-bound memory access when processing crafted requests. Under specific conditions, this flaw may result in unintended command execution.<br>An unauthenticated attacker with network access to the affected interface may cause memory corruption, service instability, or information disclosure. Successful exploitation may allow remote code execution or denial-of-service. |
| Dagu is a workflow engine with a built-in Web user interface. Prior to 2.2.4, the dagRunId request field accepted by the inline DAG execution endpoints is passed directly into filepath.Join to construct a temporary directory path without any format validation. Go's filepath.Join resolves .. segments lexically, so a caller can supply a value such as ".." to redirect the computed directory outside the intended /tmp/<name>/<id> path. A deferred cleanup function that calls os.RemoveAll on that directory then runs unconditionally when the HTTP handler returns, deleting whatever directory the traversal resolved to. With dagRunId set to "..", the resolved directory is the system temporary directory (/tmp on Linux). On non-root deployments, os.RemoveAll("/tmp") removes all files in /tmp owned by the dagu process user, disrupting every concurrent dagu run that has live temp files. On root or Docker deployments, the call removes the entire contents of /tmp, causing a system-wide denial of service. This vulnerability is fixed in 2.2.4. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, there is an out-of-bounds read in freerdp_bitmap_decompress_planar when SrcSize is 0. The function dereferences *srcp (which points to pSrcData) without first verifying that SrcSize >= 1. When SrcSize is 0 and pSrcData is non-NULL, this reads one byte past the end of the source buffer. This vulnerability is fixed in 3.24.0. |
| Missing Authorization vulnerability in UX-themes Flatsome flatsome allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Flatsome: from n/a through <= 3.19.6. |
| Missing Authorization vulnerability in Iulia Cazan Latest Post Shortcode latest-post-shortcode allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Latest Post Shortcode: from n/a through <= 14.2.1. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in weDevs WP ERP erp allows SQL Injection.This issue affects WP ERP: from n/a through <= 1.16.10. |
| Missing Authorization vulnerability in Josh Kohlbach Advanced Coupons for WooCommerce Coupons advanced-coupons-for-woocommerce-free allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Advanced Coupons for WooCommerce Coupons: from n/a through <= 4.7.1. |
| LibreChat is a ChatGPT clone with additional features. From 0.8.2 to 0.8.2-rc3, The MCP (Model Context Protocol) OAuth callback endpoint accepts the redirect from the identity provider and stores OAuth tokens for the user who initiated the flow, without verifying that the browser hitting the redirect URL is logged in or that the logged-in user matches the initiator. An attacker can send the authorization URL to a victim; when the victim completes the flow, the victim’s OAuth tokens are stored on the attacker’s LibreChat account, enabling account takeover of the victim’s MCP-linked services (e.g. Atlassian, Outlook). This vulnerability is fixed in 0.8.3-rc1. |
| Centrifugo is an open-source scalable real-time messaging server. Prior to 6.7.0, Centrifugo is vulnerable to Server-Side Request Forgery (SSRF) when configured with a dynamic JWKS endpoint URL using template variables (e.g. {{tenant}}). An unauthenticated attacker can craft a JWT with a malicious iss or aud claim value that gets interpolated into the JWKS fetch URL before the token signature is verified, causing Centrifugo to make an outbound HTTP request to an attacker-controlled destination. This vulnerability is fixed in 6.7.0. |
| OpenClaw is a personal AI assistant. Prior to 2026.3.11, browser-originated WebSocket connections could bypass origin validation when gateway.auth.mode was set to trusted-proxy and the request arrived with proxy headers. A page served from an untrusted origin could connect through a trusted reverse proxy, inherit proxy-authenticated identity, and establish a privileged operator session. This vulnerability is fixed in 2026.3.11. |
| OneUptime is a solution for monitoring and managing online services. Prior to 10.0.23, the telemetry aggregation API accepts user-controlled aggregationType, aggregateColumnName, and aggregationTimestampColumnName parameters and interpolates them directly into ClickHouse SQL queries via the .append() method (documented as "trusted SQL"). There is no allowlist, no parameterized query binding, and no input validation. An authenticated user can inject arbitrary SQL into ClickHouse, enabling full database read (including telemetry data from all tenants), data modification, and potential remote code execution via ClickHouse table functions. This vulnerability is fixed in 10.0.23. |
| OneUptime is a solution for monitoring and managing online services. Prior to 10.0.23, the Markdown viewer component renders Mermaid diagrams with securityLevel: "loose" and injects the SVG output via innerHTML. This configuration explicitly allows interactive event bindings in Mermaid diagrams, enabling XSS through Mermaid's click directive which can execute arbitrary JavaScript. Any field that renders markdown (incident descriptions, status page announcements, monitor notes) is vulnerable. This vulnerability is fixed in 10.0.23. |
