| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This CVE ID has been rejected as a duplicate. |
| This CVE ID has been rejected as a duplicate. |
| A local vulnerability in the Winlogbeat Windows installer caused runtime files to be placed in a directory writable by unprivileged users. A low-privileged attacker with existing access to the system could pre-position malicious filesystem links, causing a subsequent elevated Winlogbeat operation to write to or delete arbitrary files. Successful exploitation could result in a denial of service. |
| A vulnerability has been found in NousResearch hermes-agent up to 0.18.2. This affects the function HermesACPAgent.prompt of the file acp_adapter/session.py of the component ACP Prompt Workflow. Such manipulation leads to denial of service. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The inets application HTTP server httpd fails to enforce a configured body-size limit on chunked request.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_typescript allows an unauthenticated attacker to exhaust the BEAM atom table and abort the node via client-supplied RPC field names.
AshTypescript.FieldFormatter.convert_to_field_atom/2 in lib/ash_typescript/field_formatter.ex converts a client-supplied field name to an atom with String.to_atom/1 when no matching atom already exists. It delegates first to parse_input_field/2, which resolves the name with String.to_existing_atom/1 and falls back to returning the plain string; convert_to_field_atom/2 then mints an atom from that string rather than treating the name as unknown.
RPC field selection reaches it for every requested field name through AshTypescript.Rpc.FieldProcessing.FieldSelector, which resolves each name before checking that the field exists, with no allowlist, length bound, or rate limit. Atoms are never garbage collected, so each distinct name mints a permanent one and the VM aborts once the atom table limit is reached. A field name over 255 characters additionally raises an uncaught SystemLimitError.
This issue affects ash_typescript: from 0.1.0 before 0.18.0. |
| The mod_auth module in OTP's inets httpd server, when configured with dets or mnesia authentication backends and multiple directory configuration blocks, collapses all directory blocks into a single shared user/group namespace. A user added to one protected directory is accepted as valid for all other protected directories on the same server instance.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| An attacker that connects to an open Erlang TCP port that uses the inet driver with {packet,4} mode can use a signed overflow in an incorrect packet length calculation to overflow the receive buffer into the VM allocator area and beyond up to about 2 GB.
This would easily trash the allocated block's allocator metadata footer, and the next block, if any, and most likely cause the BEAM VM to crash. Utilizing this with precision enough to achieve Remote Code Execution would be extremely unfeasible.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to erts from 6.0 before 15.2.7.13, from 16.0 before 16.4.0.6, and from 17.0 before 17.0.6. Whether OTP before OTP 17.0, corresponding to erts before 6.0, is affected is unknown. |
| Exposure of Data Element to Wrong Session vulnerability in ash-project ash_graphql can deliver one subscription's resolved records to a different subscriber's topic.
AshGraphql.Subscription.Batcher.do_send/5 reads the resolved batch from the process dictionary via Process.get(:batch_resolved) and then unconditionally deletes it. That is sound only inside a task the library owns. On the :backpressure_sync and :noproc fallbacks do_send/5 runs inline in the publishing caller's process, so if a resolver inside an outer do_send/5 triggers another synchronous Ash notification, the inner call finds the outer run's value still under :batch_resolved, adopts it as its own result, and publishes it to the inner topic, a different subscription document with a different actor and tenant. It then deletes the key, so the outer run publishes nothing. The key is not namespaced by run, so records cannot be told apart. The fix saves, clears, and restores :batch_resolved around each run.
This issue affects ash_graphql: from 1.4.0 before 1.11.0. |
| Authorization Bypass Through User-Controlled Key vulnerability in ash-project ash_phoenix lets an attacker who controls filter form parameters filter across relationships the resource author marked non-public, turning the returned rows into a boolean oracle over private related data.
AshPhoenix.FilterForm resolved every relationship hop in the user-supplied path with Ash.Resource.Info.related/2, which traverses private relationships, and only checked the terminal field for publicity. parse_path_and_field/2 also rewrote a field naming a relationship into an extra path segment, so field=some_private_rel was accepted too. Both path and field come straight from form params, and the resulting ref went to Ash.Query.do_filter/2 without the public-only enforcement of Ash.Filter.parse_input/2. The fix resolves each hop with Ash.Resource.Info.public_relationship/2, rejecting the first non-public hop, and requires the terminal field to be public.
This issue affects ash_phoenix: from 0.6.0-rc.1 before 2.3.25. |
| Incorrect Authorization vulnerability in ash-project ash_typescript allows an unauthorized RPC caller to read attribute values that Ash field policies denied.
When a field policy denies an attribute, Ash substitutes %Ash.ForbiddenField{}, which retains the real value in original_value because embedded resources must remain writable, and hides it from Inspect rather than removing it. AshTypescript.Rpc.ResultProcessor strips these markers to nil on its template-driven paths, but normalize_primitive/1 in lib/ash_typescript/rpc/result_processor.ex had no such clause, so a marker fell through to the generic struct branch which calls Map.from_struct/1 and serializes every key, original_value included. The denied value is returned to the caller inside the marker that represents its own denial.
The simplest trigger is an action returning an embedded resource as a map, which routes through normalize_resource_struct/2 with an empty template. normalize_value_for_json/1 is a public, unguarded entry point to the same path.
This issue affects ash_typescript: from 0.11.0 before 0.18.0. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in ash-project ash_typescript allows an attacker who controls a path-parameter value to redirect a generated client's request, and the credentials attached to it, to an unintended route or an external origin.
The URL builders in lib/ash_typescript/typed_controller/codegen/route_renderer.ex replace each :param placeholder with a bare template interpolation and never call encodeURIComponent, so the value reaches executeTypedControllerRequest raw. A value containing ../ is normalised away by the fetch URL resolver and reaches a different route, while ? or # truncates the path and can smuggle or override query parameters. For a route whose path begins with a parameter, a value such as /evil.example.com/x yields the protocol-relative URL //evil.example.com/x, sending the request and the credentials from TypedControllerConfig to an attacker-controlled host. Nothing constrains the value at runtime: get_path_param_type/2 emits only a TypeScript type, which is erased.
The query-string path is unaffected, since URLSearchParams.set encodes its own values.
This issue affects ash_typescript: from 0.15.0 before 0.18.0. |
| Improper Input Validation vulnerability in ash-project ash_typescript allows a remote attacker to submit argument values outside a declared allowlist or bound on typed-controller routes.
AshTypescript.TypedController.RequestHandler in lib/ash_typescript/typed_controller/request_handler.ex calls Ash.Type.cast_input/3 and treats an {:ok, cast} result as fully validated. In Ash these are separate steps: cast_input/3 only coerces the term, while every constraint declared on the argument is applied by Ash.Type.apply_constraints/3, which this path never calls. Constraints such as one_of, max_length, min and max, and match are therefore inert, so a value outside a declared allowlist is accepted and passed to the route handler. Codegen renders the same constraints into the generated TypeScript types, so an allowlist appears enforced to a TypeScript caller while any other HTTP client ignores it. Empty-string to nil normalization also lives in apply_constraints, so the allow_nil?: false check accepts "" for a required argument.
Where a constraint gates a role, a status, or a sort direction, this becomes a privilege or state-machine bypass.
This issue affects ash_typescript: from 0.15.0 before 0.18.0. |
| Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to read internal application data from an HTTP 500 response body.
When a typed-controller route handler returns anything other than a %Plug.Conn{}, dispatch/3 in lib/ash_typescript/typed_controller/request_handler.ex passes the value to unexpected_return/2, which interpolates inspect(value, limit: 50) directly into the response message. The limit option bounds elements per collection rather than the term as a whole, so a handler falling through with a term such as {:error, %User{}} or a changeset serialises its full field set, including hashed passwords, tokens, and tenant identifiers, into the JSON error returned to the caller.
This contradicts the module's own posture elsewhere: the rescue clause gates Exception.message/1 behind AshTypescript.typed_controller_show_raised_errors?/0 and otherwise returns a generic message, while this path is ungated and always echoes.
This issue affects ash_typescript: from 0.15.0 before 0.18.0. |
| Improper Validation of Specified Quantity in Input vulnerability in ash-project ash allows an attacker to submit a non-finite decimal value that bypasses numeric bounds constraints or fails later operations on the value.
Ash.Type.Decimal cast input through Ecto's decimal cast in cast_input/2 and cast_stored/2 (lib/ash/type/decimal.ex) without checking that the resulting value is finite. Elixir's Decimal represents Infinity and NaN as valid structs, so a value such as "Infinity" or "NaN" passed casting and was persisted. Because NaN compares as false against every bound, min and max constraints do not reject it, and the stored special value later raises when used in Decimal arithmetic or is refused by the data layer, failing subsequent requests. The fix rejects any non-finite Decimal during casting.
This issue affects ash: from 1.28.0 before 3.32.2. |
| Improper Validation of Specified Type of Input vulnerability in ash-project ash lets an attacker confuse the stored type tag of an Ash.Type.Union value that uses storage: :map_with_tag, bypassing that member's validation and any tag-based authorization.
For a union with storage: :map_with_tag, each member is identified in storage by a configured tag and tag_value. Ash.Type.Union.dump_to_native/2 (lib/ash/type/union.ex) did not force the configured tag when writing the value, so a tag carried in the submitted value was persisted verbatim. An attacker can therefore store a value whose data belongs to one member but whose tag names a different member. On read the value is re-selected by its tag and treated as the incompatible member (a type confusion), bypassing the real member's constraints and any logic or policy that branches on the union tag. The fix drops any incoming tag and forces the configured tag value on dump.
This issue affects ash: from 2.14.18 before 3.32.2. |
| Not Failing Securely (Failing Open) vulnerability in ash-project ash skips an Ash.Reactor change when the guard controlling it raises, so a change meant to run does not.
An Ash.Reactor change step can be gated by where validations that decide whether the change runs. Ash.Reactor.ChangeStep (lib/ash/reactor/steps/change_step.ex) evaluated those guards in apply_where_clauses/3, and apply_validation rescued any exception into {:error, error}. The reduce treated that identically to a guard whose condition was simply not met and bypassed the change. So when a guard raises (for example on attacker-influenced input), a change that enforces a security-relevant modification is skipped rather than failing the step. The fix distinguishes a raised exception (now {:raised, error}) and halts the step with an error, failing closed.
This issue affects ash: from 3.0.0-rc.17 before 3.32.2. |
| Improper Access Control vulnerability in ash-project ash lets a create action overwrite an existing record when the ETS or Mnesia data layer is used, because neither enforced primary-key uniqueness on insert.
Unlike a SQL data layer, whose unique primary-key constraint rejects a duplicate, the ETS and Mnesia data layers implemented create as a keyed insert that replaces any existing entry with the same primary key (lib/ash/data_layer/ets/ets.ex, lib/ash/data_layer/mnesia/mnesia.ex). An actor who can set the primary key on a create (for example a user-supplied string or integer key) can submit a create whose key matches an existing record and silently overwrite it, destroying and replacing another entity's data without going through the update action or its policies. The fix rejects a create whose primary key already exists with an already-taken error, and only allows duplicates for keyless resources.
This issue affects ash: from 0.4.0 before 3.32.2. |
| Missing Authorization vulnerability in ash-project ash allows an actor to update records forbidden by resource policies through the atomic path of Ash.update_many/4.
Ash.update_many/4 runs as a single atomic statement (a data-layer update_many, for example a SQL MERGE) whenever an atomic strategy is used and the data layer supports it. Ash.Actions.Update.UpdateMany (lib/ash/actions/update/update_many.ex) took that path even under authorize?: true without applying the resource's policies, so the statement updated every row matched by primary key regardless of the policy filter that authorization would impose. An actor could therefore update records the policies forbid, such as rows belonging to another actor or tenant. The fix restricts the atomic path to data layers supporting changeset filters when authorizing, authorizes each changeset, and merges the resulting policy filter into each changeset so the statement only touches authorized rows.
This issue affects ash: from 3.29.0 before 3.32.2. |
| Incorrect Authorization vulnerability in ash-project ash authorizes an aggregate under one read action while computing it under another, so an aggregate can run with policies that do not match the action it was authorized against.
Ash.Actions.Aggregate groups aggregates by their {authorize?, read_action} and authorizes each group under that read action, but when building the data query it selected the action as opts[:action] || read_action || <primary read> (lib/ash/actions/aggregate.ex). When a caller passed an :action option, the aggregate query ran under that action while authorization had been computed for the group's own read_action. If the run action's read policies are more permissive than the authorized one, the aggregate (a count or sum) is computed over records the authorized action's policies would have excluded, disclosing information about data the actor cannot read. The fix runs the aggregate under the same read_action it is authorized against.
This issue affects ash: from 3.5.13 before 3.32.2. |
