| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix pci device refcount leak
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix panic due to wrong pageattr of im->image
In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.
At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:
insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c
bpftrace -e 'kretfunc:cmdline_proc_show {}'
BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
So fix this by checking the return value and calling mmc_free_host()
in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds check on Transfer Tag
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access. |
| A local privilege-escalation vulnerability has been discovered in the HPE Aruba Networking Virtual Intranet Access (VIA) client. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: skip splitting and logical rewriting on pre-alloc write
When doing a relocation, there is a chance that at the time of
btrfs_reloc_clone_csums(), there is no checksum for the corresponding
region.
In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item
and so ordered_extent's logical is set to some invalid value. Then,
btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a
block group and will hit an assert or a null pointer dereference as
following.
This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16
times) with a null_blk setup. The device's zone size and capacity is set to
32 MB and the storage size is set to 5 GB on my setup.
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00
> 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00
RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088
RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827
R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000
R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0
Call Trace:
<TASK>
? die_addr+0x3c/0xa0
? exc_general_protection+0x148/0x220
? asm_exc_general_protection+0x22/0x30
? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs]
? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs]
btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs]
? rcu_is_watching+0x11/0xb0
? lock_release+0x47a/0x620
? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs]
? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs]
? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs]
? __smp_call_single_queue+0x124/0x350
? rcu_is_watching+0x11/0xb0
btrfs_work_helper+0x19f/0xc60 [btrfs]
? __pfx_try_to_wake_up+0x10/0x10
? _raw_spin_unlock_irq+0x24/0x50
? rcu_is_watching+0x11/0xb0
process_one_work+0x8c1/0x1430
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0x52/0x60
worker_thread+0x100/0x12c0
? __kthread_parkme+0xc1/0x1f0
? __pfx_worker_thread+0x10/0x10
kthread+0x2ea/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
On the zoned mode, writing to pre-allocated region means data relocation
write. Such write always uses WRITE command so there is no need of splitting
and rewriting logical address. Thus, we can just skip the function for the
case. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix reference state management for synchronous callbacks
Currently, verifier verifies callback functions (sync and async) as if
they will be executed once, (i.e. it explores execution state as if the
function was being called once). The next insn to explore is set to
start of subprog and the exit from nested frame is handled using
curframe > 0 and prepare_func_exit. In case of async callback it uses a
customized variant of push_stack simulating a kind of branch to set up
custom state and execution context for the async callback.
While this approach is simple and works when callback really will be
executed only once, it is unsafe for all of our current helpers which
are for_each style, i.e. they execute the callback multiple times.
A callback releasing acquired references of the caller may do so
multiple times, but currently verifier sees it as one call inside the
frame, which then returns to caller. Hence, it thinks it released some
reference that the cb e.g. got access through callback_ctx (register
filled inside cb from spilled typed register on stack).
Similarly, it may see that an acquire call is unpaired inside the
callback, so the caller will copy the reference state of callback and
then will have to release the register with new ref_obj_ids. But again,
the callback may execute multiple times, but the verifier will only
account for acquired references for a single symbolic execution of the
callback, which will cause leaks.
Note that for async callback case, things are different. While currently
we have bpf_timer_set_callback which only executes it once, even for
multiple executions it would be safe, as reference state is NULL and
check_reference_leak would force program to release state before
BPF_EXIT. The state is also unaffected by analysis for the caller frame.
Hence async callback is safe.
Since we want the reference state to be accessible, e.g. for pointers
loaded from stack through callback_ctx's PTR_TO_STACK, we still have to
copy caller's reference_state to callback's bpf_func_state, but we
enforce that whatever references it adds to that reference_state has
been released before it hits BPF_EXIT. This requires introducing a new
callback_ref member in the reference state to distinguish between caller
vs callee references. Hence, check_reference_leak now errors out if it
sees we are in callback_fn and we have not released callback_ref refs.
Since there can be multiple nested callbacks, like frame 0 -> cb1 -> cb2
etc. we need to also distinguish between whether this particular ref
belongs to this callback frame or parent, and only error for our own, so
we store state->frameno (which is always non-zero for callbacks).
In short, callbacks can read parent reference_state, but cannot mutate
it, to be able to use pointers acquired by the caller. They must only
undo their changes (by releasing their own acquired_refs before
BPF_EXIT) on top of caller reference_state before returning (at which
point the caller and callback state will match anyway, so no need to
copy it back to caller). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
syzkaller reported use-after-free with the stack trace like below [1]:
[ 38.960489][ C3] ==================================================================
[ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240
[ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0
[ 38.966363][ C3]
[ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18
[ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 38.969959][ C3] Call Trace:
[ 38.970841][ C3] <IRQ>
[ 38.971663][ C3] dump_stack_lvl+0xfc/0x174
[ 38.972620][ C3] print_report.cold+0x2c3/0x752
[ 38.973626][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.974644][ C3] kasan_report+0xb1/0x1d0
[ 38.975720][ C3] ? ar5523_cmd_tx_cb+0x220/0x240
[ 38.976831][ C3] ar5523_cmd_tx_cb+0x220/0x240
[ 38.978412][ C3] __usb_hcd_giveback_urb+0x353/0x5b0
[ 38.979755][ C3] usb_hcd_giveback_urb+0x385/0x430
[ 38.981266][ C3] dummy_timer+0x140c/0x34e0
[ 38.982925][ C3] ? notifier_call_chain+0xb5/0x1e0
[ 38.984761][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.986242][ C3] ? lock_release+0x51c/0x790
[ 38.987323][ C3] ? _raw_read_unlock_irqrestore+0x37/0x70
[ 38.988483][ C3] ? __wake_up_common_lock+0xde/0x130
[ 38.989621][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 38.990777][ C3] ? lock_acquire+0x472/0x550
[ 38.991919][ C3] ? rcu_read_lock_sched_held+0xb/0x60
[ 38.993138][ C3] ? lock_acquire+0x472/0x550
[ 38.994890][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.996266][ C3] ? do_raw_spin_unlock+0x16f/0x230
[ 38.997670][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 38.999116][ C3] call_timer_fn+0x1a0/0x6a0
[ 39.000668][ C3] ? add_timer_on+0x4a0/0x4a0
[ 39.002137][ C3] ? reacquire_held_locks+0x4a0/0x4a0
[ 39.003809][ C3] ? __next_timer_interrupt+0x226/0x2a0
[ 39.005509][ C3] __run_timers.part.0+0x69a/0xac0
[ 39.007025][ C3] ? dummy_urb_enqueue+0x860/0x860
[ 39.008716][ C3] ? call_timer_fn+0x6a0/0x6a0
[ 39.010254][ C3] ? cpuacct_percpu_seq_show+0x10/0x10
[ 39.011795][ C3] ? kvm_sched_clock_read+0x14/0x40
[ 39.013277][ C3] ? sched_clock_cpu+0x69/0x2b0
[ 39.014724][ C3] run_timer_softirq+0xb6/0x1d0
[ 39.016196][ C3] __do_softirq+0x1d2/0x9be
[ 39.017616][ C3] __irq_exit_rcu+0xeb/0x190
[ 39.019004][ C3] irq_exit_rcu+0x5/0x20
[ 39.020361][ C3] sysvec_apic_timer_interrupt+0x8f/0xb0
[ 39.021965][ C3] </IRQ>
[ 39.023237][ C3] <TASK>
In ar5523_probe(), ar5523_host_available() calls ar5523_cmd() as below
(there are other functions which finally call ar5523_cmd()):
ar5523_probe()
-> ar5523_host_available()
-> ar5523_cmd_read()
-> ar5523_cmd()
If ar5523_cmd() timed out, then ar5523_host_available() failed and
ar5523_probe() freed the device structure. So, ar5523_cmd_tx_cb()
might touch the freed structure.
This patch fixes this issue by canceling in-flight tx cmd if submitted
urb timed out. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw(). |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: dbc: Fix memory leak in xhci_alloc_dbc()
If DbC is already in use, then the allocated memory for the xhci_dbc struct
doesn't get freed before returning NULL, which leads to a memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection(). |
| Nokia SR Linux is vulnerable to an authentication vulnerability allowing unauthorized access to the JSON-RPC service. When exploited, an invalid validation allows JSON RPC access without providing valid authentication credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: vringh: Fix copy_to_iter return value check
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: raa215300: Fix resource leak in case of error
The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and
this memory is not freed in the error path. Similarly, resources allocated
by clk_register_fixed_rate() are not freed in the error path.
Fix these issues by using devm_clk_hw_register_fixed_rate() and
devm_clk_hw_register_clkdev().
After this, the static variable clk is not needed. Replace it withÂ
local variable hw in probe() and drop calling clk_unregister_fixed_rate()
from raa215300_rtc_unregister_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.
XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.
Crash log:
general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
Code: ...
RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x32/0x80
? exc_general_protection+0x192/0x390
? asm_exc_general_protection+0x22/0x30
? 0xffffffffa000b514
? bpf_prog_03b13f331978c78c+0xf/0x28
mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
? dev_gro_receive+0x3b5/0x6e0
mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
__napi_poll+0x25/0x1a0
net_rx_action+0x28a/0x300
__do_softirq+0xcd/0x279
? sort_range+0x20/0x20
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xa2/0x130
kthread+0xc9/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF issue in f2fs_merge_page_bio()
As JY reported in bugzilla [1],
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : [0xffffffe51d249484] f2fs_is_cp_guaranteed+0x70/0x98
lr : [0xffffffe51d24adbc] f2fs_merge_page_bio+0x520/0x6d4
CPU: 3 UID: 0 PID: 6790 Comm: kworker/u16:3 Tainted: P B W OE 6.12.30-android16-5-maybe-dirty-4k #1 5f7701c9cbf727d1eebe77c89bbbeb3371e895e5
Tainted: [P]=PROPRIETARY_MODULE, [B]=BAD_PAGE, [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Workqueue: writeback wb_workfn (flush-254:49)
Call trace:
f2fs_is_cp_guaranteed+0x70/0x98
f2fs_inplace_write_data+0x174/0x2f4
f2fs_do_write_data_page+0x214/0x81c
f2fs_write_single_data_page+0x28c/0x764
f2fs_write_data_pages+0x78c/0xce4
do_writepages+0xe8/0x2fc
__writeback_single_inode+0x4c/0x4b4
writeback_sb_inodes+0x314/0x540
__writeback_inodes_wb+0xa4/0xf4
wb_writeback+0x160/0x448
wb_workfn+0x2f0/0x5dc
process_scheduled_works+0x1c8/0x458
worker_thread+0x334/0x3f0
kthread+0x118/0x1ac
ret_from_fork+0x10/0x20
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220575
The panic was caused by UAF issue w/ below race condition:
kworker
- writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #1 into bio & cache bio in
io->bio_list
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_merge_page_bio
- add_inu_page
: cache page #2 into bio which is linked
in io->bio_list
write
- f2fs_write_begin
: write page #1
- f2fs_folio_wait_writeback
- f2fs_submit_merged_ipu_write
- f2fs_submit_write_bio
: submit bio which inclues page #1 and #2
software IRQ
- f2fs_write_end_io
- fscrypt_free_bounce_page
: freed bounced page which belongs to page #2
- inc_page_count( , WB_DATA_TYPE(data_folio), false)
: data_folio points to fio->encrypted_page
the bounced page can be freed before
accessing it in f2fs_is_cp_guarantee()
It can reproduce w/ below testcase:
Run below script in shell #1:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
Run below script in shell #2:
for ((i=1;i>0;i++)) do xfs_io -f /mnt/f2fs/enc/file \
-c "pwrite 0 32k" -c "fdatasync"
So, in f2fs_merge_page_bio(), let's avoid using fio->encrypted_page after
commit page into internal ipu cache. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix race in do_task() when draining
When do_task() exhausts its iteration budget (!ret), it sets the state
to TASK_STATE_IDLE to reschedule, without a secondary check on the
current task->state. This can overwrite the TASK_STATE_DRAINING state
set by a concurrent call to rxe_cleanup_task() or rxe_disable_task().
While state changes are protected by a spinlock, both rxe_cleanup_task()
and rxe_disable_task() release the lock while waiting for the task to
finish draining in the while(!is_done(task)) loop. The race occurs if
do_task() hits its iteration limit and acquires the lock in this window.
The cleanup logic may then proceed while the task incorrectly
reschedules itself, leading to a potential use-after-free.
This bug was introduced during the migration from tasklets to workqueues,
where the special handling for the draining case was lost.
Fix this by restoring the original pre-migration behavior. If the state is
TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to
force a new loop iteration. This allows the task to finish its work, so
that a subsequent iteration can reach the switch statement and correctly
transition the state to TASK_STATE_DRAINED, stopping the task as intended. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/rtas: avoid device tree lookups in rtas_os_term()
rtas_os_term() is called during panic. Its behavior depends on a couple
of conditions in the /rtas node of the device tree, the traversal of
which entails locking and local IRQ state changes. If the kernel panics
while devtree_lock is held, rtas_os_term() as currently written could
hang.
Instead of discovering the relevant characteristics at panic time,
cache them in file-static variables at boot. Note the lookup for
"ibm,extended-os-term" is converted to of_property_read_bool() since it
is a boolean property, not an RTAS function token.
[mpe: Incorporate suggested change from Nick] |
| In the Linux kernel, the following vulnerability has been resolved:
hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
The "map_sz" is the number of elements in the "m" array so the >
comparison needs to be changed to >= to prevent an out of bounds
read. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: Fix incorrect handling for return value of devm_kzalloc
The return value of devm_kzalloc could be an null pointer,
use "!desc.pdata" to fix incorrect handling return value
of devm_kzalloc. |
