| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid data corruption caused by decline
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: protect device queue against concurrent access
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Nurul Amin WP System Information allows Retrieve Embedded Sensitive Data. This issue affects WP System Information: from n/a through 1.5. |
| An authenticated stored cross-site scripting (XSS) vulnerability exists in multiple WSO2 products due to improper validation of user-supplied input during API document upload in the Publisher portal. A user with publisher privileges can upload a crafted API document containing malicious JavaScript, which is later rendered in the browser when accessed by other users.
A successful attack could result in redirection to malicious websites, unauthorized UI modifications, or exfiltration of browser-accessible data. However, session-related sensitive cookies are protected by the httpOnly flag, preventing session hijacking. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/port: Fix delete_endpoint() vs parent unregistration race
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead. |
| A vulnerability was determined in axboe fio up to 3.41. This impacts the function __parse_jobs_ini of the file init.c. Executing manipulation can lead to use after free. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in Campcodes Online Beauty Parlor Management System 1.0. Affected is an unknown function of the file /admin/view-appointment.php. The manipulation of the argument viewid leads to sql injection. The attack can be initiated remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
media: gspca: cpia1: shift-out-of-bounds in set_flicker
Syzkaller reported the following issue:
UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27
shift exponent 245 is too large for 32-bit type 'int'
When the value of the variable "sd->params.exposure.gain" exceeds the
number of bits in an integer, a shift-out-of-bounds error is reported. It
is triggered because the variable "currentexp" cannot be left-shifted by
more than the number of bits in an integer. In order to avoid invalid
range during left-shift, the conditional expression is added. |
| A security flaw has been discovered in Campcodes Online Beauty Parlor Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/sales-reports-detail.php. The manipulation of the argument fromdate/todate results in sql injection. The attack can be launched remotely. The exploit has been released to the public and may be exploited. |
| A weakness has been identified in PHPJabbers Restaurant Menu Maker up to 1.1. Affected by this issue is some unknown functionality of the file /preview.php. This manipulation of the argument theme causes cross site scripting. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-blk: fix implicit overflow on virtio_max_dma_size
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead. |
| A security vulnerability has been detected in SourceCodester Pet Grooming Management Software 1.0. This affects an unknown part of the file /admin/edit.php. Such manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Syed Balkhi AffiliateWP – External Referral Links allows Stored XSS. This issue affects AffiliateWP – External Referral Links: from n/a through 1.2.0. |
| A security flaw has been discovered in Campcodes Gym Management System 1.0. Impacted is an unknown function of the file /ajax.php?action=login. Performing manipulation of the argument Username results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be exploited. |
| The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'move_as_original_file' function in all versions up to, and including, 4.2.6. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| A security flaw has been discovered in Campcodes Point of Sale System POS 1.0. Affected by this issue is some unknown functionality of the file /login.php. Performing manipulation of the argument Username results in sql injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Netcad Software Inc. Netigma allows Stored XSS.This issue affects Netigma: from 6.3.3 before 6.3.5 V8. |
| Authorization Bypass Through User-Controlled Key vulnerability in Anadolu Hayat Emeklilik Inc. AHE Mobile allows Privilege Abuse.This issue affects AHE Mobile: from 1.9.7 before 1.9.9. |
| The Product Options and Price Calculation Formulas for WooCommerce – Uni CPO (Premium) plugin for WordPress is vulnerable to arbitrary file uploads due to misconfigured file type validation in the 'uni_cpo_upload_file' function in all versions up to, and including, 4.9.54. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| danny-avila/librechat is affected by an authorization bypass vulnerability due to improper access control checks. The `checkAccess` function in `api/server/middleware/roles/access.js` uses `permissions.some()` to validate permissions, which incorrectly grants access if only one of multiple required permissions is present. This allows users with the 'USER' role to create agents despite having `CREATE: false` permission, as the check for `['USE', 'CREATE']` passes with just `USE: true`. This vulnerability affects other permission checks as well, such as `PROMPTS`. The issue is present in all versions prior to the fix. |
