| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When an application tells libcurl it wants to allow HTTP/2 server push, and the amount of received headers for the push surpasses the maximum allowed limit (1000), libcurl aborts the server push. When aborting, libcurl inadvertently does not free all the previously allocated headers and instead leaks the memory. Further, this error condition fails silently and is therefore not easily detected by an application. |
| When curl is told to use the Certificate Status Request TLS extension, often referred to as OCSP stapling, to verify that the server certificate is valid, it might fail to detect some OCSP problems and instead wrongly consider the response as fine. If the returned status reports another error than 'revoked' (like for example 'unauthorized') it is not treated as a bad certficate. |
| When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. |
| libcurl skips the certificate verification for a QUIC connection under certain conditions, when built to use wolfSSL. If told to use an unknown/bad cipher or curve, the error path accidentally skips the verification and returns OK, thus ignoring any certificate problems. |
| When asked to use a `.netrc` file for credentials **and** to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has a `default` entry that
omits both login and password. A rare circumstance. |
| A flaw was found in the util-linux chfn and chsh utilities when compiled with Readline support. The Readline library uses an "INPUTRC" environment variable to get a path to the library config file. When the library cannot parse the specified file, it prints an error message containing data from the file. This flaw allows an unprivileged user to read root-owned files, potentially leading to privilege escalation. This flaw affects util-linux versions prior to 2.37.4. |
| The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid input sequences in the ISO-2022-JP-3 encoding, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service. |
| The iconv function in the GNU C Library (aka glibc or libc6) 2.32 and earlier, when processing invalid multi-byte input sequences in IBM1364, IBM1371, IBM1388, IBM1390, and IBM1399 encodings, fails to advance the input state, which could lead to an infinite loop in applications, resulting in a denial of service, a different vulnerability from CVE-2016-10228. |
| The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read. |
| A flaw was found in glibc. The realpath() function can mistakenly return an unexpected value, potentially leading to information leakage and disclosure of sensitive data. |
| Kerberos 5 (aka krb5) 1.21.2 contains a memory leak in /krb5/src/lib/rpc/pmap_rmt.c. |
| Kerberos 5 (aka krb5) 1.21.2 contains a memory leak vulnerability in /krb5/src/lib/gssapi/krb5/k5sealv3.c. |
| A vulnerability was found in GNU Binutils 2.43. It has been declared as problematic. Affected by this vulnerability is the function bfd_putl64 of the file libbfd.c of the component ld. The manipulation leads to memory corruption. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is 75086e9de1707281172cc77f178e7949a4414ed0. It is recommended to apply a patch to fix this issue. |
| A vulnerability classified as critical was found in GNU Binutils 2.43. This vulnerability affects the function _bfd_elf_gc_mark_rsec of the file bfd/elflink.c of the component ld. The manipulation leads to memory corruption. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The name of the patch is 931494c9a89558acb36a03a340c01726545eef24. It is recommended to apply a patch to fix this issue. |
| valid.c in libxml2 before 2.9.13 has a use-after-free of ID and IDREF attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim()
syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken.
Reading frag_off can only be done if we pulled enough bytes
to skb->head. Currently we might access garbage.
[1]
BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
__kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098
__pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2673 [inline]
pskb_may_pull include/linux/skbuff.h:2681 [inline]
ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendms
---truncated--- |
| An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault. |
| An integer overflow flaw which could lead to an out of bounds write was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit signal are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server. |
| An integer overflow flaw, which could lead to an out of bounds write, was discovered in libssh2 before 1.8.1 in the way keyboard prompt requests are parsed. A remote attacker who compromises a SSH server may be able to execute code on the client system when a user connects to the server. |
| Issue summary: The AES-SIV cipher implementation contains a bug that causes
it to ignore empty associated data entries which are unauthenticated as
a consequence.
Impact summary: Applications that use the AES-SIV algorithm and want to
authenticate empty data entries as associated data can be misled by removing,
adding or reordering such empty entries as these are ignored by the OpenSSL
implementation. We are currently unaware of any such applications.
The AES-SIV algorithm allows for authentication of multiple associated
data entries along with the encryption. To authenticate empty data the
application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with
NULL pointer as the output buffer and 0 as the input buffer length.
The AES-SIV implementation in OpenSSL just returns success for such a call
instead of performing the associated data authentication operation.
The empty data thus will not be authenticated.
As this issue does not affect non-empty associated data authentication and
we expect it to be rare for an application to use empty associated data
entries this is qualified as Low severity issue. |
