| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A reflected Cross-Site Scripting (XSS) vulnerability has been identified in Clear2Pay Bank Visibility Application - Payment Execution 1.10.0.104 via the ID parameter in the URL. |
| Astro is a web framework that includes an image proxy. In versions 5.13.4 and later before 5.13.10, the image proxy domain validation can be bypassed by using backslashes in the href parameter, allowing server-side requests to arbitrary URLs. This can lead to server-side request forgery (SSRF) and potentially cross-site scripting (XSS). This vulnerability exists due to an incomplete fix for CVE-2025-58179. Fixed in 5.13.10. |
| Multiple CSRF attack vectors in JDownloads component 1.0.0-4.0.47 for Joomla were discovered. |
| Sliver is a command and control framework that uses a custom Wireguard netstack. In versions 1.5.43 and earlier, and in development version 1.6.0-dev, the netstack does not limit traffic between Wireguard clients. This allows clients to communicate with each other unrestrictedly, potentially enabling leaked or recovered keypairs to be used to attack operators or allowing port forwardings to be accessible from other implants. |
| Opencast is free and open source software for automated video capture and distribution. First noticed in Opencast 13 and 14, Opencast's Elasticsearch integration may generate syntactically invalid Elasticsearch queries in relation to previously acceptable search queries. From Opencast version 11.4 and newer, Elasticsearch queries are retried a configurable number of times in the case of error to handle temporary losses of connection to Elasticsearch. These invalid queries would fail, causing the retry mechanism to begin requerying with the same syntactically invalid query immediately, in an infinite loop. This causes a massive increase in log size which can in some cases cause a denial of service due to disk exhaustion.
Opencast 13.10 and Opencast 14.3 contain patches which address the base issue, with Opencast 16.7 containing changes which harmonize the search behaviour between the admin UI and external API. Users are strongly recommended to upgrade as soon as possible if running versions prior to 13.10 or 14.3. While the relevant endpoints require (by default) `ROLE_ADMIN` or `ROLE_API_SERIES_VIEW`, the problem queries are otherwise innocuous. This issue could be easily triggered by normal administrative work on an affected Opencast system. Those who run a version newer than 13.10 and 14.3 and see different results when searching in their admin UI vs your external API or LMS, may resolve the issue by upgrading to 16.7. No known workarounds for the vulnerability are available. |
| Indian Bank IndSMART Android App 3.8.1 is vulnerable to Missing SSL Certificate Validation in NuWebViewActivity. |
| Consul and Consul Enterprise’s (“Consul”) event endpoint is vulnerable to denial of service (DoS) due to lack of maximum value on the Content Length header. This vulnerability, CVE-2025-11375, is fixed in Consul Community Edition 1.22.0 and Consul Enterprise 1.22.0, 1.21.6, 1.20.8 and 1.18.12. |
| Inconsistent interpretation of http requests ('http request/response smuggling') in ASP.NET Core allows an authorized attacker to bypass a security feature over a network. |
| The LB-Link routers, including the BL-AC2100_AZ3 V1.0.4, BL-WR4000 v2.5.0, BL-WR9000_AE4 v2.4.9, BL-AC1900_AZ2 v1.0.2, BL-X26_AC8 v1.2.8, and BL-LTE300_DA4 V1.2.3 models, are vulnerable to unauthorized command injection. Attackers can exploit this vulnerability by accessing the /goform/set_serial_cfg interface to gain the highest level of device privileges without authorization, enabling them to remotely execute malicious commands. |
| The Blackmagic ATEM Mini Pro 2.7 exposes an undocumented Telnet service on TCP port 9993, which accepts unauthenticated plaintext commands for controlling streaming, recording, formatting storage devices, and system reboot. This interface, referred to as the "ATEM Ethernet Protocol 1.0", provides complete device control without requiring credentials or encryption. An attacker on the same network (or with remote access to the exposed port) can exploit this interface to execute arbitrary streaming commands, erase disks, or shut down the device - effectively gaining full remote control. |
| Taiga is an open source project management platform. In versions 6.8.3 and earlier, a remote code execution vulnerability exists in the Taiga API due to unsafe deserialization of untrusted data. This issue is fixed in version 6.9.0. |
| An Insecure Direct Object Reference (IDOR) vulnerability was discovered in ARD. The flaw exists in the `fe_uid` parameter of the payment history API endpoint. An authenticated attacker can manipulate this parameter to access the payment history of other users without authorization. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: socket: Lookup orig tuple for IPv6 SNAT
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No ne
---truncated--- |
| The Auto Featured Image (Auto Post Thumbnail) plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 4.1.7 via the upload_to_library function. This makes it possible for authenticated attackers, with Author-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. On Cloud instances, this issue allows for metadata retrieval. |
| Use of Hard-Coded Credentials issue exists in MZK-DP300N version 1.07 and earlier, which may allow an attacker within the local network to log in to the affected device via Telnet and execute arbitrary commands. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the QUOTA_USERS parameter when creating a user quota rule. When a user adds a new user quota rule the application issues an HTTP POST request to /cgi-bin/urlfilter.cgi with the MODE parameter set to USERQUOTA and the assigned user(s) provided in the QUOTA_USERS parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitation or encoding, allowing injected scripts to execute in the context of other users who view the affected quota entry. |
| A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed. |
| A flaw has been found in MaxSite CMS up to 109. This issue affects some unknown processing of the file application/maxsite/admin/plugins/editor_files/save-file-ajax.php. Executing manipulation of the argument file_path/content can lead to unrestricted upload. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| IPFire versions prior to 2.29 (Core Update 198) contain a stored cross-site scripting (XSS) vulnerability that allows an authenticated attacker to inject arbitrary JavaScript code through the IGNORE_ENTRY_REMARK parameter when adding a whitelisted host. When a whitelisted host is added, an HTTP POST request is sent to the Request-URI /cgi-bin/ids.cgi and the remark for the entry is provided in the IGNORE_ENTRY_REMARK parameter. The value of this parameter is stored and later rendered in the web interface without proper sanitization or encoding, allowing injected scripts to execute in the context of other users who view the affected whitelist entry. |
