| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix wq cleanup of WQCFG registers
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix async_free_space accounting for empty parcels
In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
fixed a kernel structure visibility issue. As part of that patch,
sizeof(void *) was used as the buffer size for 0-length data payloads so
the driver could detect abusive clients sending 0-length asynchronous
transactions to a server by enforcing limits on async_free_size.
Unfortunately, on the "free" side, the accounting of async_free_space
did not add the sizeof(void *) back. The result was that up to 8-bytes of
async_free_space were leaked on every async transaction of 8-bytes or
less. These small transactions are uncommon, so this accounting issue
has gone undetected for several years.
The fix is to use "buffer_size" (the allocated buffer size) instead of
"size" (the logical buffer size) when updating the async_free_space
during the free operation. These are the same except for this
corner case of asynchronous transactions with payloads < 8 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/mount_setattr: always cleanup mount_kattr
Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it. We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
While this code is executed with the wait_lock held, a reader can
acquire the lock without holding wait_lock. The writer side loops
checking the value with the atomic_cond_read_acquire(), but only truly
acquires the lock when the compare-and-exchange is completed
successfully which isn’t ordered. This exposes the window between the
acquire and the cmpxchg to an A-B-A problem which allows reads
following the lock acquisition to observe values speculatively before
the write lock is truly acquired.
We've seen a problem in epoll where the reader does a xchg while
holding the read lock, but the writer can see a value change out from
under it.
Writer | Reader
--------------------------------------------------------------------------------
ep_scan_ready_list() |
|- write_lock_irq() |
|- queued_write_lock_slowpath() |
|- atomic_cond_read_acquire() |
| read_lock_irqsave(&ep->lock, flags);
--> (observes value before unlock) | chain_epi_lockless()
| | epi->next = xchg(&ep->ovflist, epi);
| | read_unlock_irqrestore(&ep->lock, flags);
| |
| atomic_cmpxchg_relaxed() |
|-- READ_ONCE(ep->ovflist); |
A core can order the read of the ovflist ahead of the
atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire
semantics addresses this issue at which point the atomic_cond_read can
be switched to use relaxed semantics.
[peterz: use try_cmpxchg()] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl(). |
| Microsoft Local Security Authority Subsystem Service Information Disclosure Vulnerability |
| HashiCorp Nomad and Nomad Enterprise 1.4.0 up to 1.4.1 workload identity token can list non-sensitive metadata for paths under nomad/ that belong to other jobs in the same namespace. Fixed in 1.4.2. |
| XWiki Platform is a generic wiki platform. A vulnerability in versions from 5.0 to 16.7.1 affects users with Message Stream enabled and a wiki configured as closed from selecting "Prevent unregistered users to view pages" in the Administrations Rights. The vulnerability is that any message sent in a subwiki to "everyone" is actually sent to the farm: any visitor of the main wiki will be able to see that message through the Dashboard, even if the subwiki is configured to be private. This issue will not be patched as Message Stream has been deprecated in XWiki 16.8.0RC1 and is not maintained anymore. A workaround for this issue involves keeping Message Stream disabled by default. It's advised to keep it disabled from Administration > Social > Message Stream. |
| Open Management Infrastructure Information Disclosure Vulnerability |
| PHPGurukul Blood Donor Management System 1.0 does not properly restrict access to admin/dashboard.php, which allows attackers to access all data of users, delete the users, add and manage Blood Group, and Submit Report. |
| The package com.github.samtools:htsjdk before 3.0.1 are vulnerable to Creation of Temporary File in Directory with Insecure Permissions due to the createTempDir() function in util/IOUtil.java not checking for the existence of the temporary directory before attempting to create it. |
| Adobe Photoshop Elements version 5.2 (and earlier) is affected by an insecure temporary file creation vulnerability. An unauthenticated attacker could leverage this vulnerability to call functions against the installer to perform high privileged actions. Exploitation of this issue does not require user interaction. |
| Adobe Premiere Elements version 5.2 (and earlier) is affected by an insecure temporary file creation vulnerability. An unauthenticated attacker could leverage this vulnerability to call functions against the installer to perform high privileged actions. Exploitation of this issue does not require user interaction. |
| Shopware is an open commerce platform based on the Symfony php Framework and the Vue javascript framework. Affected versions of shopware do no properly set sensitive HTTP headers to be non-cacheable. If there is an HTTP cache between the server and client then headers may be exposed via HTTP caches. This issue has been resolved in version 6.4.8.2. There are no known workarounds. |
| Sylius is an open source eCommerce platform. Prior to versions 1.9.10, 1.10.11, and 1.11.2, any other user can view the data if browser tab remains unclosed after log out. The issue is fixed in versions 1.9.10, 1.10.11, and 1.11.2. A workaround is available. The application must strictly redirect to login page even browser back button is pressed. Another possibility is to set more strict cache policies for restricted content. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. A vulnerability in versions prior to `17.0.0-alpha.6`, `16.0.6`, `15.3.5`, `14.2.4`, and `13.6.6` allows renderers to obtain access to a bluetooth device via the web bluetooth API if the app has not configured a custom `select-bluetooth-device` event handler. This has been patched and Electron versions `17.0.0-alpha.6`, `16.0.6`, `15.3.5`, `14.2.4`, and `13.6.6` contain the fix. Code from the GitHub Security Advisory can be added to the app to work around the issue. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript (JS), HTML, and CSS. A vulnerability in versions prior to 18.0.0-beta.6, 17.2.0, 16.2.6, and 15.5.5 allows a renderer with JS execution to obtain access to a new renderer process with `nodeIntegrationInSubFrames` enabled which in turn allows effective access to `ipcRenderer`. The `nodeIntegrationInSubFrames` option does not implicitly grant Node.js access. Rather, it depends on the existing sandbox setting. If an application is sandboxed, then `nodeIntegrationInSubFrames` just gives access to the sandboxed renderer APIs, which include `ipcRenderer`. If the application then additionally exposes IPC messages without IPC `senderFrame` validation that perform privileged actions or return confidential data this access to `ipcRenderer` can in turn compromise your application / user even with the sandbox enabled. Electron versions 18.0.0-beta.6, 17.2.0, 16.2.6, and 15.5.5 contain a fix for this issue. As a workaround, ensure that all IPC message handlers appropriately validate `senderFrame`. |
| GoCD is a continuous delivery server. GoCD helps you automate and streamline the build-test-release cycle for continuous delivery of your product. GoCD versions prior to 21.1.0 leak the symmetric key used to encrypt/decrypt any secure variables/secrets in GoCD configuration to authenticated agents. A malicious/compromised agent may then expose that key from memory, and potentially allow an attacker the ability to decrypt secrets intended for other agents/environments if they also are able to obtain access to encrypted configuration values from the GoCD server. This issue is fixed in GoCD version 21.1.0. There are currently no known workarounds. |
