| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Samba, in the vfs_streams_xattr module, where uninitialized heap memory could be written into alternate data streams. This allows an authenticated user to read residual memory content that may include sensitive data, resulting in an information disclosure vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: gpib: fix unset padding field copy back to userspace
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: Fix release of uninitialized resources on error path
The commit in the fixes tag made sure that mlx5_vdpa_free()
is the single entrypoint for removing the vdpa device resources
added in mlx5_vdpa_dev_add(), even in the cleanup path of
mlx5_vdpa_dev_add().
This means that all functions from mlx5_vdpa_free() should be able to
handle uninitialized resources. This was not the case though:
mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx()
were not able to do so. This caused the splat below when adding
a vdpa device without a MAC address.
This patch fixes these remaining issues:
- Makes mlx5_vdpa_destroy_mr_resources() return early if called on
uninitialized resources.
- Moves mlx5_cmd_init_async_ctx() early on during device addition
because it can't fail. This means that mlx5_cmd_cleanup_async_ctx()
also can't fail. To mirror this, move the call site of
mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free().
An additional comment was added in mlx5_vdpa_free() to document
the expectations of functions called from this context.
Splat:
mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned?
------------[ cut here ]------------
WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0
[...]
Call Trace:
<TASK>
? __try_to_del_timer_sync+0x61/0x90
? __timer_delete_sync+0x2b/0x40
mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa]
genl_family_rcv_msg_doit+0xd8/0x130
genl_family_rcv_msg+0x14b/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
genl_rcv_msg+0x47/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x27b/0x3b0
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x1fa/0x210
? ___pte_offset_map+0x17/0x160
? next_uptodate_folio+0x85/0x2b0
? percpu_counter_add_batch+0x51/0x90
? filemap_map_pages+0x515/0x660
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x7b/0x2c0
? do_read_fault+0x108/0x220
? do_pte_missing+0x14a/0x3e0
? __handle_mm_fault+0x321/0x730
? count_memcg_events+0x13f/0x180
? handle_mm_fault+0x1fb/0x2d0
? do_user_addr_fault+0x20c/0x700
? syscall_exit_work+0x104/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0c25b0feca
[...]
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
Have nvmet_req_init() and req->execute() complete failed commands.
Description of the problem:
nvmet_req_init() calls __nvmet_req_complete() internally upon failure,
e.g., unsupported opcode, which calls the "queue_response" callback,
this results in nvmet_pci_epf_queue_response() being called, which will
call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is
different from DMA_TO_DEVICE. This results in a double completion as
nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod()
when nvmet_req_init() fails.
Steps to reproduce:
On the host send a command with an unsupported opcode with nvme-cli,
For example the admin command "security receive"
$ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096
This triggers a double completion as nvmet_req_init() fails and
nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still
in the default state of "DMA_NONE" as set by default in
nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called.
Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also
called in nvmet_pci_epf_exec_iod_work() leading to a double completion.
This not only sends two completions to the host but also corrupts the
state of the PCI NVMe target leading to kernel oops.
This patch lets nvmet_req_init() and req->execute() complete all failed
commands, and removes the double completion case in
nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where
double completions occurred. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix oops due to uninitialised variable
Fix smb3_init_transform_rq() to initialise buffer to NULL before calling
netfs_alloc_folioq_buffer() as netfs assumes it can append to the buffer it
is given. Setting it to NULL means it should start a fresh buffer, but the
value is currently undefined. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: sca3300: fix uninitialized iio scan data
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `channels` array is zeroed before use. |
| A vulnerability exists in the Windows sandbox where an uninitialized value in memory can be leaked to a renderer from a broker when making a call to access an otherwise unavailable file. This results in the potential leaking of information stored at that memory location. *Note: this issue only occurs on Windows. Other operating systems are unaffected.*. This vulnerability affects Thunderbird < 60.7, Firefox < 67, and Firefox ESR < 60.7. |
| An integer overflow vulnerability in the Skia library when allocating memory for edge builders on some systems with at least 8 GB of RAM. This results in the use of uninitialized memory, resulting in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.6, Firefox ESR < 52.6, and Firefox < 58. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Fix uninitialized array access for some pathnames
For filenames that begin with . and are between 2 and 5 characters long,
UDF charset conversion code would read uninitialized memory in the
output buffer. The only practical impact is that the name may be prepended a
"unification hash" when it is not actually needed but still it is good
to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Fix crash on isr after kexec()
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
[ joro: Fixed spelling in commit message ] |
| Untrusted pointer dereference in Microsoft Graphics Component allows an unauthorized attacker to execute code over a network. |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Update read pointer only after buffer is written
Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated
before the buffer is written, potentially causing race conditions where
the host sees an updated read pointer before the buffer is actually
written. Updating rd_offset prematurely can lead to the host accessing
an uninitialized or incomplete element, resulting in data corruption.
Invoke the buffer write before updating rd_offset to ensure the element
is fully written before signaling its availability. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: common: st_sensors: Fix use of uninitialize device structs
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix error unwind in rxe_create_qp()
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending
garbage on the four reserved tcp bits (th->res1)
Use skb_put_zero() to clear the whole TCP header,
as done in nf_reject_ip_tcphdr_put()
BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366
inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143
tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333
__inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679
inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750
__sys_connect_file net/socket.c:2061 [inline]
__sys_connect+0x606/0x690 net/socket.c:2078
__do_sys_connect net/socket.c:2088 [inline]
__se_sys_connect net/socket.c:2085 [inline]
__x64_sys_connect+0x91/0xe0 net/socket.c:2085
x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: move xe_svm_init() earlier
In xe_vm_close_and_put() we need to be able to call xe_svm_fini(),
however during vm creation we can call this on the error path, before
having actually initialised the svm state, leading to various splats
followed by a fatal NPD.
(cherry picked from commit 4f296d77cf49fcb5f90b4674123ad7f3a0676165) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`
Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix strp_init() order and cleanup
strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.
And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.
This also makes a lockdep warning reported by syzbot go away. |
