Search vulnerabilities

Results 34,399

CVE-2026-13072

MongoDB Improper Input Validation in Compute Mode External Data Processing Leading to Memory Corruption

When compute mode is enabled on a standalone mongod instance, insufficient validation of externally sourced BSON data during aggregation pipeline processing can result in memory corruption, potentially leading to process termination or other unintended behavior. This configuration is non-default and requires explicit enablement at startup.

CVSS 4.0 · 9.2 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-72381

ksmbd: fix use-after-free of fp->owner.name in durable handle owner check

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of fp->owner.name in durable handle owner check Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same persistent_id race the fp->owner.name compare-read in ksmbd_vfs_compare_durable_owner() against the kfree() in ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a standalone kstrdup() buffer whose lifetime is independent of the fp refcount, and the two sites share no lock: the compare reads the buffer while the reopen frees it, so the strcmp() can dereference freed memory. Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in ksmbd_reopen_durable_fd") made the fp->conn claim atomic under global_ft.lock (closing the owner.name double-free and the ksmbd_file write-UAF), but the compare-read versus reopen-free pair was left unserialized. BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80 Read of size 1 by task kworker strcmp ksmbd_vfs_compare_durable_owner smb2_check_durable_oplock smb2_open Freed by task kworker: kfree ksmbd_reopen_durable_fd smb2_open Allocated by task kworker: kstrdup session_fd_check smb2_session_logoff The buggy address belongs to the cache kmalloc-8 Serialize both sides of the race with fp->f_lock. The global durable file-table lock still protects the durable reconnect claim, but fp->owner.name is per-open state and does not need to block unrelated durable table lookups or reconnects. The teardown is left at its existing location after the reopen-success point so that an __open_id() rollback still retains owner.name for a later legitimate reconnect to verify.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75854

ArcadeDB Redis Wire-Protocol Plugin Missing Authentication

ArcadeDB versions before 26.8.1 contain a missing authentication vulnerability in the Redis wire-protocol plugin that allows unauthenticated attackers to read, write, and delete data. Attackers can connect to the Redis port and execute arbitrary commands against any database on the server without providing credentials, bypassing all security gates.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75835

Grav API Plugin before 1.0.14 Missing Authorization

Grav API plugin (getgrav/grav-plugin-api) before 1.0.14 contains a missing authorization vulnerability in userPassesAuthorize() (AbstractApiController.php). The function fails to consult the calling request's API key scopes, relying instead on the account's raw super-admin flag and ACL grants. As a result, an authenticated attacker holding a scoped API key minted on a privileged account can bypass their declared scope restrictions to access authorize-gated UI metadata and item definitions (sidebar/menubar/widget items and users-list columns/row-actions/filter-tabs) that their key scope should deny, resulting in information disclosure.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75094

COMFAST CF-N1-S CGI mbox-config sub_44B438 os command injection

A flaw has been found in COMFAST CF-N1-S 2.6.0.1. This impacts the function sub_44B438 of the file /cgi-bin/mbox-config?method=SET&section=ptest_ssid of the component CGI Interface. This manipulation of the argument ssid causes os command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used.

CVSS 4.0 · 9.4 Critical EPSS 3.2% KEV · Not listed
Vendors
Products
CVE-2026-65974

ERPNext: Server-Side Template Injection leading to Remote Code Execution

ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.111.0 and 16.22.0, limited authenticated users can cross a permission boundary in Frappe safe execution because frappe.render_template is exposed without forcing restrict_globals, allowing server-side template injection and remote code execution. This issue is fixed in versions 15.111.0 and 16.22.0.

CVSS 3.1 · 9.9 Critical EPSS 1.0% KEV · Not listed
Vendors
Products
CVE-2026-55674

Discourse: Cache poisoning/XSS via color scheme cookies

Discourse is an open-source discussion platform. Prior to 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, an unauthenticated attacker could send a single request with a crafted color_scheme_id (or dark_scheme_id) cookie to inject arbitrary HTML into a Discourse page. Because the cookie value was rendered into a color scheme tag without escaping, the attacker could break out of the attribute and inject a tag that bypassed Discourse's nonce-based Content Security Policy, resulting in arbitrary JavaScript execution in visitors' browsers. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-19977

EFM ipTIME A3004T Session Validation httpcon_check_session_url improper authentication

A vulnerability was detected in EFM ipTIME A3004T 14.19.0. The affected element is the function httpcon_check_session_url of the component Session Validation. Performing a manipulation results in improper authentication. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

CVSS 4.0 · 10 Critical EPSS 1.3% KEV · Not listed
Vendors
CVE-2026-42162

Mahara before 25.04.5 and 26.04.0 is vulnerable to artefacts being accessible to others under certain circumstances when the file path to an artefact in a page is manipulated.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-42163

Mahara before 25.04.5 and 26.04.0 is vulnerable to unauthorized access to internal accounts via Learning Tools Interoperability (LTI) under certain circumstances. This applies to LTI 1.1 and LTI 1.3 Advantage.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72278

KVM: arm64: nv: Re-translate VNCR before injecting abort

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72185

ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock()

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock() When ntfs_map_runlist_nolock() needs to look up the attribute extent containing a target VCN (ctx_needs_reset == true), it calls ntfs_attr_lookup() and then expects the result to be a non-resident attribute, since only non-resident attributes have a mapping pairs array to decompress. A crafted NTFS image can place a resident attribute where a non-resident one is expected, causing ntfs_attr_lookup() to succeed but return a resident attribute record. Previously this was caught only by a WARN_ON(), which does not stop execution. The code then falls through to read a->data.non_resident.highest_vcn from what is actually a resident attribute, accessing the wrong union member and corrupting the VCN range check. The caller path triggering this warning during mount is: ntfs_map_runlist_nolock ntfs_empty_logfile load_system_files ntfs_fill_super In this path ctx is NULL, so ntfs_map_runlist_nolock() allocates a temporary search context internally and sets ctx_needs_reset = true. The existing resident-attribute guard in the ctx != NULL branch already returns -EIO silently for the same condition; make the ctx_needs_reset path consistent by replacing the WARN_ON() with the same -EIO error return. This causes the crafted image to be rejected with a mount error instead of triggering a kernel warning.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72188

ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name()

In the Linux kernel, the following vulnerability has been resolved: ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name() ntfs_lookup_inode_by_name() returns MFT references read from directory index entries on disk. These values are untrusted, but the function can currently return an error-marked MFT reference to its callers without validating it. Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image can set the MREF error bit while leaving the low bits as an arbitrary value, causing callers to consume a bogus pseudo-errno instead of treating the lookup result as corrupted on-disk metadata. Fix this at the source by normalizing every error-marked MFT reference returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to all four directory lookup return paths so every caller gets a validated result without needing additional checks or an API change. This keeps the sanitization in the common lookup helper, which is cleaner than duplicating validation in each caller.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72199

ntfs: validate resident index root values on lookup

In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident index root values on lookup Resident $INDEX_ROOT values carry index header fields that callers consume after lookup. Some callers already validate parts of the layout before walking entries, but those checks are scattered and do not cover all root header invariants, such as entries_offset alignment and lower bound, index_length, and allocated_size consistency. The resident root resize paths now keep these header fields consistent while the value size changes: ntfs_ir_truncate() lowers index.allocated_size before shrinking the resident value, and ntfs_ir_reparent() grows the resident value before publishing a larger root header. Lookup-time validation can therefore cover these invariants without tripping over the driver's own resize paths. Add $INDEX_ROOT to the minimum resident value size table and validate the resident index header fields before returning the attribute from lookup. Require 8-byte aligned index header fields, a sane entries_offset, an index_length within allocated_size, allocated_size within the resident value, and enough entry space for at least an index entry header. The shared validator already rejects non-resident records for resident-only attribute types, including $INDEX_ROOT.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72211

ntfs: grow index root value before reparent header update

In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72422

ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O).

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75783

TRENDnet TEW-WLC100P DHCP blobmsg netifd stack-based overflow

A security vulnerability has been detected in TRENDnet TEW-WLC100P 12.07b01. Affected by this vulnerability is an unknown functionality of the file /sbin/netifd of the component DHCP blobmsg Handler. The manipulation leads to stack-based buffer overflow. The attack must be carried out from within the local network. The exploit has been disclosed publicly and may be used.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-75851

ArcadeDB before 26.8.1 Authentication Bypass via Async Command

ArcadeDB server (com.arcadedb:arcadedb-server) in versions 26.7.3 and earlier fails to propagate the authenticated principal to asynchronous command worker threads. When an HTTP command is submitted with awaitResponse:false, it executes on an async worker whose DatabaseContext has no bound user, causing the scripting authorization gate to become a no-op. A user with only read access to a single database can submit an asynchronous JavaScript (language=js) command via the /api/v1/command endpoint to run code with unrestricted host access (e.g., database.getSecurity().createUser) and create a server-wide administrator, escalating to full administrative control. Fixed in 26.8.1.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-75828

Grav before 2.0.15 Stored XSS via detectXss() Quote Bypass

Grav before 2.0.15 contains a stored cross-site scripting vulnerability in the detectXss() function where unpaired quotes in unquoted attribute values bypass event-handler detection. Authenticated editors can inject event handlers like onerror= that pass validation and execute in visitor browsers when page content is rendered.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-44004

WordPress WPCargo Track & Trace plugin <= 8.0.2 - SQL Injection vulnerability

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Arni Cinco WPCargo Track & Trace wpcargo allows SQL Injection. This issue affects WPCargo Track & Trace: before 8.0.4.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors