Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
14092 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35809 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/PM: Drain runtime-idle callbacks before driver removal A race condition between the .runtime_idle() callback and the .remove() callback in the rtsx_pcr PCI driver leads to a kernel crash due to an unhandled page fault [1]. The problem is that rtsx_pci_runtime_idle() is not expected to be running after pm_runtime_get_sync() has been called, but the latter doesn't really guarantee that. It only guarantees that the suspend and resume callbacks will not be running when it returns. However, if a .runtime_idle() callback is already running when pm_runtime_get_sync() is called, the latter will notice that the runtime PM status of the device is RPM_ACTIVE and it will return right away without waiting for the former to complete. In fact, it cannot wait for .runtime_idle() to complete because it may be called from that callback (it arguably does not make much sense to do that, but it is not strictly prohibited). Thus in general, whoever is providing a .runtime_idle() callback needs to protect it from running in parallel with whatever code runs after pm_runtime_get_sync(). [Note that .runtime_idle() will not start after pm_runtime_get_sync() has returned, but it may continue running then if it has started earlier.] One way to address that race condition is to call pm_runtime_barrier() after pm_runtime_get_sync() (not before it, because a nonzero value of the runtime PM usage counter is necessary to prevent runtime PM callbacks from being invoked) to wait for the .runtime_idle() callback to complete should it be running at that point. A suitable place for doing that is in pci_device_remove() which calls pm_runtime_get_sync() before removing the driver, so it may as well call pm_runtime_barrier() subsequently, which will prevent the race in question from occurring, not just in the rtsx_pcr driver, but in any PCI drivers providing .runtime_idle() callbacks. | ||||
| CVE-2024-35808 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/dm-raid: don't call md_reap_sync_thread() directly Currently md_reap_sync_thread() is called from raid_message() directly without holding 'reconfig_mutex', this is definitely unsafe because md_reap_sync_thread() can change many fields that is protected by 'reconfig_mutex'. However, hold 'reconfig_mutex' here is still problematic because this will cause deadlock, for example, commit 130443d60b1b ("md: refactor idle/frozen_sync_thread() to fix deadlock"). Fix this problem by using stop_sync_thread() to unregister sync_thread, like md/raid did. | ||||
| CVE-2024-35807 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize We observed a corruption during on-line resize of a file system that is larger than 16 TiB with 4k block size. With having more then 2^32 blocks resize_inode is turned off by default by mke2fs. The issue can be reproduced on a smaller file system for convenience by explicitly turning off resize_inode. An on-line resize across an 8 GiB boundary (the size of a meta block group in this setup) then leads to a corruption: dev=/dev/<some_dev> # should be >= 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 > /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test 2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per block group and 2^6 are the number of block groups that make a meta block group. The last checksum might be different depending on how the file is laid out across the physical blocks. The actual corruption occurs at physical block 63*2^15 = 2064384 which would be the location of the backup of the meta block group's block descriptor. During the on-line resize the file system will be converted to meta_bg starting at s_first_meta_bg which is 2 in the example - meaning all block groups after 16 GiB. However, in ext4_flex_group_add we might add block groups that are not part of the first meta block group yet. In the reproducer we achieved this by substracting the size of a whole block group from the point where the meta block group would start. This must be considered when updating the backup block group descriptors to follow the non-meta_bg layout. The fix is to add a test whether the group to add is already part of the meta block group or not. | ||||
| CVE-2024-35805 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm snapshot: fix lockup in dm_exception_table_exit There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. | ||||
| CVE-2024-35801 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. | ||||
| CVE-2024-35800 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware. | ||||
| CVE-2024-35797 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: cachestat: fix two shmem bugs When cachestat on shmem races with swapping and invalidation, there are two possible bugs: 1) A swapin error can have resulted in a poisoned swap entry in the shmem inode's xarray. Calling get_shadow_from_swap_cache() on it will result in an out-of-bounds access to swapper_spaces[]. Validate the entry with non_swap_entry() before going further. 2) When we find a valid swap entry in the shmem's inode, the shadow entry in the swapcache might not exist yet: swap IO is still in progress and we're before __remove_mapping; swapin, invalidation, or swapoff have removed the shadow from swapcache after we saw the shmem swap entry. This will send a NULL to workingset_test_recent(). The latter purely operates on pointer bits, so it won't crash - node 0, memcg ID 0, eviction timestamp 0, etc. are all valid inputs - but it's a bogus test. In theory that could result in a false "recently evicted" count. Such a false positive wouldn't be the end of the world. But for code clarity and (future) robustness, be explicit about this case. Bail on get_shadow_from_swap_cache() returning NULL. | ||||
| CVE-2024-35795 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix deadlock while reading mqd from debugfs An errant disk backup on my desktop got into debugfs and triggered the following deadlock scenario in the amdgpu debugfs files. The machine also hard-resets immediately after those lines are printed (although I wasn't able to reproduce that part when reading by hand): [ 1318.016074][ T1082] ====================================================== [ 1318.016607][ T1082] WARNING: possible circular locking dependency detected [ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted [ 1318.017598][ T1082] ------------------------------------------------------ [ 1318.018096][ T1082] tar/1082 is trying to acquire lock: [ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80 [ 1318.019084][ T1082] [ 1318.019084][ T1082] but task is already holding lock: [ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.020607][ T1082] [ 1318.020607][ T1082] which lock already depends on the new lock. [ 1318.020607][ T1082] [ 1318.022081][ T1082] [ 1318.022081][ T1082] the existing dependency chain (in reverse order) is: [ 1318.023083][ T1082] [ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0 [ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90 [ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330 [ 1318.025683][ T1082] do_one_initcall+0x6a/0x350 [ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.026728][ T1082] kernel_init+0x15/0x1a0 [ 1318.027242][ T1082] ret_from_fork+0x2c/0x40 [ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.028281][ T1082] [ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}: [ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330 [ 1318.029790][ T1082] do_one_initcall+0x6a/0x350 [ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.030722][ T1082] kernel_init+0x15/0x1a0 [ 1318.031168][ T1082] ret_from_fork+0x2c/0x40 [ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.032011][ T1082] [ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}: [ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.033487][ T1082] __might_fault+0x58/0x80 [ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu] [ 1318.034181][ T1082] full_proxy_read+0x55/0x80 [ 1318.034487][ T1082] vfs_read+0xa7/0x360 [ 1318.034788][ T1082] ksys_read+0x70/0xf0 [ 1318.035085][ T1082] do_syscall_64+0x94/0x180 [ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.035664][ T1082] [ 1318.035664][ T1082] other info that might help us debug this: [ 1318.035664][ T1082] [ 1318.036487][ T1082] Chain exists of: [ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [ 1318.036487][ T1082] [ 1318.037310][ T1082] Possible unsafe locking scenario: [ 1318.037310][ T1082] [ 1318.037838][ T1082] CPU0 CPU1 [ 1318.038101][ T1082] ---- ---- [ 1318.038350][ T1082] lock(reservation_ww_class_mutex); [ 1318.038590][ T1082] lock(reservation_ww_class_acquire); [ 1318.038839][ T1082] lock(reservation_ww_class_mutex); [ 1318.039083][ T1082] rlock(&mm->mmap_lock); [ 1318.039328][ T1082] [ 1318.039328][ T1082] *** DEADLOCK *** [ 1318.039328][ T1082] [ 1318.040029][ T1082] 1 lock held by tar/1082: [ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.040560][ T1082] [ 1318.040560][ T1082] stack backtrace: [ ---truncated--- | ||||
| CVE-2024-35794 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches. | ||||
| CVE-2024-35791 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region() Do the cache flush of converted pages in svm_register_enc_region() before dropping kvm->lock to fix use-after-free issues where region and/or its array of pages could be freed by a different task, e.g. if userspace has __unregister_enc_region_locked() already queued up for the region. Note, the "obvious" alternative of using local variables doesn't fully resolve the bug, as region->pages is also dynamically allocated. I.e. the region structure itself would be fine, but region->pages could be freed. Flushing multiple pages under kvm->lock is unfortunate, but the entire flow is a rare slow path, and the manual flush is only needed on CPUs that lack coherency for encrypted memory. | ||||
| CVE-2024-35790 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI. | ||||
| CVE-2024-35789 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. | ||||
| CVE-2024-35787 | 1 Redhat | 1 Enterprise Linux | 2024-11-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid1_make_request+0x6b0/0x1c08 [raid1] md_handle_request+0x1dc/0x368 [md_mod] md_submit_bio+0x80/0xf8 [md_mod] __submit_bio+0x178/0x300 submit_bio_noacct_nocheck+0x11c/0x338 submit_bio_noacct+0x134/0x614 submit_bio+0x28/0xdc submit_bh_wbc+0x130/0x1cc submit_bh+0x1c/0x28 | ||||
| CVE-2024-35264 | 2 Microsoft, Redhat | 4 .net, Visual Studio, Visual Studio 2022 and 1 more | 2024-11-21 | 8.1 High |
| .NET and Visual Studio Remote Code Execution Vulnerability | ||||
| CVE-2024-35235 | 2 Openprinting, Redhat | 6 Cups, Enterprise Linux, Rhel Aus and 3 more | 2024-11-21 | 4.4 Medium |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.8 and earlier, when starting the cupsd server with a Listen configuration item pointing to a symbolic link, the cupsd process can be caused to perform an arbitrary chmod of the provided argument, providing world-writable access to the target. Given that cupsd is often running as root, this can result in the change of permission of any user or system files to be world writable. Given the aforementioned Ubuntu AppArmor context, on such systems this vulnerability is limited to those files modifiable by the cupsd process. In that specific case it was found to be possible to turn the configuration of the Listen argument into full control over the cupsd.conf and cups-files.conf configuration files. By later setting the User and Group arguments in cups-files.conf, and printing with a printer configured by PPD with a `FoomaticRIPCommandLine` argument, arbitrary user and group (not root) command execution could be achieved, which can further be used on Ubuntu systems to achieve full root command execution. Commit ff1f8a623e090dee8a8aadf12a6a4b25efac143d contains a patch for the issue. | ||||
| CVE-2024-35176 | 2 Redhat, Ruby-lang | 2 Enterprise Linux, Rexml | 2024-11-21 | 5.3 Medium |
| REXML is an XML toolkit for Ruby. The REXML gem before 3.2.6 has a denial of service vulnerability when it parses an XML that has many `<`s in an attribute value. Those who need to parse untrusted XMLs may be impacted to this vulnerability. The REXML gem 3.2.7 or later include the patch to fix this vulnerability. As a workaround, don't parse untrusted XMLs. | ||||
| CVE-2024-34750 | 1 Redhat | 3 Enterprise Linux, Jboss Enterprise Web Server, Rhel Eus | 2024-11-21 | 7.5 High |
| Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue. | ||||
| CVE-2024-34397 | 1 Redhat | 2 Enterprise Linux, Service Interconnect | 2024-11-21 | 5.2 Medium |
| An issue was discovered in GNOME GLib before 2.78.5, and 2.79.x and 2.80.x before 2.80.1. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service. This could lead to the GDBus-based client behaving incorrectly, with an application-dependent impact. | ||||
| CVE-2024-34158 | 2 Go Build Constraint, Redhat | 9 Go Standard Library, Cryostat, Enterprise Linux and 6 more | 2024-11-21 | 7.5 High |
| Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion. | ||||
| CVE-2024-34156 | 2 Go Standard Library, Redhat | 13 Encoding\/gob, Advanced Cluster Security, Cryostat and 10 more | 2024-11-21 | 7.5 High |
| Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635. | ||||