| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ECOVACS robot lawnmowers store the anti-theft PIN in cleartext on the device filesystem. An attacker can steal a lawnmower, read the PIN, and reset the anti-theft mechanism. |
| ECOVACS robot lawn mowers and vacuums use a shared, static secret key to encrypt BLE GATT messages. An unauthenticated attacker within BLE range can control any robot using the same key. |
| ECOVACS robot lawnmowers and vacuums insecurely store audio files used to indicate that the camera is on. An attacker with access to the /data filesystem can delete or modify warning files such that users may not be aware that the camera is on. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix WARN_ON in iommu probe path
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79 |
| ECOVACS robot lawnmowers and vacuums use a deterministic root password generated based on model and serial number. An attacker with shell access can login as root. |
| An OS command injection vulnerability exists in various legacy D-Link routers—including DIR-300 rev B and DIR-600 (firmware ≤ 2.13 and ≤ 2.14b01, respectively)—due to improper input handling in the unauthenticated command.php endpoint. By sending specially crafted POST requests, a remote attacker can execute arbitrary shell commands with root privileges, allowing full takeover of the device. This includes launching services such as Telnet, exfiltrating credentials, modifying system configuration, and disrupting availability. The flaw stems from the lack of authentication and inadequate sanitation of the cmd parameter. |
| An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life. |
| ECOVACS robot lawnmowers and vacuums are vulnerable to command injection via SetNetPin() over an unauthenticated BLE connection. |
| The cloud service used by ECOVACS robot lawnmowers and vacuums allows authenticated attackers to bypass the PIN entry required to access the live video feed. |
| ECOVACS HOME mobile app plugins for specific robots do not properly validate TLS certificates. An unauthenticated attacker can read or modify TLS traffic and obtain authentication tokens. |
| ECOVACS robot vacuums and base stations communicate via an insecure Wi-Fi network with a deterministic AES encryption key, which can be easily derived. |
| ECOVACS vacuum robot base stations do not validate firmware updates, so malicious over-the-air updates can be sent to base station via insecure connection between robot and base station. |
| ECOVACS robot vacuums and base stations communicate via an insecure Wi-Fi network with a deterministic WPA2-PSK, which can be easily derived. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
Create subvolume, create snapshot and delete subvolume all use
btrfs_subvolume_reserve_metadata() to reserve metadata for the changes
done to the parent subvolume's fs tree, which cannot be mediated in the
normal way via start_transaction. When quota groups (squota or qgroups)
are enabled, this reserves qgroup metadata of type PREALLOC. Once the
operation is associated to a transaction, we convert PREALLOC to
PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing
this lifecycle correctly. They unconditionally converted the PREALLOC to
PERTRANS in a generic cleanup step regardless of errors or whether the
operation was fully associated to a transaction or not. This resulted in
error paths occasionally converting this rsv to PERTRANS without calling
record_root_in_trans successfully, which meant that unless that root got
recorded in the transaction by some other thread, the end of the
transaction would not free that root's PERTRANS, leaking it. Ultimately,
this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount
for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the
following properties:
1. any failure before record_root_in_trans is called successfully
results in freeing the PREALLOC reservation.
2. after record_root_in_trans, we convert to PERTRANS, and now the
transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without
it, generic/269 with squotas enabled at mkfs time would fail in ~5-10
runs on my system. With this patch, it ran successfully 1000 times in a
row. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored. |
| Bruno is an open source IDE for exploring and testing APIs. Prior to 1.39.1, the custom tool-tip components which internally use react-tooltip were setting the content (in this case the Environment name) as raw HTML which then gets injected into DOM on hover. This, combined with loose Content Security Policy restrictions, allowed any valid HTML text containing inline script to get executed on hovering over the respective Environment's name. This vulnerability's attack surface is limited strictly to scenarios where users import collections from untrusted or malicious sources. The exploit requires deliberate action from the user—specifically, downloading and opening an externally provided malicious Bruno or Postman collection export and the user hovers on the environment name. This vulnerability is fixed in 1.39.1. |
| Snipe-IT before 8.1.18 allows XSS. |
| Snipe-IT before 8.1.18 allows unsafe deserialization. |
| SMSEagle before 6.11 allows reflected XSS via a username or contact phone number. |
| A vulnerability classified as problematic was found in WebAssembly wabt 1.0.36. Affected by this vulnerability is the function BinaryReaderInterp::BeginFunctionBody of the file src/interp/binary-reader-interp.cc. The manipulation leads to null pointer dereference. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. |
