| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Airoha Bluetooth audio SDK, there is a possible permission bypass that allows access critical data of RACE protocol through Bluetooth LE GATT service. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Texas Instruments CC2652RB LaunchPad SimpleLink CC13XX CC26XX SDK 7.41.00.17 was discovered to utilize insufficient permission checks on critical fields within Bluetooth Low Energy (BLE) data packets. This issue allows attackers to cause a Denial of Service (DoS) via a crafted LL_Length_Req packet. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: sh-sci: fix RSCI FIFO overrun handling
The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.
For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.
Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.
The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.
Avoid calling sci_getreg() for port types which don't use standard
register handling.
Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.
sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.
------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]--- |
| The SunPower PVS6's BluetoothLE interface is vulnerable due to its use of hardcoded encryption parameters and publicly accessible protocol details. An attacker within Bluetooth range could exploit this vulnerability to gain full access to the device's servicing interface. This access allows the attacker to perform actions such as firmware replacement, disabling power production, modifying grid settings, creating SSH tunnels, altering firewall settings, and manipulating connected devices. |
| Sciener locks' firmware update mechanism do not authenticate or validate firmware updates if passed to the lock through the Bluetooth Low Energy service. A challenge request can be sent to the lock with a command to prepare for an update, rather than an unlock request, allowing an attacker to compromise the device. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition"). |
| Improper input validation in Settings prior to SMR Dec-2024 Release 1 allows local attackers to broadcast signal for discovering Bluetooth on Galaxy Watch. |
| A certain software build for the Sharp Rouvo V device (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys) leaks the Wi-Fi MAC address and the Bluetooth MAC address to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the "ro.boot.wifi_mac" system property to indirectly obtain the Wi-Fi MAC address and reads the "ro.boot.bt_mac" system property to obtain the Bluetooth MAC address. |
| bt_sock_recvmsg in net/bluetooth/af_bluetooth.c in the Linux kernel through 6.6.8 has a use-after-free because of a bt_sock_ioctl race condition. |
| An unauthorised attacker within bluetooth range may use an improper validation during the BLE connection request to deadlock the affected devices. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bcsp: receive data only if registered
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH. |
| In a Bluetooth device, using RS9116-WiseConnect SDK experiences a Denial of Service, if it receives malformed L2CAP packets, only hard reset will bring the device to normal operation |
| An issue was discovered in Lush 2 through 2020-02-25. Due to the lack of Bluetooth traffic encryption, it is possible to hijack an ongoing Bluetooth connection between the Lush 2 and a mobile phone. This allows an attacker to gain full control over the device. |
| A specific flaw exists within the Bluetooth stack of the MIB3 unit. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow when receiving fragmented HCI packets on a channel. An attacker can leverage this vulnerability to bypass the MTU check on a channel with enabled fragmentation. Consequently, this can lead to a buffer overflow in upper layer profiles, which can be used to obtain remote code execution.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| Improper input validation for some Intel(R) Wireless Bluetooth(R) products for Windows before version 23.40 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Multiple authenticated operating system (OS) command injection vulnerabilities exist in Firewalla Box Software
versions before 1.979. A physically close
attacker that is authenticated to the Bluetooth Low-Energy (BTLE) interface can use the network configuration service to inject commands in various configuration parameters including networkConfig.Interface.Phy.Eth0.Extra.PingTestIP, networkConfig.Interface.Phy.Eth0.Extra.DNSTestDomain, and networkConfig.Interface.Phy.Eth0.Gateway6. Additionally, because the configuration can be synced to the Firewalla cloud, the attacker may be able to persist access even after hardware resets and firmware re-flashes. |
| WHILL Model C2 Electric Wheelchairs and Model F Power Chairs do not enforce authentication for Bluetooth connections. An attacker within range can pair with the device and issue movement commands, override speed restrictions, and manipulate configuration profiles without any credentials or user interaction. |
| A vulnerability was reported in version 1.0 of the Bluetooth Transmission Alliance protocol adopted by Motorola Smart Connect Android Application that could allow a nearby attacker within the Bluetooth interaction range to intercept files when transferred to a device not paired in Smart Connect. |
| Certain Cypress (and Broadcom) Wireless Combo chips such as CYW43455, when a 2021-01-26 Bluetooth firmware update is not present, allow a Bluetooth outage via a "Spectra" attack. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: Fix kernel crash when releasing mtk iso interface
When performing reset tests and encountering abnormal card drop issues
that lead to a kernel crash, it is necessary to perform a null check
before releasing resources to avoid attempting to release a null pointer.
<4>[ 29.158070] Hardware name: Google Quigon sku196612/196613 board (DT)
<4>[ 29.158076] Workqueue: hci0 hci_cmd_sync_work [bluetooth]
<4>[ 29.158154] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
<4>[ 29.158162] pc : klist_remove+0x90/0x158
<4>[ 29.158174] lr : klist_remove+0x88/0x158
<4>[ 29.158180] sp : ffffffc0846b3c00
<4>[ 29.158185] pmr_save: 000000e0
<4>[ 29.158188] x29: ffffffc0846b3c30 x28: ffffff80cd31f880 x27: ffffff80c1bdc058
<4>[ 29.158199] x26: dead000000000100 x25: ffffffdbdc624ea3 x24: ffffff80c1bdc4c0
<4>[ 29.158209] x23: ffffffdbdc62a3e6 x22: ffffff80c6c07000 x21: ffffffdbdc829290
<4>[ 29.158219] x20: 0000000000000000 x19: ffffff80cd3e0648 x18: 000000031ec97781
<4>[ 29.158229] x17: ffffff80c1bdc4a8 x16: ffffffdc10576548 x15: ffffff80c1180428
<4>[ 29.158238] x14: 0000000000000000 x13: 000000000000e380 x12: 0000000000000018
<4>[ 29.158248] x11: ffffff80c2a7fd10 x10: 0000000000000000 x9 : 0000000100000000
<4>[ 29.158257] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 : 2d7223ff6364626d
<4>[ 29.158266] x5 : 0000008000000000 x4 : 0000000000000020 x3 : 2e7325006465636e
<4>[ 29.158275] x2 : ffffffdc11afeff8 x1 : 0000000000000000 x0 : ffffffdc11be4d0c
<4>[ 29.158285] Call trace:
<4>[ 29.158290] klist_remove+0x90/0x158
<4>[ 29.158298] device_release_driver_internal+0x20c/0x268
<4>[ 29.158308] device_release_driver+0x1c/0x30
<4>[ 29.158316] usb_driver_release_interface+0x70/0x88
<4>[ 29.158325] btusb_mtk_release_iso_intf+0x68/0xd8 [btusb (HASH:e8b6 5)]
<4>[ 29.158347] btusb_mtk_reset+0x5c/0x480 [btusb (HASH:e8b6 5)]
<4>[ 29.158361] hci_cmd_sync_work+0x10c/0x188 [bluetooth (HASH:a4fa 6)]
<4>[ 29.158430] process_scheduled_works+0x258/0x4e8
<4>[ 29.158441] worker_thread+0x300/0x428
<4>[ 29.158448] kthread+0x108/0x1d0
<4>[ 29.158455] ret_from_fork+0x10/0x20
<0>[ 29.158467] Code: 91343000 940139d1 f9400268 927ff914 (f9401297)
<4>[ 29.158474] ---[ end trace 0000000000000000 ]---
<0>[ 29.167129] Kernel panic - not syncing: Oops: Fatal exception
<2>[ 29.167144] SMP: stopping secondary CPUs
<4>[ 29.167158] ------------[ cut here ]------------ |
