| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: fix null-ptr-deref when device_add_disk() fails
do_rbd_add() publishes the device with device_add() before calling
device_add_disk(). If device_add_disk() fails after device_add()
succeeds, the error path calls rbd_free_disk() directly and then later
falls through to rbd_dev_device_release(), which calls rbd_free_disk()
again. This double teardown can leave blk-mq cleanup operating on
invalid state and trigger a null-ptr-deref in
__blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set().
Fix this by following the normal remove ordering: call device_del()
before rbd_dev_device_release() when device_add_disk() fails after
device_add(). That keeps the teardown sequence consistent and avoids
re-entering disk cleanup through the wrong path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64
guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer
confines failslab injections to the __add_disk() range and injects
fail-nth while mapping an RBD image through
/sys/bus/rbd/add_single_major.
On the unpatched kernel, fail-nth=4 reliably triggered the fault:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240
Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00
RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246
RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4
RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b
R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000
R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004
FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0
PKRU: 55555554
Call Trace:
<TASK>
blk_mq_free_tag_set+0x77/0x460
do_rbd_add+0x1446/0x2b80
? __pfx_do_rbd_add+0x10/0x10
? lock_acquire+0x18c/0x300
? find_held_lock+0x2b/0x80
? sysfs_file_kobj+0xb6/0x1b0
? __pfx_sysfs_kf_write+0x10/0x10
kernfs_fop_write_iter+0x2f4/0x4a0
vfs_write+0x98e/0x1000
? expand_files+0x51f/0x850
? __pfx_vfs_write+0x10/0x10
ksys_write+0xf2/0x1d0
? __pfx_ksys_write+0x10/0x10
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0fbea15907
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907
RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001
RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141
R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058
R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004
</TASK>
With this fix applied, rerunning the reproducer over fail-nth=1..256
yields no KASAN reports.
[ idryomov: rename err_out_device_del -> err_out_device ] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix the out-of-bounds nameoff handling for trailing dirents
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-tdes - fix DMA sync direction
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: validate payload size before accessing journal metadata
r5c_recovery_analyze_meta_block() and
r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a
journal metadata block using on-disk payload size fields without
validating them against the remaining space in the metadata block.
A corrupted journal contains payload sizes extending beyond the PAGE_SIZE
boundary can cause out-of-bounds reads when accessing payload fields or
computing offsets.
Add bounds validation for each payload type to ensure the full payload
fits within meta_size before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
The ibmasm_send_i2o_message() function uses get_dot_command_size() to
compute the byte count for memcpy_toio(), but this value is derived from
user-controlled fields in the dot_command_header (command_size: u8,
data_size: u16) and is never validated against the actual allocation size.
A root user can write a small buffer with inflated header fields, causing
memcpy_toio() to read up to ~65 KB past the end of the allocation into
adjacent kernel heap, which is then forwarded to the service processor
over MMIO.
Silently clamping the copy size is not sufficient: if the header fields
claim a larger size than the buffer, the SP receives a dot command whose
own header is inconsistent with the I2O message length, which can cause
the SP to desynchronize. Reject such commands outright by returning
failure.
Validate command_size before calling get_mfa_inbound() to avoid leaking
an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware
frame from the controller's free pool, and returning without a
corresponding set_mfa_inbound() call would permanently exhaust it.
Additionally, clamp command_size to I2O_COMMAND_SIZE before the
memcpy_toio() so the MMIO write stays within the I2O message frame,
consistent with the clamping already performed by outgoing_message_size()
for the header field. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix integer overflow in run_unpack() volume boundary check
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path. |
| In the Linux kernel, the following vulnerability has been resolved:
bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: bound decode() reads against the compressed packet length
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: reject VJ receive packets on instances with no rstate array
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO
nf_osf_match_one() computes ctx->window % f->wss.val in the
OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A
CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a
subsequent matching TCP SYN divides by zero and panics the kernel.
Reject the bogus fingerprint in nfnl_osf_add_callback() above the
per-option for-loop. f->wss is per-fingerprint, not per-option, so
the check must run regardless of f->opt_num (including 0). Also
reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that
as "should not happen".
Crash:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
<IRQ>
nf_osf_match (net/netfilter/nfnetlink_osf.c:220)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:348)
nf_hook_slow (net/netfilter/core.c:622)
ip_local_deliver (net/ipv4/ip_input.c:265)
ip_rcv (include/linux/skbuff.h:1162)
__netif_receive_skb_one_core (net/core/dev.c:6181)
process_backlog (net/core/dev.c:6642)
__napi_poll (net/core/dev.c:7710)
net_rx_action (net/core/dev.c:7945)
handle_softirqs (kernel/softirq.c:622) |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: cap upcall PID array size and pre-size vport replies
The vport netlink reply helpers allocate a fixed-size skb with
nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID
array via ovs_vport_get_upcall_portids(). Since
ovs_vport_set_upcall_portids() accepts any non-zero multiple of
sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID
array large enough to overflow the reply buffer, causing nla_put() to
fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with
unprivileged user namespaces enabled (e.g., Ubuntu default), this is
reachable via unshare -Urn since OVS vport mutation operations use
GENL_UNS_ADMIN_PERM.
kernel BUG at net/openvswitch/datapath.c:2414!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1
RIP: 0010:ovs_vport_cmd_set+0x34c/0x400
Call Trace:
<TASK>
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116)
genl_rcv_msg (net/netlink/genetlink.c:1194)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject attempts to set more PIDs than nr_cpu_ids in
ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply
size in ovs_vport_cmd_msg_size() based on that bound, similar to the
existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already
used by the per-CPU dispatch configuration on the datapath side
(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the
two sides stay consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()
CO-RE accessor strings are colon-separated indices that describe a path
from a root BTF type to a target field, e.g. "0:1:2" walks through
nested struct members. bpf_core_parse_spec() parses each component with
sscanf("%d"), so negative values like -1 are silently accepted. The
subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the
upper bound and always pass for negative values because C integer
promotion converts the __u16 btf_vlen result to int, making the
comparison (int)(-1) >= (int)(N) false for any positive N.
When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff,
producing an out-of-bounds read far past the members array. A crafted
BPF program with a negative CO-RE accessor on any struct that exists in
vmlinux BTF (e.g. task_struct) crashes the kernel deterministically
during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y
(default on major distributions). The bug is reachable with CAP_BPF:
BUG: unable to handle page fault for address: ffffed11818b6626
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full)
RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354)
RAX: 00000000ffffffff
Call Trace:
<TASK>
bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321)
bpf_core_apply (kernel/bpf/btf.c:9507)
check_core_relo (kernel/bpf/verifier.c:19475)
bpf_check (kernel/bpf/verifier.c:26031)
bpf_prog_load (kernel/bpf/syscall.c:3089)
__sys_bpf (kernel/bpf/syscall.c:6228)
</TASK>
CO-RE accessor indices are inherently non-negative (struct member index,
array element index, or enumerator index), so reject them immediately
after parsing. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix end-of-list detection in cgroup_storage_get_next_key()
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_get_sndtimeo_cb()
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb()
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). |
