| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix unsafe drain work queue code
If create_qp does not fully succeed it is possible for qp cleanup
code to attempt to drain the send or recv work queues before the
queues have been created causing a seg fault. This patch checks
to see if the queues exist before attempting to drain them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
The following call trace was observed:
localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete
localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092
localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291"
localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]
localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1
localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022
localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core]
localhost kernel: Call Trace:
localhost kernel: dump_stack_lvl+0x57/0x7d
localhost kernel: check_preemption_disabled+0xc8/0xd0
localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx]
Use raw_smp_processor_id() instead of smp_processor_id().
Also use queue_work() across the driver instead of queue_work_on() thus
avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix poll request timeout handling
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the
kernel if poll requests timeout triggered, as reported by David. [1]
BUG: kernel NULL pointer dereference, address: 0000000000000008
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:null_timeout_rq+0x4e/0x91
Call Trace:
? null_timeout_rq+0x4e/0x91
blk_mq_handle_expired+0x31/0x4b
bt_iter+0x68/0x84
? bt_tags_iter+0x81/0x81
__sbitmap_for_each_set.constprop.0+0xb0/0xf2
? __blk_mq_complete_request_remote+0xf/0xf
bt_for_each+0x46/0x64
? __blk_mq_complete_request_remote+0xf/0xf
? percpu_ref_get_many+0xc/0x2a
blk_mq_queue_tag_busy_iter+0x14d/0x18e
blk_mq_timeout_work+0x95/0x127
process_one_work+0x185/0x263
worker_thread+0x1b5/0x227
This is indeed a race problem between null_timeout_rq() and null_poll().
null_poll() null_timeout_rq()
spin_lock(&nq->poll_lock)
list_splice_init(&nq->poll_list, &list)
spin_unlock(&nq->poll_lock)
while (!list_empty(&list))
req = list_first_entry()
list_del_init()
...
blk_mq_add_to_batch()
// req->rq_next = NULL
spin_lock(&nq->poll_lock)
// rq->queuelist->next == NULL
list_del_init(&rq->queuelist)
spin_unlock(&nq->poll_lock)
Fix these problems by setting requests state to MQ_RQ_COMPLETE under
nq->poll_lock protection, in which null_timeout_rq() can safely detect
this race and early return.
Note this patch just fix the kernel panic when request timeout happen.
[1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ |
| A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.47.41.0. The vulnerability could potentially allow a local attacker to escalate privileges via an arbitrary file write. |
| Starting from Rust 1.87.0 and before Rust 1.89.0, the tier 3 Cygwin target (`x86_64-pc-cygwin`) didn't correctly handle path separators, causing the standard library's Path API to ignore path components separated by backslashes. Due to this, programs compiled for Cygwin that validate paths could misbehave, potentially allowing path traversal attacks or malicious filesystem operations.
Rust 1.89.0 fixes the issue by handling both Win32 and Unix style paths in the standard library for the Cygwin target.
While we assess the severity of this vulnerability as "medium", please note that the tier 3 Cygwin compilation target is only available when building it from source: no pre-built binaries are distributed by the Rust project, and it cannot be installed through Rustup. Unless you manually compiled the `x86_64-pc-cygwin` target you are not affected by this vulnerability. Users of the tier 1 MinGW target (`x86_64-pc-windows-gnu`) are also explicitly not affected. |
| A vulnerability in the web-based management interface of Cisco Cyber Vision Center could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
To exploit this vulnerability, the attacker must have valid administrative credentials that allow access to the Sensor Explorer page. By default, Admin and Product user roles have this access, as do any custom users that are configued to allow access to the Sensors page. |
| A vulnerability in the web-based management interface of Cisco Cyber Vision Center could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
To exploit this vulnerability, the attacker must have valid administrative credentials that allow access to the Reports page. By default, all pre-defined users have this access, as do any custom users that are configured to allow access to the Reports page. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| In Splunk Enterprise versions below 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.111, 9.3.2408.119, and 9.2.2406.122, a low-privileged user that does not hold the admin or power Splunk roles could access sensitive search results if Splunk Enterprise runs an administrative search job in the background. If the low privileged user guesses the search job’s unique Search ID (SID), the user could retrieve the results of that job, potentially exposing sensitive search results. For more information see https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.0/manage-jobs/about-jobs-and-job-management and https://help.splunk.com/en/splunk-enterprise/search/search-manual/10.0/manage-jobs/manage-search-jobs. |
| In Splunk Enterprise versions below 9.4.4, 9.3.6 and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.109, 9.3.2408.119 and 9.2.2406.122, a low-privileged user that does not hold the 'admin' or 'power' Splunk roles could craft a malicious payload through the `dataset.command` parameter of the `/app/search/table` endpoint, which could result in execution of unauthorized JavaScript code in the browser of a user. |
| In Splunk Enterprise versions below 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.108, 9.3.2408.118 and 9.2.2406.123, a low privileged user that does not hold the admin or power Splunk roles could craft a malicious payload through the error messages and job inspection details of a saved search. This could result in execution of unauthorized JavaScript code in the browser of a user. |
| In Splunk Enterprise versions below 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.108, 9.3.2408.118 and 9.2.2406.123, a low privilege user that does not hold the "admin" or "power" Splunk roles could perform an extensible markup language (XML) external entity (XXE) injection through the dashboard tab label field. The XXE injection has the potential to cause denial of service (DoS) attacks. |
| In Splunk Enterprise versions below 10.0.1, 9.4.4, 9.3.6, and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.108, 9.3.2408.118 and 9.2.2406.123, a user who holds a role that contains the high-privilege capability `change_authentication`, could send multiple LDAP bind requests to a specific internal endpoint, resulting in high server CPU usage, which could potentially lead to a denial of service (DoS) until the Splunk Enterprise instance is restarted. See https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.0/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities and https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.0/use-ldap-as-an-authentication-scheme/configure-ldap-with-splunk-web#cfe47e31_007f_460d_8b3d_8505ffc3f0dd__Configure_LDAP_with_Splunk_Web for more information. |
| In Splunk Enterprise versions below 10.0.1, 9.4.4, 9.3.6 and 9.2.8, and Splunk Cloud Platform versions below 9.3.2411.109, 9.3.2408.119 and 9.2.2406.122, an unauthenticated attacker could trigger a blind server-side request forgery (SSRF) potentially letting an attacker perform REST API calls on behalf of an authenticated high-privileged user. |
| NVIDIA Installer for NvAPP for Windows contains a vulnerability in the FrameviewSDK installation process, where an attacker with local unprivileged access could modify files in the Frameview SDK directory. A successful exploit of this vulnerability might lead to escalation of privileges. |
| In Deciso OPNsense before 25.7.4, when creating an "Interfaces: Devices: Point-to-Point" entry, the value of the parameter ptpid is not sanitized of HTML-related characters/strings. This value is directly displayed when visiting the page/interfaces_assign.php, which can result in stored cross-site scripting. The attacker must be authenticated with at-least "Interfaces: PPPs: Edit" permission. This vulnerability has been addressed by the vendor in the product release notes as "ui: legacy_html_escape_form_data() was not escaping keys only data elements." |
| Cross Site Scripting vulnerability in Neto E-Commerce CMS v.6.313.0 through v.6.3115 allows a remote attacker to escalate privileges via the kw parameter. |
| Stored Cross-Site Scripting (XSS) vulnerability in Issabel v5.0.0, consisting of a stored XSS due to a lack of proper validation of user input, through the 'email' parameter in '/index.php?menu=address_book'. |
| Improper handling of symbolic links in the TeamViewer Full Client and Host for Windows — in versions prior to 15.70 of TeamViewer Remote and Tensor — allows an attacker with local, unprivileged access to a device lacking adequate malware protection to escalate privileges by spoofing the update file path. This may result in unauthorized access to sensitive information. |
| In Frappe ERPNext 15.57.5, the function get_material_requests_based_on_supplier() at erpnext/stock/doctype/material_request/material_request.py is vulnerable to SQL Injection, which allows an attacker to extract all information from databases by injecting a SQL query into the txt parameter. |
