Search vulnerabilities

Results 848

CVE-2026-72285

KVM: TDX: Reject concurrent change to CPUID entry count

In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Reject concurrent change to CPUID entry count Reject KVM_TDX_INIT_VM if userspace changes cpuid.nent between the initial read and the subsequent copy of the initialization data. tdx_td_init() first reads user_data->cpuid.nent to size the flexible kvm_tdx_init_vm copy. The copied structure also contains cpuid.nent, and that field can differ from the value used to size the allocation if userspace modifies the input concurrently. setup_tdparams_cpuids() later passes init_vm->cpuid.nent to kvm_find_cpuid_entry2(), which uses it as the array bound for the copied entries. Require the copied count to match the value used to size the allocation so that CPUID parsing cannot access beyond the entries actually copied.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72300

ASoC: SOF: topology: validate vendor array size before parsing

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72332

accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo()

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo() amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo() callback while holding xdna->dev_lock. The callback may call amdxdna_cmd_submit(), which in turn calls amdxdna_pm_resume_get(). If the device is suspended, amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(), which also acquires xdna->dev_lock, resulting in a deadlock. Avoid the deadlock by calling amdxdna_pm_resume_get() before holding xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl()

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72356

cifs: Fix missing credit release on failure in cifs_issue_read()

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix missing credit release on failure in cifs_issue_read() Fix missing release of credits in the failure path in cifs_issue_read() lest retrying the subreq just overwrites the credits value.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72185

ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock()

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock() When ntfs_map_runlist_nolock() needs to look up the attribute extent containing a target VCN (ctx_needs_reset == true), it calls ntfs_attr_lookup() and then expects the result to be a non-resident attribute, since only non-resident attributes have a mapping pairs array to decompress. A crafted NTFS image can place a resident attribute where a non-resident one is expected, causing ntfs_attr_lookup() to succeed but return a resident attribute record. Previously this was caught only by a WARN_ON(), which does not stop execution. The code then falls through to read a->data.non_resident.highest_vcn from what is actually a resident attribute, accessing the wrong union member and corrupting the VCN range check. The caller path triggering this warning during mount is: ntfs_map_runlist_nolock ntfs_empty_logfile load_system_files ntfs_fill_super In this path ctx is NULL, so ntfs_map_runlist_nolock() allocates a temporary search context internally and sets ctx_needs_reset = true. The existing resident-attribute guard in the ctx != NULL branch already returns -EIO silently for the same condition; make the ctx_needs_reset path consistent by replacing the WARN_ON() with the same -EIO error return. This causes the crafted image to be rejected with a mount error instead of triggering a kernel warning.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72188

ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name()

In the Linux kernel, the following vulnerability has been resolved: ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name() ntfs_lookup_inode_by_name() returns MFT references read from directory index entries on disk. These values are untrusted, but the function can currently return an error-marked MFT reference to its callers without validating it. Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image can set the MREF error bit while leaving the low bits as an arbitrary value, causing callers to consume a bogus pseudo-errno instead of treating the lookup result as corrupted on-disk metadata. Fix this at the source by normalizing every error-marked MFT reference returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to all four directory lookup return paths so every caller gets a validated result without needing additional checks or an API change. This keeps the sanitization in the common lookup helper, which is cleaner than duplicating validation in each caller.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72199

ntfs: validate resident index root values on lookup

In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident index root values on lookup Resident $INDEX_ROOT values carry index header fields that callers consume after lookup. Some callers already validate parts of the layout before walking entries, but those checks are scattered and do not cover all root header invariants, such as entries_offset alignment and lower bound, index_length, and allocated_size consistency. The resident root resize paths now keep these header fields consistent while the value size changes: ntfs_ir_truncate() lowers index.allocated_size before shrinking the resident value, and ntfs_ir_reparent() grows the resident value before publishing a larger root header. Lookup-time validation can therefore cover these invariants without tripping over the driver's own resize paths. Add $INDEX_ROOT to the minimum resident value size table and validate the resident index header fields before returning the attribute from lookup. Require 8-byte aligned index header fields, a sane entries_offset, an index_length within allocated_size, allocated_size within the resident value, and enough entry space for at least an index entry header. The shared validator already rejects non-resident records for resident-only attribute types, including $INDEX_ROOT.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72211

ntfs: grow index root value before reparent header update

In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72422

ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O).

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72208

ntfs: add bounds check before accessing EA entries

In the Linux kernel, the following vulnerability has been resolved: ntfs: add bounds check before accessing EA entries in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough space in the EA entry before accessing the next_entry_offset field of the EA entry.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72207

ntfs: not change 0-byte $DATA attribute to non-resident

In the Linux kernel, the following vulnerability has been resolved: ntfs: not change 0-byte $DATA attribute to non-resident When ntfs_resident_attr_resize() cannot grow a resident attribute in place, it retries after converting other resident attributes to non-resident to free space in the MFT recrord. Do not select zero-length resident $DATA attributes for this conversion. fsck treats 0-byte non-resident $DATA attribute as corruptions.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72202

ntfs: avoid heap allocation for free-cluster readahead state

In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid heap allocation for free-cluster readahead state get_nr_free_clusters() allocates a temporary file_ra_state before it publishes the precomputed free cluster count, sets NVolFreeClusterKnown(), and wakes vol->free_waitq. If that allocation fails, the worker returns without setting the flag or waking waiters, so callers waiting for the free count can block indefinitely. The readahead state is only used synchronously while scanning the bitmap. Keep it on the stack and pass it by address to the readahead helper. This eliminates the early allocation failure path instead of adding a special case that publishes a conservative count and wakes the waitqueue. Zero-initialize the on-stack state because file_ra_state_init() only sets ra_pages and prev_pos. Apply the same treatment to __get_nr_free_mft_records(), which scans the MFT bitmap with the same short-lived readahead state.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72201

ntfs: validate index entries on reading

In the Linux kernel, the following vulnerability has been resolved: ntfs: validate index entries on reading Validate index entries immediately after reading an index root or index block from disk. This eliminates repeated checks in lookup and readdir, and reduce the risk of missing checks in those paths.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68463

mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68473

powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()

In the Linux kernel, the following vulnerability has been resolved: powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address() mask_user_address() incorrectly checks for CONFIG_E500 instead of CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on E500 hardware. Fix the check to use the correct name.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72011

s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()

In the Linux kernel, the following vulnerability has been resolved: s390/diag: Add missing array_index_nospec() call to memtop_get_page_count() 'level' is user space controlled and used to read from an array. Add the missing array_index_nospec() call to prevent speculative execution.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-72038

net: liquidio: fix BAR resource leak on PF number failure

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: fix BAR resource leak on PF number failure If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68455

liveupdate: validate session type before performing operation

In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68457

ksmbd: use opener credentials for FSCTL mutations

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for FSCTL mutations SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB handle but call VFS xattr, fallocate or fileattr helpers with the current ksmbd worker credentials. Those helpers can revalidate inode permissions, ownership and LSM policy independently of the SMB handle access mask. Run each operation with the credentials captured in the target file when the handle was opened. Keep credential handling local to these single-file FSCTLs rather than applying session credentials to the complete IOCTL handler, which also contains handle-less and multi-handle operations.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-68465

mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products