| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: add NULL check in xfrm_update_ae_params
Normally, x->replay_esn and x->preplay_esn should be allocated at
xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the
xfrm_update_ae_params(...) is okay to update them. However, the current
implementation of xfrm_new_ae(...) allows a malicious user to directly
dereference a NULL pointer and crash the kernel like below.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4
RIP: 0010:memcpy_orig+0xad/0x140
Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c
RSP: 0018:ffff888008f57658 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571
RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818
R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000
FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x1e8/0x500
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? _raw_spin_unlock_irqrestore+0x11/0x40
? fixup_exception+0x36/0x460
? _raw_spin_unlock_irqrestore+0x11/0x40
? exc_page_fault+0x5e/0xc0
? asm_exc_page_fault+0x26/0x30
? xfrm_update_ae_params+0xd1/0x260
? memcpy_orig+0xad/0x140
? __pfx__raw_spin_lock_bh+0x10/0x10
xfrm_update_ae_params+0xe7/0x260
xfrm_new_ae+0x298/0x4e0
? __pfx_xfrm_new_ae+0x10/0x10
? __pfx_xfrm_new_ae+0x10/0x10
xfrm_user_rcv_msg+0x25a/0x410
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __alloc_skb+0xcf/0x210
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1c/0x70
? __stack_depot_save+0x39/0x4e0
? __kasan_slab_free+0x10a/0x190
? kmem_cache_free+0x9c/0x340
? netlink_recvmsg+0x23c/0x660
? sock_recvmsg+0xeb/0xf0
? __sys_recvfrom+0x13c/0x1f0
? __x64_sys_recvfrom+0x71/0x90
? do_syscall_64+0x3f/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
? copyout+0x3e/0x50
netlink_rcv_skb+0xd6/0x210
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_sock_has_perm+0x10/0x10
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
xfrm_netlink_rcv+0x44/0x50
netlink_unicast+0x36f/0x4c0
? __pfx_netlink_unicast+0x10/0x10
? netlink_recvmsg+0x500/0x660
netlink_sendmsg+0x3b7/0x700
This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit
adds additional NULL check in xfrm_update_ae_params to fix the NPD. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ucsi_acpi: Increase the command completion timeout
Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command
completion timeout value") increased the timeout from 5 seconds
to 60 seconds due to issues related to alternate mode discovery.
After the alternate mode discovery switch to polled mode
the timeout was reduced, but instead of being set back to
5 seconds it was reduced to 1 second.
This is causing problems when using a Lenovo ThinkPad X1 yoga gen7
connected over Type-C to a LG 27UL850-W (charging DP over Type-C).
When the monitor is already connected at boot the following error
is logged: "PPM init failed (-110)", /sys/class/typec is empty and
on unplugging the NULL pointer deref fixed earlier in this series
happens.
When the monitor is connected after boot the following error
is logged instead: "GET_CONNECTOR_STATUS failed (-110)".
Setting the timeout back to 5 seconds fixes both cases. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix null pointer dereference in tracing_err_log_open()
Fix an issue in function 'tracing_err_log_open'.
The function doesn't call 'seq_open' if the file is opened only with
write permissions, which results in 'file->private_data' being left as null.
If we then use 'lseek' on that opened file, 'seq_lseek' dereferences
'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic.
Writing to this node requires root privileges, therefore this bug
has very little security impact.
Tracefs node: /sys/kernel/tracing/error_log
Example Kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
Call trace:
mutex_lock+0x30/0x110
seq_lseek+0x34/0xb8
__arm64_sys_lseek+0x6c/0xb8
invoke_syscall+0x58/0x13c
el0_svc_common+0xc4/0x10c
do_el0_svc+0x24/0x98
el0_svc+0x24/0x88
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1b4/0x1b8
Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02)
---[ end trace 561d1b49c12cf8a5 ]---
Kernel panic - not syncing: Oops: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fpu: Fix NULL dereference in avx512_status()
Problem
-------
With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status
causes a warning and a NULL pointer dereference.
This is because the AVX-512 timestamp code uses x86_task_fpu() but
doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function
for kernel threads (PF_KTHREAD specifically), making it return NULL.
The point of the warning was to ensure that kernel threads only access
task->fpu after going through kernel_fpu_begin()/_end(). Note: all
kernel tasks exposed in /proc have a valid task->fpu.
Solution
--------
One option is to silence the warning and check for NULL from
x86_task_fpu(). However, that warning is fairly fresh and seems like a
defense against misuse of the FPU state in kernel threads.
Instead, stop outputting AVX-512_elapsed_ms for kernel threads
altogether. The data was garbage anyway because avx512_timestamp is
only updated for user threads, not kernel threads.
If anyone ever wants to track kernel thread AVX-512 use, they can come
back later and do it properly, separate from this bug fix.
[ dhansen: mostly rewrite changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix NULL pointer dereference in l3mdev_l3_rcv
When delete l3s ipvlan:
ip link del link eth0 ipvlan1 type ipvlan mode l3s
This may cause a null pointer dereference:
Call trace:
ip_rcv_finish+0x48/0xd0
ip_rcv+0x5c/0x100
__netif_receive_skb_one_core+0x64/0xb0
__netif_receive_skb+0x20/0x80
process_backlog+0xb4/0x204
napi_poll+0xe8/0x294
net_rx_action+0xd8/0x22c
__do_softirq+0x12c/0x354
This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after
ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process
like this:
(CPU1) | (CPU2)
l3mdev_l3_rcv() |
check dev->priv_flags: |
master = skb->dev; |
|
| ipvlan_l3s_unregister()
| set dev->priv_flags
| dev->l3mdev_ops = NULL;
|
visit master->l3mdev_ops |
To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: improve shutdown sequence
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b31f
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up). |
| A bug in the filesystem traversal fallback path causes fs/diriterate/diriterate.go:Next() to overindex an empty slice when ReadDir returns nil for an empty directory, resulting in a panic (index out of range) and an application crash (denial of service) in OSV-SCALIBR. |
| glib-networking's OpenSSL backend fails to properly check the return value of memory allocation routines. An out of memory condition could potentially result in writing to an invalid memory location. |
| A denial-of-service vulnerability has been identified in the libsoup HTTP client library. This flaw can be triggered when a libsoup client receives a 401 (Unauthorized) HTTP response containing a specifically crafted domain parameter within the WWW-Authenticate header. Processing this malformed header can lead to a crash of the client application using libsoup. An attacker could exploit this by setting up a malicious HTTP server. If a user's application using the vulnerable libsoup library connects to this malicious server, it could result in a denial-of-service. Successful exploitation requires tricking a user's client application into connecting to the attacker's malicious server. |
| A null pointer dereference vulnerability was found in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() in drivers/net/wireless/ath/ath10k/wmi-tlv.c in the Linux kernel. This issue could be exploited to trigger a denial of service. |
| A null pointer dereference vulnerability was found in dpll_pin_parent_pin_set() in drivers/dpll/dpll_netlink.c in the Digital Phase Locked Loop (DPLL) subsystem in the Linux kernel. This issue could be exploited to trigger a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-gpu: fix a missing check to avoid NULL dereference
'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset()
and it will lead to a NULL dereference by a lately use of it
(i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check.
[ kraxel: minor codestyle fixup ] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
The list_first_entry() macro never returns NULL. If the list is
empty then it returns an invalid pointer. Use list_first_entry_or_null()
to check if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: revisit driver bind/unbind and callbacks
In the SoundWire probe, we store a pointer from the driver ops into
the 'slave' structure. This can lead to kernel oopses when unbinding
codec drivers, e.g. with the following sequence to remove machine
driver and codec driver.
/sbin/modprobe -r snd_soc_sof_sdw
/sbin/modprobe -r snd_soc_rt711
The full details can be found in the BugLink below, for reference the
two following examples show different cases of driver ops/callbacks
being invoked after the driver .remove().
kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150
kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence]
kernel: RIP: 0010:mutex_lock+0x19/0x30
kernel: Call Trace:
kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae]
kernel: ? newidle_balance+0x26a/0x400
kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: BUG: unable to handle page fault for address: ffffffffc07654c8
kernel: Workqueue: pm pm_runtime_work
kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus]
kernel: Call Trace:
kernel: <TASK>
kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82]
kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd]
kernel: ? dpm_sysfs_remove+0x60/0x60
This was not detected earlier in Intel tests since the tests first
remove the parent PCI device and shut down the bus. The sequence
above is a corner case which keeps the bus operational but without a
driver bound.
While trying to solve this kernel oopses, it became clear that the
existing SoundWire bus does not deal well with the unbind case.
Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields")
added a 'probed' status variable and a 'probe_complete'
struct completion. This status is however not reset on remove and
likewise the 'probe complete' is not re-initialized, so the
bind/unbind/bind test cases would fail. The timeout used before the
'update_status' callback was also a bad idea in hindsight, there
should really be no timing assumption as to if and when a driver is
bound to a device.
An initial draft was based on device_lock() and device_unlock() was
tested. This proved too complicated, with deadlocks created during the
suspend-resume sequences, which also use the same device_lock/unlock()
as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS
caused spurious resumes and the use of device_lock() caused hangs
during suspend. After multiple weeks or testing and painful
reverse-engineering of deadlocks on different devices, we looked for
alternatives that did not interfere with the device core.
A bus notifier was used successfully to keep track of DRIVER_BOUND and
DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests,
but it can still be defeated with a theoretical corner case where the
memory is freed by a .remove while the callback is in use. The
notifier only helps make sure the driver callbacks are valid, but not
that the memory allocated in probe remains valid while the callbacks
are invoked.
This patch suggests the introduction of a new 'sdw_dev_lock' mutex
protecting probe/remove and all driver callbacks. Since this mutex is
'local' to SoundWire only, it does not interfere with existing locks
and does not create deadlocks. In addition, this patch removes the
'probe_complete' completion, instead we directly invoke the
'update_status' from the probe routine. That removes any sort of
timing dependency and a much better support for the device/driver
model, the driver could be bound before the bus started, or eons after
the bus started and the hardware would be properly initialized in all
cases.
BugLink: https://github.com/thesofproject/linux/is
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sf-pdma: Add multithread support for a DMA channel
When we get a DMA channel and try to use it in multiple threads it
will cause oops and hanging the system.
% echo 64 > /sys/module/dmatest/parameters/threads_per_chan
% echo 10000 > /sys/module/dmatest/parameters/iterations
% echo 1 > /sys/module/dmatest/parameters/run
[ 89.480664] Unable to handle kernel NULL pointer dereference at virtual
address 00000000000000a0
[ 89.488725] Oops [#1]
[ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted
5.17.0-rc5
[ 89.509385] epc : vchan_find_desc+0x32/0x46
[ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6
This happens because of data race. Each thread rewrite channels's
descriptor as soon as device_prep_dma_memcpy() is called. It leads to the
situation when the driver thinks that it uses right descriptor that
actually is freed or substituted for other one.
With current fixes a descriptor changes its value only when it has
been used. A new descriptor is acquired from vc->desc_issued queue that
is already filled with descriptors that are ready to be sent. Threads
have no direct access to DMA channel descriptor. Now it is just possible
to queue a descriptor for further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: avoid panic on init failure
In case of an error during init, in_hw_restart will be set, but it will
never get cleared.
Instead, we will retry to init again, and then we will act like we are in a
restart when we are actually not.
This causes (among others) to a NULL pointer dereference when canceling
rx_omi::finished_work, that was not even initialized, because we thought
that we are in hw_restart.
Set in_hw_restart to true only if the fw is running, then we know that
FW was loaded successfully and we are not going to the retry loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: Fix napi rx poll issue
When driver handles the napi rx polling requests, the netdev might
have been released by the dellink logic triggered by the disconnect
operation on user plane. However, in the logic of processing skb in
polling, an invalid netdev is still being used, which causes a panic.
BUG: kernel NULL pointer dereference, address: 00000000000000f1
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:dev_gro_receive+0x3a/0x620
[...]
Call Trace:
<IRQ>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x4f/0xa0
? asm_exc_page_fault+0x22/0x30
? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)]
? dev_gro_receive+0x3a/0x620
napi_gro_receive+0xad/0x170
t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)]
t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)]
net_rx_action+0x103/0x470
irq_exit_rcu+0x13a/0x310
sysvec_apic_timer_interrupt+0x56/0x90
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/connector: only call HDMI audio helper plugged cb if non-null
On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb
with NULL as the callback function and codec_dev, as seen in its
hdmi_remove function.
The HDMI audio helper then happily tries calling said null function
pointer, and produces an Oops as a result.
Fix this by only executing the callback if fn is non-null. This means
the .plugged_cb and .plugged_cb_dev members still get appropriately
cleared. |
| A flaw was found in the 389-ds-base LDAP Server. This issue occurs when issuing a Modify DN LDAP operation through the ldap protocol, when the function return value is not tested and a NULL pointer is dereferenced. If a privileged user performs a ldap MODDN operation after a failed operation, it could lead to a Denial of Service (DoS) or system crash. |
