| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds in parse_sec_desc()
If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd
struct size. If it is smaller, It could cause slab-out-of-bounds.
And when validating sid, It need to check it included subauth array size. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_lock
If smb_lock->zero_len has value, ->llist of smb_lock is not delete and
flock is old one. It will cause use-after-free on error handling
routine. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: abort vma_modify() on merge out of memory failure
The remainder of vma_modify() relies upon the vmg state remaining pristine
after a merge attempt.
Usually this is the case, however in the one edge case scenario of a merge
attempt failing not due to the specified range being unmergeable, but
rather due to an out of memory error arising when attempting to commit the
merge, this assumption becomes untrue.
This results in vmg->start, end being modified, and thus the proceeding
attempts to split the VMA will be done with invalid start/end values.
Thankfully, it is likely practically impossible for us to hit this in
reality, as it would require a maple tree node pre-allocation failure that
would likely never happen due to it being 'too small to fail', i.e. the
kernel would simply keep retrying reclaim until it succeeded.
However, this scenario remains theoretically possible, and what we are
doing here is wrong so we must correct it.
The safest option is, when this scenario occurs, to simply give up the
operation. If we cannot allocate memory to merge, then we cannot allocate
memory to split either (perhaps moreso!).
Any scenario where this would be happening would be under very extreme
(likely fatal) memory pressure, so it's best we give up early.
So there is no doubt it is appropriate to simply bail out in this
scenario.
However, in general we must if at all possible never assume VMG state is
stable after a merge attempt, since merge operations update VMG fields.
As a result, additionally also make this clear by storing start, end in
local variables.
The issue was reported originally by syzkaller, and by Brad Spengler (via
an off-list discussion), and in both instances it manifested as a
triggering of the assert:
VM_WARN_ON_VMG(start >= end, vmg);
In vma_merge_existing_range().
It seems at least one scenario in which this is occurring is one in which
the merge being attempted is due to an madvise() across multiple VMAs
which looks like this:
start end
|<------>|
|----------|------|
| vma | next |
|----------|------|
When madvise_walk_vmas() is invoked, we first find vma in the above
(determining prev to be equal to vma as we are offset into vma), and then
enter the loop.
We determine the end of vma that forms part of the range we are
madvise()'ing by setting 'tmp' to this value:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
We then invoke the madvise() operation via visit(), letting prev get
updated to point to vma as part of the operation:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where the visit() function pointer in this instance is
madvise_vma_behavior().
As observed in syzkaller reports, it is ultimately madvise_update_vma()
that is invoked, calling vma_modify_flags_name() and vma_modify() in turn.
Then, in vma_modify(), we attempt the merge:
merged = vma_merge_existing_range(vmg);
if (merged)
return merged;
We invoke this with vmg->start, end set to start, tmp as such:
start tmp
|<--->|
|----------|------|
| vma | next |
|----------|------|
We find ourselves in the merge right scenario, but the one in which we
cannot remove the middle (we are offset into vma).
Here we have a special case where vmg->start, end get set to perhaps
unintuitive values - we intended to shrink the middle VMA and expand the
next.
This means vmg->start, end are set to... vma->vm_start, start.
Now the commit_merge() fails, and vmg->start, end are left like this.
This means we return to the rest of vma_modify() with vmg->start, end
(here denoted as start', end') set as:
start' end'
|<-->|
|----------|------|
| vma | next |
|----------|------|
So we now erroneously try to split accordingly. This is where the
unfortunate
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
cdx: Fix possible UAF error in driver_override_show()
Fixed a possible UAF problem in driver_override_show() in drivers/cdx/cdx.c
This function driver_override_show() is part of DEVICE_ATTR_RW, which
includes both driver_override_show() and driver_override_store().
These functions can be executed concurrently in sysfs.
The driver_override_store() function uses driver_set_override() to
update the driver_override value, and driver_set_override() internally
locks the device (device_lock(dev)). If driver_override_show() reads
cdx_dev->driver_override without locking, it could potentially access
a freed pointer if driver_override_store() frees the string
concurrently. This could lead to printing a kernel address, which is a
security risk since DEVICE_ATTR can be read by all users.
Additionally, a similar pattern is used in drivers/amba/bus.c, as well
as many other bus drivers, where device_lock() is taken in the show
function, and it has been working without issues.
This potential bug was detected by our experimental static analysis
tool, which analyzes locking APIs and paired functions to identify
data races and atomicity violations. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add sanity checks on rdev validity
There is a possibility that ulp_irq_stop and ulp_irq_start
callbacks will be called when the device is in detached state.
This can cause a crash due to NULL pointer dereference as
the rdev is already freed. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
If the file is sillyrenamed, and slated for delete on close, it is
possible for a server reboot to triggeer an open reclaim, with can again
race with the application call to close(). When that happens, the call
to put_nfs_open_context() can trigger a synchronous delegreturn call
which deadlocks because it is not marked as privileged.
Instead, ensure that the call to nfs4_inode_return_delegation_on_close()
catches the delegreturn, and schedules it asynchronously. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix vport QoS cleanup on error
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: allow small head cache usage with large MAX_SKB_FRAGS values
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Don't reference skb after sending to VIOS
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix softlockup in arena_map_free on 64k page kernel
On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y,
arena_htab tests cause a segmentation fault and soft lockup.
The same failure is not observed with 4k pages on aarch64.
It turns out arena_map_free() is calling
apply_to_existing_page_range() with the address returned by
bpf_arena_get_kern_vm_start(). If this address is not page-aligned
the code ends up calling apply_to_pte_range() with that unaligned
address causing soft lockup.
Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the
division by 2 in bpf_arena_get_kern_vm_start() returns
a page-aligned value. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: Fix crash when a namespace is disabled
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
amdkfd: properly free gang_ctx_bo when failed to init user queue
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
The Call Trace is as below:
"
<TASK>
? show_regs.cold+0x1a/0x1f
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __warn+0x84/0xd0
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? report_bug+0x105/0x180
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __rxe_cleanup+0x124/0x170 [rdma_rxe]
rxe_destroy_qp.cold+0x24/0x29 [rdma_rxe]
ib_destroy_qp_user+0x118/0x190 [ib_core]
rdma_destroy_qp.cold+0x43/0x5e [rdma_cm]
rtrs_cq_qp_destroy.cold+0x1d/0x2b [rtrs_core]
rtrs_srv_close_work.cold+0x1b/0x31 [rtrs_server]
process_one_work+0x21d/0x3f0
worker_thread+0x4a/0x3c0
? process_one_work+0x3f0/0x3f0
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
"
When too many rdma resources are allocated, rxe needs more time to
handle these rdma resources. Sometimes with the current timeout, rxe
can not release the rdma resources correctly.
Compared with other rdma drivers, a bigger timeout is used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't flush non-uploaded STAs
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Drop unmanaged ELP metric worker
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix peer hash locking vs RCU callback
In its address list, afs now retains pointers to and refs on one or more
rxrpc_peer objects. The address list is freed under RCU and at this time,
it puts the refs on those peers.
Now, when an rxrpc_peer object runs out of refs, it gets removed from the
peer hash table and, for that, rxrpc has to take a spinlock. However, it
is now being called from afs's RCU cleanup, which takes place in BH
context - but it is just taking an ordinary spinlock.
The put may also be called from non-BH context, and so there exists the
possibility of deadlock if the BH-based RCU cleanup happens whilst the hash
spinlock is held. This led to the attached lockdep complaint.
Fix this by changing spinlocks of rxnet->peer_hash_lock back to
BH-disabling locks.
================================
WARNING: inconsistent lock state
6.13.0-rc5-build2+ #1223 Tainted: G E
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/1/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810babe228 (&rxnet->peer_hash_lock){+.?.}-{3:3}, at: rxrpc_put_peer+0xcb/0x180
{SOFTIRQ-ON-W} state was registered at:
mark_usage+0x164/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_peer_keepalive_worker+0x144/0x440
process_one_work+0x486/0x7c0
process_scheduled_works+0x73/0x90
worker_thread+0x1c8/0x2a0
kthread+0x19b/0x1b0
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
irq event stamp: 972402
hardirqs last enabled at (972402): [<ffffffff8244360e>] _raw_spin_unlock_irqrestore+0x2e/0x50
hardirqs last disabled at (972401): [<ffffffff82443328>] _raw_spin_lock_irqsave+0x18/0x60
softirqs last enabled at (972300): [<ffffffff810ffbbe>] handle_softirqs+0x3ee/0x430
softirqs last disabled at (972313): [<ffffffff810ffc54>] __irq_exit_rcu+0x44/0x110
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rxnet->peer_hash_lock);
<Interrupt>
lock(&rxnet->peer_hash_lock);
*** DEADLOCK ***
1 lock held by swapper/1/0:
#0: ffffffff83576be0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire+0x7/0x30
stack backtrace:
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G E 6.13.0-rc5-build2+ #1223
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x57/0x80
print_usage_bug.part.0+0x227/0x240
valid_state+0x53/0x70
mark_lock_irq+0xa5/0x2f0
mark_lock+0xf7/0x170
mark_usage+0xe1/0x180
__lock_acquire+0x544/0x990
lock_acquire.part.0+0x103/0x280
_raw_spin_lock+0x2f/0x40
rxrpc_put_peer+0xcb/0x180
afs_free_addrlist+0x46/0x90 [kafs]
rcu_do_batch+0x2d2/0x640
rcu_core+0x2f7/0x350
handle_softirqs+0x1ee/0x430
__irq_exit_rcu+0x44/0x110
irq_exit_rcu+0xa/0x30
sysvec_apic_timer_interrupt+0x7f/0xa0
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: Add missing deinit() call
A warning is triggered when repeatedly connecting and disconnecting the
rnbd:
list_add corruption. prev->next should be next (ffff88800b13e480), but was ffff88801ecd1338. (prev=ffff88801ecd1340).
WARNING: CPU: 1 PID: 36562 at lib/list_debug.c:32 __list_add_valid_or_report+0x7f/0xa0
Workqueue: ib_cm cm_work_handler [ib_cm]
RIP: 0010:__list_add_valid_or_report+0x7f/0xa0
? __list_add_valid_or_report+0x7f/0xa0
ib_register_event_handler+0x65/0x93 [ib_core]
rtrs_srv_ib_dev_init+0x29/0x30 [rtrs_server]
rtrs_ib_dev_find_or_add+0x124/0x1d0 [rtrs_core]
__alloc_path+0x46c/0x680 [rtrs_server]
? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server]
? rcu_is_watching+0xd/0x40
? __mutex_lock+0x312/0xcf0
? get_or_create_srv+0xad/0x310 [rtrs_server]
? rtrs_rdma_connect+0xa6/0x2d0 [rtrs_server]
rtrs_rdma_connect+0x23c/0x2d0 [rtrs_server]
? __lock_release+0x1b1/0x2d0
cma_cm_event_handler+0x4a/0x1a0 [rdma_cm]
cma_ib_req_handler+0x3a0/0x7e0 [rdma_cm]
cm_process_work+0x28/0x1a0 [ib_cm]
? _raw_spin_unlock_irq+0x2f/0x50
cm_req_handler+0x618/0xa60 [ib_cm]
cm_work_handler+0x71/0x520 [ib_cm]
Commit 667db86bcbe8 ("RDMA/rtrs: Register ib event handler") introduced a
new element .deinit but never used it at all. Fix it by invoking the
`deinit()` to appropriately unregister the IB event handler. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: rcar-ep: Fix incorrect variable used when calling devm_request_mem_region()
The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region()
macro to request a needed resource. A string variable that lives on the
stack is then used to store a dynamically computed resource name, which
is then passed on as one of the macro arguments. This can lead to
undefined behavior.
Depending on the current contents of the memory, the manifestations of
errors may vary. One possible output may be as follows:
$ cat /proc/iomem
30000000-37ffffff :
38000000-3fffffff :
Sometimes, garbage may appear after the colon.
In very rare cases, if no NULL-terminator is found in memory, the system
might crash because the string iterator will overrun which can lead to
access of unmapped memory above the stack.
Thus, fix this by replacing outbound_name with the name of the previously
requested resource. With the changes applied, the output will be as
follows:
$ cat /proc/iomem
30000000-37ffffff : memory2
38000000-3fffffff : memory3
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device. |
