| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds read vulnerability exists in the EMF functionality of PDF-XChange Editor version 10.5.2.395. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. |
| An issue was discovered in Artifex Ghostscript before 10.05.0. The BJ10V device has a Print buffer overflow in contrib/japanese/gdev10v.c. |
| An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs when converting glyphs to Unicode in psi/zbfont.c. |
| An issue was discovered in Artifex Ghostscript before 10.05.0. The NPDL device has a Compression buffer overflow for contrib/japanese/gdevnpdl.c. |
| An issue was discovered in Artifex Ghostscript before 10.05.0. The DOCXWRITE TXTWRITE device has a text buffer overflow via long characters to devices/vector/doc_common.c. |
| An issue was discovered in Artifex Ghostscript before 10.05.0. A buffer overflow occurs during serialization of DollarBlend in a font, for base/write_t1.c and psi/zfapi.c. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate l_tree_depth to avoid out-of-bounds access
The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.
Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix geneve_opt length integer overflow
struct geneve_opt uses 5 bit length for each single option, which
means every vary size option should be smaller than 128 bytes.
However, all current related Netlink policies cannot promise this
length condition and the attacker can exploit a exact 128-byte size
option to *fake* a zero length option and confuse the parsing logic,
further achieve heap out-of-bounds read.
One example crash log is like below:
[ 3.905425] ==================================================================
[ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0
[ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177
[ 3.906646]
[ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1
[ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 3.907784] Call Trace:
[ 3.907925] <TASK>
[ 3.908048] dump_stack_lvl+0x44/0x5c
[ 3.908258] print_report+0x184/0x4be
[ 3.909151] kasan_report+0xc5/0x100
[ 3.909539] kasan_check_range+0xf3/0x1a0
[ 3.909794] memcpy+0x1f/0x60
[ 3.909968] nla_put+0xa9/0xe0
[ 3.910147] tunnel_key_dump+0x945/0xba0
[ 3.911536] tcf_action_dump_1+0x1c1/0x340
[ 3.912436] tcf_action_dump+0x101/0x180
[ 3.912689] tcf_exts_dump+0x164/0x1e0
[ 3.912905] fw_dump+0x18b/0x2d0
[ 3.913483] tcf_fill_node+0x2ee/0x460
[ 3.914778] tfilter_notify+0xf4/0x180
[ 3.915208] tc_new_tfilter+0xd51/0x10d0
[ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560
[ 3.919118] netlink_rcv_skb+0xcd/0x200
[ 3.919787] netlink_unicast+0x395/0x530
[ 3.921032] netlink_sendmsg+0x3d0/0x6d0
[ 3.921987] __sock_sendmsg+0x99/0xa0
[ 3.922220] __sys_sendto+0x1b7/0x240
[ 3.922682] __x64_sys_sendto+0x72/0x90
[ 3.922906] do_syscall_64+0x5e/0x90
[ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 3.924122] RIP: 0033:0x7e83eab84407
[ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
[ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407
[ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003
[ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c
[ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0
[ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8
Fix these issues by enforing correct length condition in related
policies. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate zero num_subauth before sub_auth is accessed
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes
Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.
According to Documentation/admin-guide/mm/numaperf.rst:
"Some memory may share the same node as a CPU, and others are provided as
memory only nodes."
Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".
On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
index that is 1 out of bounds
This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.
When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:
UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
index 512 is out of range for type 'unsigned long[512]'
[...]
Call Trace:
dump_stack
__ubsan_handle_out_of_bounds
load_microcode_amd
request_microcode_amd
reload_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.
[ bp: Massage commit message, fix typo. ] |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: enforce underlying device type
Currently, VLAN devices can be created on top of non-ethernet devices.
Besides the fact that it doesn't make much sense, this also causes a
bug which leaks the address of a kernel function to usermode.
When creating a VLAN device, we initialize GARP (garp_init_applicant)
and MRP (mrp_init_applicant) for the underlying device.
As part of the initialization process, we add the multicast address of
each applicant to the underlying device, by calling dev_mc_add.
__dev_mc_add uses dev->addr_len to determine the length of the new
multicast address.
This causes an out-of-bounds read if dev->addr_len is greater than 6,
since the multicast addresses provided by GARP and MRP are only 6
bytes long.
This behaviour can be reproduced using the following commands:
ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo
ip l set up dev gretest
ip link add link gretest name vlantest type vlan id 100
Then, the following command will display the address of garp_pdu_rcv:
ip maddr show | grep 01:80:c2:00:00:21
Fix the bug by enforcing the type of the underlying device during VLAN
device initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: limit printed string from FW file
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have. |
| The various bson_append functions in the MongoDB C driver library may be susceptible to buffer overflow when performing operations that could result in a final BSON document which exceeds the maximum allowable size (INT32_MAX), resulting in a segmentation fault and possible application crash. This issue affected libbson versions prior to 1.27.5, MongoDB Server v8.0 versions prior to 8.0.1 and MongoDB Server v7.0 versions prior to 7.0.16 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: socinfo: Avoid out of bounds read of serial number
On MSM8916 devices, the serial number exposed in sysfs is constant and does
not change across individual devices. It's always:
db410c:/sys/devices/soc0$ cat serial_number
2644893864
The firmware used on MSM8916 exposes SOCINFO_VERSION(0, 8), which does not
have support for the serial_num field in the socinfo struct. There is an
existing check to avoid exposing the serial number in that case, but it's
not correct: When checking the item_size returned by SMEM, we need to make
sure the *end* of the serial_num is within bounds, instead of comparing
with the *start* offset. The serial_number currently exposed on MSM8916
devices is just an out of bounds read of whatever comes after the socinfo
struct in SMEM.
Fix this by changing offsetof() to offsetofend(), so that the size of the
field is also taken into account. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: add index check to assert to avoid buffer overflow in _read_freq()
Pass the freq index to the assert function to make sure
we do not read a freq out of the opp->rates[] table when called
from the indexed variants:
dev_pm_opp_find_freq_exact_indexed() or
dev_pm_opp_find_freq_ceil/floor_indexed().
Add a secondary parameter to the assert function, unused
for assert_single_clk() then add assert_clk_index() which
will check for the clock index when called from the _indexed()
find functions. |
| libpoppler.so in Poppler through 24.12.0 has an out-of-bounds read vulnerability within the JBIG2Bitmap::combine function in JBIG2Stream.cc. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Stop amdgpu_dm initialize when link nums greater than max_links
[Why]
Coverity report OVERRUN warning. There are
only max_links elements within dc->links. link
count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31.
[How]
Make sure link count less than max_links. |
| A stack based buffer overflow vulnerability is present in OpenPrinting ippusbxd 1.34. A specially configured printer that supports IPP-over-USB can cause a buffer overflow which can lead to a arbitrary code execution in a privileged service. To trigger the vulnerability, a malicious device would need to be connected to the vulnerable system over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
of: module: add buffer overflow check in of_modalias()
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char). |
