| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
rm-raid devices will occasionally trigger the following warning when
being resumed after a table load because DM_RECOVERY_RUNNING is set:
WARNING: CPU: 7 PID: 5660 at drivers/md/dm-raid.c:4105 raid_resume+0xee/0x100 [dm_raid]
The failing check is:
WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery));
This check is designed to make sure that the sync thread isn't
registered, but md_check_recovery can set MD_RECOVERY_RUNNING without
the sync_thread ever getting registered. Instead of checking if
MD_RECOVERY_RUNNING is set, check if sync_thread is non-NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Revise lpfc_prep_embed_io routine with proper endian macro usages
On big endian architectures, it is possible to run into a memory out of
bounds pointer dereference when FCP targets are zoned.
In lpfc_prep_embed_io, the memcpy(ptr, fcp_cmnd, sgl->sge_len) is
referencing a little endian formatted sgl->sge_len value. So, the memcpy
can cause big endian systems to crash.
Redefine the *sgl ptr as a struct sli4_sge_le to make it clear that we are
referring to a little endian formatted data structure. And, update the
routine with proper le32_to_cpu macro usages. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Fix lockless walks with static and dynamic page-table folding
Lina reports random oopsen originating from the fast GUP code when
16K pages are used with 4-level page-tables, the fourth level being
folded at runtime due to lack of LPA2.
In this configuration, the generic implementation of
p4d_offset_lockless() will return a 'p4d_t *' corresponding to the
'pgd_t' allocated on the stack of the caller, gup_fast_pgd_range().
This is normally fine, but when the fourth level of page-table is folded
at runtime, pud_offset_lockless() will offset from the address of the
'p4d_t' to calculate the address of the PUD in the same page-table page.
This results in a stray stack read when the 'p4d_t' has been allocated
on the stack and can send the walker into the weeds.
Fix the problem by providing our own definition of p4d_offset_lockless()
when CONFIG_PGTABLE_LEVELS <= 4 which returns the real page-table
pointer rather than the address of the local stack variable. |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-pxp: Fix ERR_PTR dereference in pxp_probe()
devm_regmap_init_mmio() can fail, add a check and bail out in case of
error. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix race in z_erofs_get_gbuf()
In z_erofs_get_gbuf(), the current task may be migrated to another
CPU between `z_erofs_gbuf_id()` and `spin_lock(&gbuf->lock)`.
Therefore, z_erofs_put_gbuf() will trigger the following issue
which was found by stress test:
<2>[772156.434168] kernel BUG at fs/erofs/zutil.c:58!
..
<4>[772156.435007]
<4>[772156.439237] CPU: 0 PID: 3078 Comm: stress Kdump: loaded Tainted: G E 6.10.0-rc7+ #2
<4>[772156.439239] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 1.0.0 01/01/2017
<4>[772156.439241] pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
<4>[772156.439243] pc : z_erofs_put_gbuf+0x64/0x70 [erofs]
<4>[772156.439252] lr : z_erofs_lz4_decompress+0x600/0x6a0 [erofs]
..
<6>[772156.445958] stress (3127): drop_caches: 1
<4>[772156.446120] Call trace:
<4>[772156.446121] z_erofs_put_gbuf+0x64/0x70 [erofs]
<4>[772156.446761] z_erofs_lz4_decompress+0x600/0x6a0 [erofs]
<4>[772156.446897] z_erofs_decompress_queue+0x740/0xa10 [erofs]
<4>[772156.447036] z_erofs_runqueue+0x428/0x8c0 [erofs]
<4>[772156.447160] z_erofs_readahead+0x224/0x390 [erofs]
.. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Fix error code in drm_client_buffer_vmap_local()
This function accidentally returns zero/success on the failure path.
It leads to locking issues and an uninitialized *map_copy in the
caller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not return negative stream id for array
[WHY]
resource_stream_to_stream_idx returns an array index and it return -1
when not found; however, -1 is not a valid array index number.
[HOW]
When this happens, call ASSERT(), and return a zero instead.
This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: an30259a: Use devm_mutex_init() for mutex initialization
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make cow_file_range_inline() honor locked_page on error
The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:
BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure
BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction.
BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure
assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:871!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted
6.10.0-syzkaller-05505-gb1bc554e009e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 06/27/2024
RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871
Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d
0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8
6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89
RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246
RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc
R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001
R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__extent_writepage fs/btrfs/extent_io.c:1597 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline]
btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373
do_writepages+0x359/0x870 mm/page-writeback.c:2656
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
__filemap_fdatawrite mm/filemap.c:436 [inline]
filemap_flush+0xdf/0x130 mm/filemap.c:463
btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:222
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:877
do_group_exit+0x207/0x2c0 kernel/exit.c:1026
__do_sys_exit_group kernel/exit.c:1037 [inline]
__se_sys_exit_group kernel/exit.c:1035 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035
x64_sys_call+0x2634/0x2640
arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f075b70c9
Code: Unable to access opcode bytes at
0x7f5f075b709f.
I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.
I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:
folio_unlock+5
__process_pages_contig+475
cow_file_range_inline.constprop.0+230
cow_file_range+803
btrfs_run_delalloc_range+566
writepage_delalloc+332
__extent_writepage # inlined in my stacktrace, but I added it here
extent_write_cache_pages+622
Looking at the bisected-to pa
---truncated--- |
| Certain files with overly permissive permissions were identified in the out-of-support Control-M/Agent versions 9.0.18 to 9.0.20 and potentially earlier unsupported versions as well as in newer versions which were upgraded from an affected version. These files contain keys and passwords relating to SSL files, keystore and policies. An attacker with local access to the system running the Agent can access these files. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: ssh_css: Fix a null-pointer dereference in load_video_binaries
The allocation failure of mycs->yuv_scaler_binary in load_video_binaries()
is followed with a dereference of mycs->yuv_scaler_binary after the
following call chain:
sh_css_pipe_load_binaries()
|-> load_video_binaries(mycs->yuv_scaler_binary == NULL)
|
|-> sh_css_pipe_unload_binaries()
|-> unload_video_binaries()
In unload_video_binaries(), it calls to ia_css_binary_unload with argument
&pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the
same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer
dereference is triggered. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: do not accept ACK of bytes we never sent
This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.
ACK seq validation is currently following RFC 5961 5.2 guidelines:
The ACK value is considered acceptable only if
it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
SND.NXT). All incoming segments whose ACK value doesn't satisfy the
above condition MUST be discarded and an ACK sent back. It needs to
be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK
acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
ACK, drop the segment, and return". The "ignored" above implies that
the processing of the incoming data segment continues, which means
the ACK value is treated as acceptable. This mitigation makes the
ACK check more stringent since any ACK < SND.UNA wouldn't be
accepted, instead only ACKs that are in the range ((SND.UNA -
MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.
This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.
This greatly improves TCP security at a little cost.
I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.
tp->bytes_acked was added in linux-4.2
Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0
// ---------------- Handshake ------------------- //
// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.
+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4
// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997
// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535
// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001 |
| NVIDIA Triton Inference Server for Linux and Windows contains a vulnerability where a user can inject forged logs and executable commands by injecting arbitrary data as a new log entry. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where a user may cause an incorrect Initialization of resource by network issue. A successful exploit of this vulnerability may lead to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: testing: Initialize some variables annoteded with _free()
Variables annotated with __free() need to be initialized if the function
can return before they get updated for the first time or the attempt to
free the memory pointed to by them upon function return may crash the
kernel.
Fix this issue in some places in the thermal testing code. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix potential double remove of hotplug slot
In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cpum_sf: Fix and protect memory allocation of SDBs with mutex
Reservation of the PMU hardware is done at first event creation
and is protected by a pair of mutex_lock() and mutex_unlock().
After reservation of the PMU hardware the memory
required for the PMUs the event is to be installed on is
allocated by allocate_buffers() and alloc_sampling_buffer().
This done outside of the mutex protection.
Without mutex protection two or more concurrent invocations of
perf_event_init() may run in parallel.
This can lead to allocation of Sample Data Blocks (SDBs)
multiple times for the same PMU.
Prevent this and protect memory allocation of SDBs by
mutex. |
