| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.
[ 102.980303] Call Trace:
[ 102.980303] <TASK>
[ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 102.980740] process_one_work+0x21f/0x3f0
[ 102.980741] worker_thread+0x200/0x3e0
[ 102.980742] ? process_one_work+0x3f0/0x3f0
[ 102.980743] kthread+0xfd/0x130
[ 102.980743] ? kthread_complete_and_exit+0x20/0x20
[ 102.980744] ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: check IFF_UP earlier in Tx path
Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These
two paths share a call to common function xsk_xmit() which has two
sanity checks within. A pseudo code example to show the two paths:
__xsk_sendmsg() : xsk_poll():
if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs)))
return -ENXIO; return mask;
if (unlikely(need_wait)) (...)
return -EOPNOTSUPP; xsk_xmit()
mark napi id
(...)
xsk_xmit()
xsk_xmit():
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
As it can be observed above, in sendmsg() napi id can be marked on
interface that was not brought up and this causes a NULL ptr
dereference:
[31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018
[31757.512710] #PF: supervisor read access in kernel mode
[31757.517936] #PF: error_code(0x0000) - not-present page
[31757.523149] PGD 0 P4D 0
[31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI
[31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40
[31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180
[31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f
[31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246
[31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000
[31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100
[31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000
[31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa
[31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
[31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000
[31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0
[31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[31757.648139] PKRU: 55555554
[31757.650894] Call Trace:
[31757.653385] <TASK>
[31757.655524] sock_sendmsg+0x8f/0xa0
[31757.659077] ? sockfd_lookup_light+0x12/0x70
[31757.663416] __sys_sendto+0xfc/0x170
[31757.667051] ? do_sched_setscheduler+0xdb/0x1b0
[31757.671658] __x64_sys_sendto+0x20/0x30
[31757.675557] do_syscall_64+0x38/0x90
[31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48
[31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16
[31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000
[31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000
[31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[31757.754940] </TASK>
To fix this, let's make xsk_xmit a function that will be responsible for
generic Tx, where RCU is handled accordingly and pull out sanity checks
and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and
xsk_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix data-races around user->unix_inflight.
user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.
Let's annotate the write/read accesses to user->unix_inflight.
BUG: KCSAN: data-race in unix_attach_fds / unix_inflight
write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
unix_inflight+0x157/0x180 net/unix/scm.c:66
unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
too_many_unix_fds net/unix/scm.c:101 [inline]
unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg+0x148/0x160 net/socket.c:748
____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
___sys_sendmsg+0xc6/0x140 net/socket.c:2548
__sys_sendmsg+0x94/0x140 net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
value changed: 0x000000000000000c -> 0x000000000000000d
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't allow journal inode to have encrypt flag
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
A reproducer is:
mkfs.ext4 -F /dev/vdb
debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808"
mount /dev/vdb /mnt -o inlinecrypt
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
If we get -ENOMEM while dropping file extent items in a given range, at
btrfs_drop_extents(), due to failure to allocate memory when attempting to
increment the reference count for an extent or drop the reference count,
we handle it with a BUG_ON(). This is excessive, instead we can simply
abort the transaction and return the error to the caller. In fact most
callers of btrfs_drop_extents(), directly or indirectly, already abort
the transaction if btrfs_drop_extents() returns any error.
Also, we already have error paths at btrfs_drop_extents() that may return
-ENOMEM and in those cases we abort the transaction, like for example
anything that changes the b+tree may return -ENOMEM due to a failure to
allocate a new extent buffer when COWing an existing extent buffer, such
as a call to btrfs_duplicate_item() for example.
So replace the BUG_ON() calls with proper logic to abort the transaction
and return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails
Syzkaller detected a memory leak of skbs in ath9k_hif_usb_rx_stream().
While processing skbs in ath9k_hif_usb_rx_stream(), the already allocated
skbs in skb_pool are not freed if ath9k_hif_usb_rx_stream() fails. If we
have an incorrect pkt_len or pkt_tag, the input skb is considered invalid
and dropped. All the associated packets already in skb_pool should be
dropped and freed. Added a comment describing this issue.
The patch also makes remain_skb NULL after being processed so that it
cannot be referenced after potential free. The initialization of hif_dev
fields which are associated with remain_skb (rx_remain_len,
rx_transfer_len and rx_pad_len) is moved after a new remain_skb is
allocated.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
This should be applied to most URSAN bugs found recently by syzbot,
by guarding the dbMount. As syzbot feeding rubbish into the bmap
descriptor. |
| Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions may incorrectly identify the subdomain of a domain name and create a supercookie, which allows remote attackers who control a website that share the same TLD to read cookies set by the application. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
Syzkaller reports a null-ptr-deref bug as follows:
======================================================
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380
[...]
Call Trace:
<TASK>
vfs_parse_fs_param fs/fs_context.c:148 [inline]
vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129
vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191
generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231
do_new_mount fs/namespace.c:3036 [inline]
path_mount+0x12de/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
======================================================
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, hugetlbfs_parse_param() will dereference the
param->string, without checking whether it is a null pointer. To be more
specific, if hugetlbfs_parse_param() parses an illegal mount parameter,
such as "size=,", kernel will constructs struct fs_parameter with null
pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to
hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in hugetlbfs_parse_param(). |
| In the Linux kernel, the following vulnerability has been resolved:
9p: set req refcount to zero to avoid uninitialized usage
When a new request is allocated, the refcount will be zero if it is
reused, but if the request is newly allocated from slab, it is not fully
initialized before being added to idr.
If the p9_read_work got a response before the refcount initiated. It will
use a uninitialized req, which will result in a bad request data struct.
Here is the logs from syzbot.
Corrupted memory at 0xffff88807eade00b [ 0xff 0x07 0x00 0x00 0x00 0x00
0x00 0x00 . . . . . . . . ] (in kfence-#110):
p9_fcall_fini net/9p/client.c:248 [inline]
p9_req_put net/9p/client.c:396 [inline]
p9_req_put+0x208/0x250 net/9p/client.c:390
p9_client_walk+0x247/0x540 net/9p/client.c:1165
clone_fid fs/9p/fid.h:21 [inline]
v9fs_fid_xattr_set+0xe4/0x2b0 fs/9p/xattr.c:118
v9fs_xattr_set fs/9p/xattr.c:100 [inline]
v9fs_xattr_handler_set+0x6f/0x120 fs/9p/xattr.c:159
__vfs_setxattr+0x119/0x180 fs/xattr.c:182
__vfs_setxattr_noperm+0x129/0x5f0 fs/xattr.c:216
__vfs_setxattr_locked+0x1d3/0x260 fs/xattr.c:277
vfs_setxattr+0x143/0x340 fs/xattr.c:309
setxattr+0x146/0x160 fs/xattr.c:617
path_setxattr+0x197/0x1c0 fs/xattr.c:636
__do_sys_setxattr fs/xattr.c:652 [inline]
__se_sys_setxattr fs/xattr.c:648 [inline]
__ia32_sys_setxattr+0xc0/0x160 fs/xattr.c:648
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Below is a similar scenario, the scenario in the syzbot log looks more
complicated than this one, but this patch can fix it.
T21124 p9_read_work
======================== second trans =================================
p9_client_walk
p9_client_rpc
p9_client_prepare_req
p9_tag_alloc
req = kmem_cache_alloc(p9_req_cache, GFP_NOFS);
tag = idr_alloc
<< preempted >>
req->tc.tag = tag;
/* req->[refcount/tag] == uninitialized */
m->rreq = p9_tag_lookup(m->client, m->rc.tag);
/* increments uninitalized refcount */
refcount_set(&req->refcount, 2);
/* cb drops one ref */
p9_client_cb(req)
/* reader thread drops its ref:
request is incorrectly freed */
p9_req_put(req)
/* use after free and ref underflow */
p9_req_put(req)
To fix it, we can initialize the refcount to zero before add to idr. |
| Dataease is an open source data analytics and visualization platform. In Dataease versions up to 2.10.12 the H2 data source implementation (H2.java) does not verify that a provided JDBC URL starts with jdbc:h2. This lack of validation allows a crafted JDBC configuration that substitutes the Amazon Redshift driver and leverages the socketFactory and socketFactoryArg parameters to invoke org.springframework.context.support.FileSystemXmlApplicationContext or ClassPathXmlApplicationContext with an attacker‑controlled remote XML resource, resulting in remote code execution. Versions up to and including 2.10.12 are affected. The issue is fixed in version 2.10.13. Updating to version 2.10.13 or later is the recommended remediation. No known workarounds exist. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address
On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table
which contains invalid physical addresses, with high bits set which fall
outside the range of the CPU-s supported physical address range.
Calling acpi_os_map_memory() on such an invalid phys address leads to
the below WARN_ON in ioremap triggering resulting in an oops/stacktrace.
Add code to verify the physical address before calling acpi_os_map_memory()
to fix / avoid the oops.
[ 1.226900] ioremap: invalid physical address 3001000000000000
[ 1.226949] ------------[ cut here ]------------
[ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f
[ 1.226996] Modules linked in:
[ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490
[ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f
[ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00
[ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286
[ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000
[ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff
[ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18
[ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008
[ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000
[ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000
[ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0
[ 1.227167] Call Trace:
[ 1.227176] <TASK>
[ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370
[ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0
[ 1.227288] acpi_init_fpdt+0xa8/0x253
[ 1.227308] ? acpi_debugfs_init+0x1f/0x1f
[ 1.227339] do_one_initcall+0x5a/0x300
[ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80
[ 1.227442] kernel_init_freeable+0x28b/0x2cc
[ 1.227512] ? rest_init+0x170/0x170
[ 1.227538] kernel_init+0x16/0x140
[ 1.227552] ret_from_fork+0x1f/0x30
[ 1.227639] </TASK>
[ 1.227647] irq event stamp: 186819
[ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70
[ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70
[ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160
[ 1.227715] ---[ end trace 0000000000000000 ]--- |
| Dataease is an open source data analytics and visualization platform. In Dataease versions up to 2.10.12, the patch introduced to mitigate DB2 JDBC deserialization remote code execution attacks only blacklisted the rmi parameter. The ldap parameter in the DB2 JDBC connection string was not filtered, allowing attackers to exploit the DB2 JDBC connection string to trigger server-side request forgery (SSRF). In higher versions of Java, ldap deserialization (autoDeserialize) is disabled by default, preventing remote code execution, but SSRF remains exploitable. Versions up to 2.10.12 are affected. The issue is fixed in version 2.10.13. Updating to 2.10.13 or later is recommended. No known workarounds are documented aside from upgrading. |
| Remote staging in Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions does not properly obtain the remote address of the live site from the database which, which allows remote authenticated users to exfiltrate data to an attacker controlled server (i.e., a fake “live site”) via the _com_liferay_exportimport_web_portlet_ExportImportPortlet_remoteAddress and _com_liferay_exportimport_web_portlet_ExportImportPortlet_remotePort parameters. To successfully exploit this vulnerability, an attacker must also successfully obtain the staging server’s shared secret and add the attacker controlled server to the staging server’s whitelist. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix possible underflow for displays with large vblank
[Why]
Underflow observed when using a display with a large vblank region
and low refresh rate
[How]
Simplify calculation of vblank_nom
Increase value for VBlankNomDefaultUS to 800us |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
The return value of acpi_fetch_acpi_dev() could be NULL, which would
cause a NULL pointer dereference to occur in acpi_device_hid().
[ rjw: Subject and changelog edits, added empty line after if () ] |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool()
svc_create_memory_pool() is only called from stratix10_svc_drv_probe().
Most of resources in the probe are managed, but not this memremap() call.
There is also no memunmap() call in the file.
So switch to devm_memremap() to avoid a resource leak. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: Fix memory leak in acpi_buffer->pointer
There are memory leaks reported by kmemleak:
...
unreferenced object 0xffff00213c141000 (size 1024):
comm "systemd-udevd", pid 2123, jiffies 4294909467 (age 6062.160s)
hex dump (first 32 bytes):
04 00 00 00 02 00 00 00 18 10 14 3c 21 00 ff ff ...........<!...
00 00 00 00 00 00 00 00 03 00 00 00 10 00 00 00 ................
backtrace:
[<000000004b7c9001>] __kmem_cache_alloc_node+0x2f8/0x348
[<00000000b0fc7ceb>] __kmalloc+0x58/0x108
[<0000000064ff4695>] acpi_os_allocate+0x2c/0x68
[<000000007d57d116>] acpi_ut_initialize_buffer+0x54/0xe0
[<0000000024583908>] acpi_evaluate_object+0x388/0x438
[<0000000017b2e72b>] acpi_evaluate_object_typed+0xe8/0x240
[<000000005df0eac2>] coresight_get_platform_data+0x1b4/0x988 [coresight]
...
The ACPI buffer memory (buf.pointer) should be freed. But the buffer
is also used after returning from acpi_get_dsd_graph().
Move the temporary variables buf to acpi_coresight_parse_graph(),
and free it before the function return to prevent memory leak. |
