| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Prevent potential NULL dereference
The btrtl_initialize() function checks that rtl_load_file() either
had an error or it loaded a zero length file. However, if it loaded
a zero length file then the error code is not set correctly. It
results in an error pointer vs NULL bug, followed by a NULL pointer
dereference. This was detected by Smatch:
drivers/bluetooth/btrtl.c:592 btrtl_initialize() warn: passing zero to 'ERR_PTR' |
| BlueZ Phone Book Access Profile Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of BlueZ. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device.
The specific flaw exists within the handling of the Phone Book Access profile. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20938. |
| BlueZ Phone Book Access Profile Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of BlueZ. User interaction is required to exploit this vulnerability in that the target must connect to a malicious Bluetooth device.
The specific flaw exists within the handling of the Phone Book Access profile. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20936. |
| BlueZ Audio Profile AVRCP Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code via Bluetooth on affected installations of BlueZ. User interaction is required to exploit this vulnerability in that the target must connect to a malicious device.
The specific flaw exists within the handling of the AVRCP protocol. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19908. |
| BlueZ is a Bluetooth protocol stack for Linux. In affected versions a vulnerability exists in sdp_cstate_alloc_buf which allocates memory which will always be hung in the singly linked list of cstates and will not be freed. This will cause a memory leak over time. The data can be a very large object, which can be caused by an attacker continuously sending sdp packets and this may cause the service of the target device to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
process_one_work kernel/workqueue.c:3267 [inline]
process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
kthread+0x2cb/0x360 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Add error handling to pair_device()
hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.
Fixed by adding error handling in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
Commit 272970be3dab ("Bluetooth: hci_qca: Fix driver shutdown on closed
serdev") will cause below regression issue:
BT can't be enabled after below steps:
cold boot -> enable BT -> disable BT -> warm reboot -> BT enable failure
if property enable-gpios is not configured within DT|ACPI for QCA6390.
The commit is to fix a use-after-free issue within qca_serdev_shutdown()
by adding condition to avoid the serdev is flushed or wrote after closed
but also introduces this regression issue regarding above steps since the
VSC is not sent to reset controller during warm reboot.
Fixed by sending the VSC to reset controller within qca_serdev_shutdown()
once BT was ever enabled, and the use-after-free issue is also fixed by
this change since the serdev is still opened before it is flushed or wrote.
Verified by the reported machine Dell XPS 13 9310 laptop over below two
kernel commits:
commit e00fc2700a3f ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of bluetooth-next tree.
commit b23d98d46d28 ("Bluetooth: btusb: Fix triggering coredump
implementation for QCA") of linus mainline tree. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix not validating setsockopt user input
Check user input length before copying data. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: Fix not validating setsockopt user input
Check user input length before copying data. |
| An issue was discovered in drivers/bluetooth/hci_ldisc.c in the Linux kernel 6.2. In hci_uart_tty_ioctl, there is a race condition between HCIUARTSETPROTO and HCIUARTGETPROTO. HCI_UART_PROTO_SET is set before hu->proto is set. A NULL pointer dereference may occur. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix when get product name maybe null pointer
Due to incorrect dev->product reporting by certain devices, null
pointer dereferences occur when dev->product is empty, leading to
potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with
Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 56.671638] usb 4-3: string descriptor 0 read error: -22
[ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07
[ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0
[ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80
[ 56.697732] Oops[#1]:
[ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015
[ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024
[ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0
[ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000
[ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000
[ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005
[ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000
[ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028
[ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000
[ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000
[ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom]
[ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120
[ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE)
[ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
[ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 56.697835] BADV: 0000000000000000
[ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000)
[ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit
[ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3)
[ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000
[ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000
[ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0
[ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c
[ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440
[ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0
[ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c
[ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000
[ 56.697931] 90000001000bb8d0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54
CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
q kasan_report+0x143/0x180 mm/kasan/report.c:601
set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd10 kernel/workqueue.c:3389
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 5247:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
kasan_kmalloc include/linux/kasan.h:211 [inline]
__kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193
kmalloc_noprof include/linux/slab.h:681 [inline]
kzalloc_noprof include/linux/slab.h:807 [inline]
mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296
set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394
hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
sock_write_iter+0x2dd/0x400 net/socket.c:1160
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa72/0xc90 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5246:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2256 [inline]
slab_free mm/slub.c:4477 [inline]
kfree+0x149/0x360 mm/slub.c:4598
settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443
mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259
__mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455
hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191
hci_dev_do_close net/bluetooth/hci_core.c:483 [inline]
hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508
sock_do_ioctl+0x158/0x460 net/socket.c:1222
sock_ioctl+0x629/0x8e0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix error code in chan_alloc_skb_cb()
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name()
Add check for the return value of mgmt_alloc_skb() in
mgmt_remote_name() to prevent null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
Add check for the return value of mgmt_alloc_skb() in
mgmt_device_connected() to prevent null pointer dereference. |
| A flaw has been found in Tomofun Furbo 360 and Furbo Mini. The affected element is an unknown function of the component Bluetooth Handler. Executing manipulation can lead to denial of service. The attacker needs to be present on the local network. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in the handling of Bluetooth Low Energy (BLE) fixed channels (such as SMP or ATT). Specifically, an attacker could exploit a flaw that causes the BLE target (i.e., the device under attack) to attempt to disconnect a fixed channel, which is not allowed per the Bluetooth specification. This leads to undefined behavior, including potential assertion failures, crashes, or memory corruption, depending on the BLE stack implementation. |
| A vulnerability was found in Tomofun Furbo 360 and Furbo Mini. This affects an unknown function of the component Bluetooth Low Energy. The manipulation results in cleartext transmission of sensitive information. Access to the local network is required for this attack. Attacks of this nature are highly complex. The exploitability is reported as difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way. |
| An insecure permission vulnerability exists in the Agasta Easytouch+ version 9.3.97 The device allows unauthorized mobile applications to connect via Bluetooth Low Energy (BLE) without authentication. Once an unauthorized connection is established, legitimate applications are unable to connect, causing a denial of service. The attack requires proximity to the device, making it exploitable from an adjacent network location. |
