| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/scs: Reset task stack state in bringup_cpu()
To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks (SCS) are in use
the task's saved SCS SP is left pointing at an arbitrary point within
the task's shadow call stack.
When a CPU is offlined than onlined back into the kernel, this stale
state can adversely affect execution. Stale KASAN shadow can alias new
stackframes and result in bogus KASAN warnings. A stale SCS SP is
effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the idle task's
entire shadow call stack can become unusable.
We previously fixed the KASAN issue in commit:
e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug")
... by removing any stale KASAN stack poison immediately prior to
onlining a CPU.
Subsequently in commit:
f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled")
... the refactoring left the KASAN and SCS cleanup in one-time idle
thread initialization code rather than something invoked prior to each
CPU being onlined, breaking both as above.
We fixed SCS (but not KASAN) in commit:
63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit")
... but as this runs in the context of the idle task being offlined it's
potentially fragile.
To fix these consistently and more robustly, reset the SCS SP and KASAN
shadow of a CPU's idle task immediately before we online that CPU in
bringup_cpu(). This ensures the idle task always has a consistent state
when it is running, and removes the need to so so when exiting an idle
task.
Whenever any thread is created, dup_task_struct() will give the task a
stack which is free of KASAN shadow, and initialize the task's SCS SP,
so there's no need to specially initialize either for idle thread within
init_idle(), as this was only necessary to handle hotplug cycles.
I've tested this on arm64 with:
* gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK
* clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK
... offlining and onlining CPUS with:
| while true; do
| for C in /sys/devices/system/cpu/cpu*/online; do
| echo 0 > $C;
| echo 1 > $C;
| done
| done |
| NVIDIA NeMo Framework for all platforms contains a vulnerability in the export and deploy component, where malicious data created by an attacker could cause a code injection issue. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: cdev: fix uninitialised kfifo
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: use correct buffer size when parsing configfs lists
This commit fixes uvc gadget support on 32-bit platforms.
Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for
reuse") introduced a helper function __uvcg_iter_item_entries() to aid
with parsing lists of items on configfs attributes stores. This function
is a generalization of another very similar function, which used a
stack-allocated temporary buffer of fixed size for each item in the list
and used the sizeof() operator to check for potential buffer overruns.
The new function was changed to allocate the now variably sized temp
buffer on heap, but wasn't properly updated to also check for max buffer
size using the computed size instead of sizeof() operator.
As a result, the maximum item size was 7 (plus null terminator) on
64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just
barely enough, 3 is definitely too small for some of UVC configfs
attributes. For example, dwFrameInteval, specified in 100ns units,
usually has 6-digit item values, e.g. 166666 for 60fps. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: avoid zeroing outside-object freepointer for single free
Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing
separately") splits single and bulk object freeing in two functions
slab_free() and slab_free_bulk() which leads slab_free() to call
slab_free_hook() directly instead of slab_free_freelist_hook().
If `init_on_free` is set, slab_free_hook() zeroes the object.
Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are
set, the do_slab_free() slowpath executes freelist consistency
checks and try to decode a zeroed freepointer which leads to a
"Freepointer corrupt" detection in check_object().
During bulk free, slab_free_freelist_hook() isn't affected as it always
sets it objects freepointer using set_freepointer() to maintain its
reconstructed freelist after `init_on_free`.
For single free, object's freepointer thus needs to be avoided when
stored outside the object if `init_on_free` is set. The freepointer left
as is, check_object() may later detect an invalid pointer value due to
objects overflow.
To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the
command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`.
dmesg sample log:
[ 10.708715] =============================================================================
[ 10.710323] BUG kmalloc-rnd-05-32 (Tainted: G B T ): Freepointer corrupt
[ 10.712695] -----------------------------------------------------------------------------
[ 10.712695]
[ 10.712695] Slab 0xffffd8bdc400d580 objects=32 used=4 fp=0xffff9d9a80356f80 flags=0x200000000000a00(workingset|slab|node=0|zone=2)
[ 10.716698] Object 0xffff9d9a80356600 @offset=1536 fp=0x7ee4f480ce0ecd7c
[ 10.716698]
[ 10.716698] Bytes b4 ffff9d9a803565f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035666c: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035667c: 00 00 00 00 ....
[ 10.724696] FIX kmalloc-rnd-05-32: Object at 0xffff9d9a80356600 not freed |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to guarantee persisting compressed blocks by CP
If data block in compressed cluster is not persisted with metadata
during checkpoint, after SPOR, the data may be corrupted, let's
guarantee to write compressed page by checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to cover normal cluster write with cp_rwsem
When we overwrite compressed cluster w/ normal cluster, we should
not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data
will be corrupted if partial blocks were persisted before CP & SPOR,
due to cluster metadata wasn't updated atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix dpll_xa_ref_*_del() for multiple registrations
Currently, if there are multiple registrations of the same pin on the
same dpll device, following warnings are observed:
WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:143 dpll_xa_ref_pin_del.isra.0+0x21e/0x230
WARNING: CPU: 5 PID: 2212 at drivers/dpll/dpll_core.c:223 __dpll_pin_unregister+0x2b3/0x2c0
The problem is, that in both dpll_xa_ref_dpll_del() and
dpll_xa_ref_pin_del() registration is only removed from list in case the
reference count drops to zero. That is wrong, the registration has to
be removed always.
To fix this, remove the registration from the list and free
it unconditionally, instead of doing it only when the ref reference
counter reaches zero. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: fix possible name leak in ntb_register_device()
If device_register() fails in ntb_register_device(), the device name
allocated by dev_set_name() should be freed. As per the comment in
device_register(), callers should use put_device() to give up the
reference in the error path. So fix this by calling put_device() in the
error path so that the name can be freed in kobject_cleanup().
As a result of this, put_device() in the error path of
ntb_register_device() is removed and the actual error is returned.
[mani: reworded commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
md: Fix missing release of 'active_io' for flush
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
e1000e: change usleep_range to udelay in PHY mdic access
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay. |
| In the Linux kernel, the following vulnerability has been resolved:
pci_iounmap(): Fix MMIO mapping leak
The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(),
which means MMIO mappings are leaked.
Move the guard so we call iounmap() for MMIO mappings. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching board id
Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: qca: fix info leak when fetching fw build id
Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
When I did memory failure tests recently, below warning occurs:
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 8 PID: 1011 at kernel/locking/lockdep.c:232 __lock_acquire+0xccb/0x1ca0
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
FS: 00007ff9f32aa740(0000) GS:ffffa1ce5fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff9f3134ba0 CR3: 00000008484e4000 CR4: 00000000000006f0
Call Trace:
<TASK>
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
CPU: 8 PID: 1011 Comm: bash Kdump: loaded Not tainted 6.9.0-rc3-next-20240410-00012-gdb69f219f4be #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
panic+0x326/0x350
check_panic_on_warn+0x4f/0x50
__warn+0x98/0x190
report_bug+0x18e/0x1a0
handle_bug+0x3d/0x70
exc_invalid_op+0x18/0x70
asm_exc_invalid_op+0x1a/0x20
RIP: 0010:__lock_acquire+0xccb/0x1ca0
RSP: 0018:ffffa7a1c7fe3bd0 EFLAGS: 00000082
RAX: 0000000000000000 RBX: eb851eb853975fcf RCX: ffffa1ce5fc1c9c8
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffffa1ce5fc1c9c0
RBP: ffffa1c6865d3280 R08: ffffffffb0f570a8 R09: 0000000000009ffb
R10: 0000000000000286 R11: ffffffffb0f2ad50 R12: ffffa1c6865d3d10
R13: ffffa1c6865d3c70 R14: 0000000000000000 R15: 0000000000000004
lock_acquire+0xbe/0x2d0
_raw_spin_lock_irqsave+0x3a/0x60
hugepage_subpool_put_pages.part.0+0xe/0xc0
free_huge_folio+0x253/0x3f0
dissolve_free_huge_page+0x147/0x210
__page_handle_poison+0x9/0x70
memory_failure+0x4e6/0x8c0
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x380/0x540
ksys_write+0x64/0xe0
do_syscall_64+0xbc/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9f3114887
RSP: 002b:00007ffecbacb458 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007ff9f3114887
RDX: 000000000000000c RSI: 0000564494164e10 RDI: 0000000000000001
RBP: 0000564494164e10 R08: 00007ff9f31d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007ff9f321b780 R14: 00007ff9f3217600 R15: 00007ff9f3216a00
</TASK>
After git bisecting and digging into the code, I believe the root cause is
that _deferred_list field of folio is unioned with _hugetlb_subpool field.
In __update_and_free_hugetlb_folio(), folio->_deferred_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Unmap the surface before resetting it on a plane state
Switch to a new plane state requires unreferencing of all held surfaces.
In the work required for mob cursors the mapped surfaces started being
cached but the variable indicating whether the surface is currently
mapped was not being reset. This leads to crashes as the duplicated
state, incorrectly, indicates the that surface is mapped even when
no surface is present. That's because after unreferencing the surface
it's perfectly possible for the plane to be backed by a bo instead of a
surface.
Reset the surface mapped flag when unreferencing the plane state surface
to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland:
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920
R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00
FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
drm_atomic_helper_cleanup_planes+0x9b/0xc0
commit_tail+0xd1/0x130
drm_atomic_helper_commit+0x11a/0x140
drm_atomic_commit+0x97/0xd0
? __pfx___drm_printfn_info+0x10/0x10
drm_atomic_helper_update_plane+0xf5/0x160
drm_mode_cursor_universal+0x10e/0x270
drm_mode_cursor_common+0x102/0x230
? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
drm_ioctl_kernel+0xb2/0x110
drm_ioctl+0x26d/0x4b0
? __pfx_drm_mode_cursor2_ioctl+0x10/0x10
? __pfx_drm_ioctl+0x10/0x10
vmw_generic_ioctl+0xa4/0x110 [vmwgfx]
__x64_sys_ioctl+0x94/0xd0
do_syscall_64+0x61/0xe0
? __x64_sys_ioctl+0xaf/0xd0
? syscall_exit_to_user_mode+0x2b/0x40
? do_syscall_64+0x70/0xe0
? __x64_sys_ioctl+0xaf/0xd0
? syscall_exit_to_user_mode+0x2b/0x40
? do_syscall_64+0x70/0xe0
? exc_page_fault+0x7f/0x180
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f1e93f279ed
Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f>
RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed
RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015
RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007
R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0
R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790
</TASK>
Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine>
CR2: 0000000000000028
---[ end trace 0000000000000000 ]---
RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx]
Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f>
RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600
RBP: ffff969d4143
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
Btrfs clears the content of an extent buffer marked as
EXTENT_BUFFER_ZONED_ZEROOUT before the bio submission. This mechanism is
introduced to prevent a write hole of an extent buffer, which is once
allocated, marked dirty, but turns out unnecessary and cleaned up within
one transaction operation.
Currently, btrfs_clear_buffer_dirty() marks the extent buffer as
EXTENT_BUFFER_ZONED_ZEROOUT, and skips the entry function. If this call
happens while the buffer is under IO (with the WRITEBACK flag set,
without the DIRTY flag), we can add the ZEROOUT flag and clear the
buffer's content just before a bio submission. As a result:
1) it can lead to adding faulty delayed reference item which leads to a
FS corrupted (EUCLEAN) error, and
2) it writes out cleared tree node on disk
The former issue is previously discussed in [1]. The corruption happens
when it runs a delayed reference update. So, on-disk data is safe.
[1] https://lore.kernel.org/linux-btrfs/3f4f2a0ff1a6c818050434288925bdcf3cd719e5.1709124777.git.naohiro.aota@wdc.com/
The latter one can reach on-disk data. But, as that node is already
processed by btrfs_clear_buffer_dirty(), that will be invalidated in the
next transaction commit anyway. So, the chance of hitting the corruption
is relatively small.
Anyway, we should skip flagging ZEROOUT on a non-DIRTY extent buffer, to
keep the content under IO intact. |
