CVE-2026-53158

misc: fastrpc: Fix NULL pointer dereference in rpmsg callback

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53157

net: phonet: free phonet_device after RCU grace period

In the Linux kernel, the following vulnerability has been resolved: net: phonet: free phonet_device after RCU grace period phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-53139

drm/v3d: Skip CSD when it has zeroed workgroups

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Skip CSD when it has zeroed workgroups A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2 registers. Kicking off a dispatch with a zero count in any of the three dimensions is invalid. First, the hardware will process 0 as 65536, while the user-space driver exposes a maximum of 65535. Over that, a submission with a zeroed workgroup dimension should be a no-op. These zeroed counts can reach the dispatch path through an indirect CSD job, whose workgroup counts are only known once the indirect buffer is read and may legitimately be zero, but such scenario should only result in a no-op. Overwrite the indirect CSD job workgroup counts with the indirect BO ones, even if they are zeroed, and don't submit the job to the hardware when any of the workgroup counts is zero, so the job completes immediately instead of running the shader.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43355

iio: light: bh1780: fix PM runtime leak on error path

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-43219

net: cpsw_new: Fix potential unregister of netdev that has not been registered yet

In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31755

usb: cdns3: gadget: fix NULL pointer dereference in ep_queue

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix NULL pointer dereference in ep_queue When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-31732

gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()

In the Linux kernel, the following vulnerability has been resolved: gpio: Fix resource leaks on errors in gpiochip_add_data_with_key() Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-23052

ftrace: Do not over-allocate ftrace memory

In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not over-allocate ftrace memory The pg_remaining calculation in ftrace_process_locs() assumes that ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE (integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g. 4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages) have significantly more capacity than 256 * 170. This leads to pg_remaining being underestimated, which in turn makes skip (derived from skipped - pg_remaining) larger than expected, causing the WARN(skip != remaining) to trigger. Extra allocated pages for ftrace: 2 with 654 skipped WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0 A similar problem in ftrace_allocate_records() can result in allocating too many pages. This can trigger the second warning in ftrace_process_locs(). Extra allocated pages for ftrace WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580 Use the actual capacity of a page group to determine the number of pages to allocate. Have ftrace_allocate_pages() return the number of allocated pages to avoid having to calculate it. Use the actual page group capacity when validating the number of unused pages due to skipped entries. Drop the definition of ENTRIES_PER_PAGE since it is no longer used.

CVSS 3.1 · 7.0 High EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2022-50114

net: 9p: fix refcount leak in p9_read_work() error handling

In the Linux kernel, the following vulnerability has been resolved: net: 9p: fix refcount leak in p9_read_work() error handling p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid temporary refcount leak. [Dominique: commit wording adjustments, p9_req_put argument fixes for rebase]

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed

Vendors

Linux

Products

Linux Kernel

CVE-2026-20213

ClamAV PE File Format Processing Out-of-Bounds Memory Corruption Vulnerability

A vulnerability in the PE file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PE files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PE content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Cisco Clamav

Products

Secure Endpoint Clamav

CVE-2026-20217

ClamAV PESpin File Format Processing Out-of-Bounds Memory Corruption Vulnerability

A vulnerability in the PESpin file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PESpin files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains PESpin content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Cisco Clamav

Products

Secure Endpoint Clamav

CVE-2026-20215

ClamAV 7Zip File Format Processing Out-of-Bounds Memory Corruption Vulnerability

A vulnerability in the 7z file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition, or possibly other expanded impacts, resulting from memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in 7z files during scanning, which may result in an out-of-bounds buffer write. An attacker could exploit this vulnerability by submitting a crafted file that contains 7z&nbsp;content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Cisco Clamav

Products

Secure Endpoint Clamav

CVE-2026-54262

Wagtail: Pages translations can be created without page permissions when using simple_translation

Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, a low-level user with the "Can submit translation" permission can create translations for any page, including those they do not have permissions for. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed

Vendors

Torchbox Wagtail

Products

Wagtail Wagtail

CVE-2026-57272

GeoVision GeoWebPlayer Websocket Server out-of-bounds read vulnerability

GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### byPass command index-out-of-bound

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed

Vendors

Geovision Inc.

Products

Geowebplayer

CVE-2026-57679

WordPress GeekyBot plugin <= 1.2.5 - SQL Injection vulnerability

Unauthenticated SQL Injection in GeekyBot <= 1.2.5 versions.

CVSS 3.1 · 9.3 Critical EPSS < 1% KEV · Not listed

Vendors

—

Products

—

CVE-2026-57266

GeoVision GeoWebPlayer Websocket Server out-of-bounds read vulnerability

GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### 2wayAudio command index-out-of-bound

CVSS 3.1 · 8.3 High EPSS < 1% KEV · Not listed

Vendors

Geovision Inc.

Products

Geowebplayer

CVE-2026-8482

Information leak in NSRPC client history

A vulnerability was discovered on StormShield Network Security 4.3.0 to 4.3.41 (included), 4.8.0 to 4.8.15 (included) , 5.0.0 to 5.0.5 (included) There is a possible leak of secret information if administration commands have been passed with the CLI command line tool. Someone with SSH access to the firewall (if SSH multiuser mode is enabled) could possibly get the proxy CA passphrase or TPM password.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed

Vendors

Stormshield

Products

Stormshield Network Security

CVE-2026-13369

Ninja Forms - File Uploads <= 3.3.29 - Unauthenticated Arbitrary File Read via File Upload Field 'files[].data.file_path' Parameter

The Ninja Forms - File Uploads plugin for WordPress is vulnerable to Arbitrary File Read via the attach_files() function in versions up to, and including, 3.3.29. This is due to the get_files_for_attachment() function accepting a raw attacker-controlled 'files' array when the process() method returns early due to a client-supplied saveProgress flag, bypassing all upload validation, path normalization, and database record creation steps, and allowing an attacker-supplied file_path value to reach wp_mail() as an email attachment with only a file_exists() check. This makes it possible for unauthenticated attackers to read arbitrary files on the affected site's server.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed

Vendors

Saturdaydrive Wordpress

Products

Ninja Forms - File Uploads Wordpress

CVE-2025-58902

WordPress Lighthouse theme <= 1.2.12 - Local File Inclusion vulnerability

Unauthenticated Local File Inclusion in Lighthouse <= 1.2.12 versions.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed

Vendors

—

Products

—

CVE-2026-9673

json-2-csv: json-2-csv: CSV Injection vulnerability allows arbitrary code execution via `preventCsvInjection` bypass.

Versions of the package json-2-csv from 3.15.0 and before 5.5.11 are vulnerable to CSV Injection via the preventCsvInjection option which can be bypassed. An attacker can inject formulas into CSV files, which execute when the files are opened in spreadsheet applications.

CVSS 4.0 · 7 High EPSS < 1% KEV · Not listed

Vendors

Mrodrig

Products

Json-2-csv