| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ACE SECURITY WIP-90113 HD cameras contain an unauthenticated configuration disclosure vulnerability in the /web/cgi-bin/hi3510/backup.cgi endpoint. The endpoint permits remote download of a compressed configuration backup without requiring authentication or authorization. The exposed backup may include administrative credentials and other sensitive device settings, enabling an unauthenticated remote attacker to obtain information that could facilitate further compromise of the camera or connected network. |
| MSA FieldServer Gateway 5.0.0 through 6.5.2 allows cross-origin WebSocket hijacking. |
| Improper Privilege Management in uvdesk/community-skeleton |
| SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames.
User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack.
MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence. |
| APTRS (Automated Penetration Testing Reporting System) is a Python and Django-based automated reporting tool designed for penetration testers and security organizations. In 1.0, there is a vulnerability in the web application's handling of user-supplied input that is incorporated into a Jinja2 template. Specifically, when user input is improperly sanitized or validated, an attacker can inject Jinja2 syntax into the template, causing the server to execute arbitrary code. For example, an attacker might be able to inject expressions like {{ config }}, {{ self.class.mro[1].subclasses() }}, or more dangerous payloads that trigger execution of arbitrary Python code. The vulnerability can be reproduced by submitting crafted input to all the template fields handled by ckeditor, that are passed directly to a Jinja2 template. If the input is rendered without sufficient sanitization, it results in the execution of malicious Jinja2 code on the server. |
| Password Pusher is an open source application to communicate sensitive information over the web. A vulnerability has been reported in versions 1.50.3 and prior where an attacker can copy the session cookie before a user logs out, potentially allowing session hijacking. Although the session token is replaced and invalidated upon logout, if an attacker manages to capture the session cookie before this process, they can use the token to gain unauthorized access to the user's session until the token expires or is manually cleared. This vulnerability hinges on the attacker's ability to access the session cookie during an active session, either through a man-in-the-middle attack, by exploiting another vulnerability like XSS, or via direct access to the victim's device. Although there is no direct resolution to this vulnerability, it is recommended to always use the latest version of Password Pusher to best mitigate risk. If self-hosting, ensure Password Pusher is hosted exclusively over SSL connections to encrypt traffic and prevent session cookies from being intercepted in transit. Additionally, implement best practices in local security to safeguard user systems, browsers, and data against unauthorized access. |
| The WordPress + Microsoft Office 365 / Azure AD | LOGIN plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'pintra' shortcode in all versions up to, and including, 27.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Plate is a javascript toolkit that makes it easier for you to develop with Slate, a popular framework for building text editors. One longstanding feature of Plate is the ability to add custom DOM attributes to any element or leaf using the `attributes` property. These attributes are passed to the node component using the `nodeProps` prop. It has come to our attention that this feature can be used for malicious purposes, including cross-site scripting (XSS) and information exposure (specifically, users' IP addresses and whether or not they have opened a malicious document). Note that the risk of information exposure via attributes is only relevant to applications in which web requests to arbitrary URLs are not ordinarily allowed. Plate editors that allow users to embed images from arbitrary URLs, for example, already carry the risk of leaking users' IP addresses to third parties. All Plate editors using an affected version of @udecode/plate-core are vulnerable to these information exposure attacks via the style attribute and other attributes that can cause web requests to be sent. In addition, whether or not a Plate editor is vulnerable to cross-site scripting attacks using attributes depends on a number of factors. The most likely DOM attributes to be vulnerable are href and src on links and iframes respectively. Any component that spreads {...nodeProps} onto an <a> or <iframe> element and does not later override href or src will be vulnerable to XSS. In patched versions of Plate, we have disabled element.attributes and leaf.attributes for most attribute names by default, with some exceptions including target, alt, width, height, colspan and rowspan on the link, image, video, table cell and table header cell plugins. If this is a breaking change for you, you can selectively re-enable attributes for certain plugins as follows. Please carefully research and assess the security implications of any attribute you allow, as even seemingly innocuous attributes such as style can be used maliciously. If you are unable to upgrade to any of the patched versions, you should use a tool like patch-package or yarn patch to remove the logic from @udecode/plate-core that adds attributes to nodeProps. |
| OSS Endpoint Manager is an endpoint manager module for FreePBX. OSS Endpoint Manager module activation can allow authenticated web users unauthorized access to read system files with the permissions of the webserver process. This vulnerability is fixed in 14.0.4. |
| XStream is a simple library to serialize objects to XML and back again. This vulnerability may allow a remote attacker to terminate the application with a stack overflow error resulting in a denial of service only by manipulating the processed input stream when XStream is configured to use the BinaryStreamDriver. XStream 1.4.21 has been patched to detect the manipulation in the binary input stream causing the the stack overflow and raises an InputManipulationException instead. Users are advised to upgrade. Users unable to upgrade may catch the StackOverflowError in the client code calling XStream if XStream is configured to use the BinaryStreamDriver. |
| matrix-js-sdk is the Matrix Client-Server SDK for JavaScript and TypeScript. In matrix-js-sdk versions versions 9.11.0 through 34.7.0, the method `MatrixClient.sendSharedHistoryKeys` is vulnerable to interception by malicious homeservers. The method was introduced by MSC3061) and is commonly used to share historical message keys with newly invited users, granting them access to past messages in the room. However, it unconditionally sends these "shared" keys to all of the invited user's devices, regardless of whether the user's cryptographic identity is verified or whether the user's devices are signed by that identity. This allows the attacker to potentially inject its own devices to receive sensitive historical keys without proper security checks. Note that this only affects clients running the SDK with the legacy crypto stack. Clients using the new Rust cryptography stack (i.e. those that call `MatrixClient.initRustCrypto()` instead of `MatrixClient.initCrypto()`) are unaffected by this vulnerability, because `MatrixClient.sendSharedHistoryKeys()` raises an exception in such environments. The vulnerability was fixed in matrix-js-sdk 34.8.0 by removing the vulnerable functionality. As a workaround, remove use of affected functionality from clients. |
| The Paradox IP150 Internet Module in version 1.40.00 is vulnerable to Cross-Site Request Forgery (CSRF) attacks due to a lack of countermeasures and the use of the HTTP method `GET` to introduce changes in the system. |
| Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c. |
| UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands. |
| Aimeos is an e-commerce framework. All SaaS and marketplace setups using the Aimeos GraphQL API admin interface version from 2024.04 up to 2024.07.1 are affected by a potential denial of service attack. Version 2024.07.2 fixes the issue. |
| Simofa is a tool to help automate static website building and deployment. Prior to version 0.2.7, due to a design mistake in the RouteLoader class, some API routes may be publicly accessible when they should require authentication. This vulnerability has been patched in v0.2.7. |
| A vulnerability has been identified in SIMATIC S7-1200 CPU 1211C AC/DC/Rly (6ES7211-1BE40-0XB0), SIMATIC S7-1200 CPU 1211C DC/DC/DC (6ES7211-1AE40-0XB0), SIMATIC S7-1200 CPU 1211C DC/DC/Rly (6ES7211-1HE40-0XB0), SIMATIC S7-1200 CPU 1212C AC/DC/Rly (6ES7212-1BE40-0XB0), SIMATIC S7-1200 CPU 1212C DC/DC/DC (6ES7212-1AE40-0XB0), SIMATIC S7-1200 CPU 1212C DC/DC/Rly (6ES7212-1HE40-0XB0), SIMATIC S7-1200 CPU 1212FC DC/DC/DC (6ES7212-1AF40-0XB0), SIMATIC S7-1200 CPU 1212FC DC/DC/Rly (6ES7212-1HF40-0XB0), SIMATIC S7-1200 CPU 1214C AC/DC/Rly (6ES7214-1BG40-0XB0), SIMATIC S7-1200 CPU 1214C DC/DC/DC (6ES7214-1AG40-0XB0), SIMATIC S7-1200 CPU 1214C DC/DC/Rly (6ES7214-1HG40-0XB0), SIMATIC S7-1200 CPU 1214FC DC/DC/DC (6ES7214-1AF40-0XB0), SIMATIC S7-1200 CPU 1214FC DC/DC/Rly (6ES7214-1HF40-0XB0), SIMATIC S7-1200 CPU 1215C AC/DC/Rly (6ES7215-1BG40-0XB0), SIMATIC S7-1200 CPU 1215C DC/DC/DC (6ES7215-1AG40-0XB0), SIMATIC S7-1200 CPU 1215C DC/DC/Rly (6ES7215-1HG40-0XB0), SIMATIC S7-1200 CPU 1215FC DC/DC/DC (6ES7215-1AF40-0XB0), SIMATIC S7-1200 CPU 1215FC DC/DC/Rly (6ES7215-1HF40-0XB0), SIMATIC S7-1200 CPU 1217C DC/DC/DC (6ES7217-1AG40-0XB0), SIPLUS S7-1200 CPU 1212 AC/DC/RLY (6AG1212-1BE40-2XB0), SIPLUS S7-1200 CPU 1212 AC/DC/RLY (6AG1212-1BE40-4XB0), SIPLUS S7-1200 CPU 1212 DC/DC/RLY (6AG1212-1HE40-2XB0), SIPLUS S7-1200 CPU 1212 DC/DC/RLY (6AG1212-1HE40-4XB0), SIPLUS S7-1200 CPU 1212C DC/DC/DC (6AG1212-1AE40-2XB0), SIPLUS S7-1200 CPU 1212C DC/DC/DC (6AG1212-1AE40-4XB0), SIPLUS S7-1200 CPU 1212C DC/DC/DC RAIL (6AG2212-1AE40-1XB0), SIPLUS S7-1200 CPU 1214 AC/DC/RLY (6AG1214-1BG40-2XB0), SIPLUS S7-1200 CPU 1214 AC/DC/RLY (6AG1214-1BG40-4XB0), SIPLUS S7-1200 CPU 1214 AC/DC/RLY (6AG1214-1BG40-5XB0), SIPLUS S7-1200 CPU 1214 DC/DC/DC (6AG1214-1AG40-2XB0), SIPLUS S7-1200 CPU 1214 DC/DC/DC (6AG1214-1AG40-4XB0), SIPLUS S7-1200 CPU 1214 DC/DC/DC (6AG1214-1AG40-5XB0), SIPLUS S7-1200 CPU 1214 DC/DC/RLY (6AG1214-1HG40-2XB0), SIPLUS S7-1200 CPU 1214 DC/DC/RLY (6AG1214-1HG40-4XB0), SIPLUS S7-1200 CPU 1214 DC/DC/RLY (6AG1214-1HG40-5XB0), SIPLUS S7-1200 CPU 1214C DC/DC/DC RAIL (6AG2214-1AG40-1XB0), SIPLUS S7-1200 CPU 1214FC DC/DC/DC (6AG1214-1AF40-5XB0), SIPLUS S7-1200 CPU 1214FC DC/DC/RLY (6AG1214-1HF40-5XB0), SIPLUS S7-1200 CPU 1215 AC/DC/RLY (6AG1215-1BG40-2XB0), SIPLUS S7-1200 CPU 1215 AC/DC/RLY (6AG1215-1BG40-4XB0), SIPLUS S7-1200 CPU 1215 AC/DC/RLY (6AG1215-1BG40-5XB0), SIPLUS S7-1200 CPU 1215 DC/DC/DC (6AG1215-1AG40-2XB0), SIPLUS S7-1200 CPU 1215 DC/DC/DC (6AG1215-1AG40-4XB0), SIPLUS S7-1200 CPU 1215 DC/DC/RLY (6AG1215-1HG40-2XB0), SIPLUS S7-1200 CPU 1215 DC/DC/RLY (6AG1215-1HG40-4XB0), SIPLUS S7-1200 CPU 1215 DC/DC/RLY (6AG1215-1HG40-5XB0), SIPLUS S7-1200 CPU 1215C DC/DC/DC (6AG1215-1AG40-5XB0), SIPLUS S7-1200 CPU 1215FC DC/DC/DC (6AG1215-1AF40-5XB0). The web interface of the affected devices is vulnerable to Cross-Site Request Forgery (CSRF) attacks. This could allow an unauthenticated attacker to change the CPU mode by tricking a legitimate and authenticated user with sufficient permissions on the target CPU to click on a malicious link. |
| If a DHCPv4 client sends a request with some specific options, and Kea fails to find an appropriate subnet for the client, the `kea-dhcp4` process will abort with an assertion failure. This happens only if the client request is unicast directly to Kea; broadcast messages do not cause the problem.
This issue affects Kea versions 2.7.1 through 2.7.9, 3.0.0, and 3.1.0. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_perf_event_output
The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.
However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.
This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffffff82be3eea
...
Call Trace:
? __die+0x1f/0x70
? page_fault_oops+0x176/0x4d0
? exc_page_fault+0x132/0x230
? asm_exc_page_fault+0x22/0x30
? perf_output_sample+0x12b/0x910
? perf_event_output+0xd0/0x1d0
? bpf_perf_event_output+0x162/0x1d0
? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
? __uprobe_perf_func+0x12b/0x540
? uprobe_dispatcher+0x2c4/0x430
? uprobe_notify_resume+0x2da/0xce0
? atomic_notifier_call_chain+0x7b/0x110
? exit_to_user_mode_prepare+0x13e/0x290
? irqentry_exit_to_user_mode+0x5/0x30
? asm_exc_int3+0x35/0x40
Fixing this by disabling preemption in bpf_perf_event_output. |
| FutureNet NXR series routers provided by Century Systems Co., Ltd. have REST-APIs, which are configured as disabled in the initial (factory default) configuration. But, REST-APIs are unexpectedly enabled when the affected product is powered up, provided either http-server (GUI) or Web authentication is enabled. The factory default configuration makes http-server (GUI) enabled, which means REST-APIs are also enabled. The username and the password for REST-APIs are configured in the factory default configuration. As a result, an attacker may obtain and/or alter the affected product's settings via REST-APIs. |
