| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered.
Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and
ldev->pf[MLX5_LAG_P1].dev have valid pointers when
MLX5_LAG_FLAG_NDEVS_READY is set.
The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and
clearing it. Setting it is done wrongly when both
ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set;
clearing it is done right when either of ldev->pf[i].netdev is cleared.
Consider the following scenario:
1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer
2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and
ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in
MLX5_LAG_FLAG_NDEVS_READY is set.
3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev.
MLX5_LAG_FLAG_NDEVS_READY remains set.
Further execution of mlx5_do_bond() will result in null pointer
dereference when calling mlx5_lag_is_multipath()
This patch fixes the following call trace actually encountered:
[ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8
[ 1293.478756] #PF: supervisor read access in kernel mode
[ 1293.481320] #PF: error_code(0x0000) - not-present page
[ 1293.483686] PGD 0 P4D 0
[ 1293.484434] Oops: 0000 [#1] SMP PTI
[ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1
[ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core]
[ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8
[ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202
[ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000
[ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000
[ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c
[ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0
[ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858
[ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000
[ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0
[ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: xsk: prohibit usage of non-balanced queue id
Fix the following scenario:
1. ethtool -L $IFACE rx 8 tx 96
2. xdpsock -q 10 -t -z
Above refers to a case where user would like to attach XSK socket in
txonly mode at a queue id that does not have a corresponding Rx queue.
At this moment ice's XSK logic is tightly bound to act on a "queue pair",
e.g. both Tx and Rx queues at a given queue id are disabled/enabled and
both of them will get XSK pool assigned, which is broken for the presented
queue configuration. This results in the splat included at the bottom,
which is basically an OOB access to Rx ring array.
To fix this, allow using the ids only in scope of "combined" queues
reported by ethtool. However, logic should be rewritten to allow such
configurations later on, which would end up as a complete rewrite of the
control path, so let us go with this temporary fix.
[420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082
[420160.566359] #PF: supervisor read access in kernel mode
[420160.572657] #PF: error_code(0x0000) - not-present page
[420160.579002] PGD 0 P4D 0
[420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI
[420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10
[420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice]
[420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85
[420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282
[420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8
[420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000
[420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000
[420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a
[420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828
[420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000
[420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0
[420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[420160.740707] PKRU: 55555554
[420160.745960] Call Trace:
[420160.750962] <TASK>
[420160.755597] ? kmalloc_large_node+0x79/0x90
[420160.762703] ? __kmalloc_node+0x3f5/0x4b0
[420160.769341] xp_assign_dev+0xfd/0x210
[420160.775661] ? shmem_file_read_iter+0x29a/0x420
[420160.782896] xsk_bind+0x152/0x490
[420160.788943] __sys_bind+0xd0/0x100
[420160.795097] ? exit_to_user_mode_prepare+0x20/0x120
[420160.802801] __x64_sys_bind+0x16/0x20
[420160.809298] do_syscall_64+0x38/0x90
[420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[420160.823731] RIP: 0033:0x7fa86a0dd2fb
[420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48
[420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb
[420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003
[420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000
[420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0
[420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000
[420160.919817] </TASK>
[420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix metadata dst->dev xmit null pointer dereference
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev
== NULL) through xfrm interface we can hit a null pointer dereference[1]
in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a
loopback skb device when there's no policy which dereferences dst->dev
unconditionally. Not having dst->dev can be interepreted as it not being
a loopback device, so just add a check for a null dst_orig->dev.
With this fix xfrm interface's Tx error counters go up as usual.
[1] net-next calltrace captured via netconsole:
BUG: kernel NULL pointer dereference, address: 00000000000000c0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60
Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02
RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80
RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000
R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0
Call Trace:
<TASK>
xfrmi_xmit+0xde/0x460
? tcf_bpf_act+0x13d/0x2a0
dev_hard_start_xmit+0x72/0x1e0
__dev_queue_xmit+0x251/0xd30
ip_finish_output2+0x140/0x550
ip_push_pending_frames+0x56/0x80
raw_sendmsg+0x663/0x10a0
? try_charge_memcg+0x3fd/0x7a0
? __mod_memcg_lruvec_state+0x93/0x110
? sock_sendmsg+0x30/0x40
sock_sendmsg+0x30/0x40
__sys_sendto+0xeb/0x130
? handle_mm_fault+0xae/0x280
? do_user_addr_fault+0x1e7/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7ff35cac1366
Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366
RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003
RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001
</TASK>
Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole]
CR2: 00000000000000c0 |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Wireless Provisioning System allows an authorized attacker to elevate privileges locally. |
| Double free in Microsoft Wireless Provisioning System allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Subsystem for Linux GUI allows an unauthorized attacker to execute code over a network. |
| Improper neutralization of special elements used in a command ('command injection') in Visual Studio Code CoPilot Chat Extension allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Routing and Remote Access Service (RRAS) allows an authorized attacker to execute code over a network. |
| The YSlider plugin for WordPress is vulnerable to Cross-Site Request Forgery to Stored Cross-Site Scripting in all versions up to, and including, 1.1. This is due to missing nonce verification on the content configuration page and insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages via a forged request granted they can trick an administrator into performing an action such as clicking on a link. The injected scripts will execute whenever a user accesses an injected page. |
| The Eventbee Ticketing Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'eventbeeticketwidget' shortcode in all versions up to, and including, 1.0. This is due to the plugin not properly sanitizing user input and output of several parameters. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The EasyCommerce – AI-Powered, Fast & Beautiful WordPress Ecommerce Plugin plugin for WordPress is vulnerable to Privilege Escalation in versions 0.9.0-beta2 to 1.5.0. This is due to the /easycommerce/v1/orders REST API endpoint not properly restricting the ability for users to select roles during registration. This makes it possible for unauthenticated attackers to gain administrator-level access to a vulnerable site. |
| The Holiday class post calendar plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 7.1 via the 'contents' parameter. This is due to a lack of sanitization of user-supplied data when creating a cache file. This makes it possible for unauthenticated attackers to execute code on the server. |
| The Share to Google Classroom plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the share_to_google shortcode in all versions up to, and including, 1.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The WP移行専用プラグイン for CPI plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the Cpiwm_Import_Controller::import function in all versions up to, and including, 1.0.2. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The Chart Expert plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pmzez_chart' shortcode in all versions up to, and including, 1.0. This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Magazine Companion plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'headerHtmlTag' attribute in the bnm-blocks/featured-posts-1 block in all versions up to, and including, 1.2.3. This is due to insufficient input sanitization and output escaping when using user-supplied values as HTML tag names. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Improper validation of generative ai output in GitHub Copilot and Visual Studio Code allows an authorized attacker to bypass a security feature locally. |
| The Preload Current Images plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'complete' parameter in the 'preload_progress_bar' shortcode in all versions up to, and including, 1.3. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The WP Count Down Timer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple parameters of the 'wp_countdown_timer' shortcode in all versions up to, and including, 1.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
