| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. |
| A vulnerability in the logging subsystem of the Cisco Firepower Threat Defense (FTD) Firepower Device Manager (FDM) could allow an unauthenticated, remote attacker to add arbitrary entries to the audit log. This vulnerability affects Cisco Firepower Threat Defense Software versions 6.1.x on the following vulnerable products that have enabled FDM: ASA5506-X ASA5506W-X ASA5506H-X ASA5508-X ASA5516-X ASA5512-X ASA5515-X ASA5525-X ASA5545-X ASA5555-X. More Information: CSCvb86860. Known Affected Releases: FRANGELICO. Known Fixed Releases: 6.2.0. |
| On the Zephyr ARM port, enabling the hardware FPU (CONFIG_FPU) forces the "Floating point ABI" choice, which defaults to CONFIG_FP_HARDABI. Both FP_HARDABI and FP_SOFTABI permit the compiler to emit hardware FP instructions in any function, even code that never uses floating-point types. However, the callee-saved FP registers (s16-s31 / d8-d15) are only saved and restored across a context switch when CONFIG_FPU_SHARING is enabled (arch/arm/core/cortex_m/swap_helper.S and arch/arm/core/cortex_a_r/swap_helper.S), and prior to this fix selecting an ABI did not enable FPU register sharing, which defaults off.
In a build that enables the FPU with the default ABI but leaves CONFIG_FPU_SHARING disabled, the kernel preserves no callee-saved FP register state across thread switches. The documented precondition for this "unshared" mode — that only a single thread ever executes FP instructions — is silently violated because the compiler may generate FP instructions in every thread.
Under CONFIG_USERSPACE, where threads are mutually isolated, this becomes an information-disclosure boundary crossing: a victim thread can leave secret-derived values in s16-s31, and a co-resident unprivileged thread can read those registers directly (FP register access is not privilege-gated), recovering data left behind by another thread. Without userspace the same defect causes cross-thread FP state corruption (a correctness fault). The leak is bounded to the 16 callee-saved single-precision registers and is opportunistic, so impact is low.
The fix makes FP_HARDABI and FP_SOFTABI select CONFIG_FPU_SHARING and tags every thread with K_FP_REGS at creation, so callee-saved FP state is always preserved across context switches whenever the compiler may emit FP instructions. |
| An information disclosure vulnerability in Windmill Labs Windmill through 1.783.0 allows any authenticated workspace member to read legacy ownerless draft scripts that contain plaintext resource credentials. Drafts with a null owner email bypass ACL enforcement and are returned to any workspace member who queries the drafts endpoint. Sensitive credentials stored in these drafts are exposed across ACL boundaries. |
| Mastodon is a free, open-source social network server based on ActivityPub. From 4.6.0-beta.1 until 4.6.4 and 4.7.0-beta.1, any logged-in local user could use the show action in app/controllers/admin/collections_controller.rb to access personally identifying information about another local user in a collection because the controller used the general collection policy instead of the admin collection policy namespace. The exposed data included the other user's current email address and last-used IP address. This issue is fixed in versions 4.6.4 and 4.7.0-beta.1. |
| A flaw was found in iperf3. A remote attacker can exploit this vulnerability by sending crafted control-channel JSON with oversized numeric parameters, such as `parallel` and `len`, which are not properly validated by the server. This improper input validation can lead to excessive stream and thread creation, as well as large buffer allocations, causing resource exhaustion. Consequently, this can result in a Denial of Service (DoS) on the affected iperf3 server. |
| The Advanced Classifieds & Directory Pro Advanced Classifieds & Directory Pro WordPress plugin before 3.4.3 (<= 3.4.2) is vulnerable to unauthenticated sensitive information exposure via the AJAX action `acadp_public_custom_fields_listings`. |
| IBM Security Verify could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. |
| A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation. |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: EDI). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle EDI Gateway accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: EDI). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle EDI Gateway accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle EDI Gateway executes to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle EDI Gateway accessible data. CVSS 3.1 Base Score 1.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:L/I:N/A:N). |
| The File Manager WordPress plugin before 6.9.1 does not have authorisation checks on one of its REST API routes, allowing unauthenticated users to read its file activity log, disclosing the file operations performed on the site, the paths involved and the name of the user who performed them. |
| The File Manager WordPress plugin before 6.9.1 does not perform any capability check on one of its file manager connector endpoints, allowing any authenticated user, such as a subscriber, to browse the entire WordPress installation directory and download files of certain types from it, including archives and documents which may contain sensitive data. |
| Improper access control in SmartThings prior to version 1.8.47.24 allows local attackers to access sensitive information. |
| HCL BigFix Mobile is vulnerable to information disclosure due to improper handling of exceptions and verbose error reporting. |
| A file deletion vulnerability in Palo Alto Networks PAN-OS® software enables an unauthenticated attacker with network access to the management web interface to delete files from a temporary directory.
The security risk posed by this issue is minimized by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma® Access are not impacted by this vulnerability. |
| In the kernel in Insyde InsydeH2O 5.x, certain SMM drivers did not correctly validate the CommBuffer and CommBufferSize parameters, allowing callers to corrupt either the firmware or the OS memory. The fixed versions for this issue in the AhciBusDxe, IdeBusDxe, NvmExpressDxe, SdHostDriverDxe, and SdMmcDeviceDxe drivers are 05.16.25, 05.26.25, 05.35.25, 05.43.25, and 05.51.25 (for Kernel 5.1 through 5.5). |
| Affected versions of cti-transmute insufficiently validate saved graph configuration data. Graph configurations can contain style properties that are later consumed by Pivotick, and Pivotick interprets svgIcon as HTML. Because saved configurations may be created by one user and later displayed to other users—including administrators—a malicious user could store a crafted svgIcon value that executes script in another viewer’s browser.
The fix introduces a strict configuration schema on both the server and client. Only known properties are accepted, style entries are limited to shape, color, and size, and dangerous properties such as svgIcon and iconClass are explicitly rejected. Existing stored configurations are also sanitized when listed and again before being applied in the browser. |
