| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mmp2: call pm_genpd_init() only after genpd.name is set
Setting the genpd's struct device's name with dev_set_name() is
happening within pm_genpd_init(). If it remains NULL, things can blow up
later, such as when crafting the devfs hierarchy for the power domain:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
...
Call trace:
strlen from start_creating+0x90/0x138
start_creating from debugfs_create_dir+0x20/0x178
debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144
genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90
genpd_debug_init from do_one_initcall+0x5c/0x244
do_one_initcall from kernel_init_freeable+0x19c/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core:
Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name
with dev_name(&genpd->dev) in genpd_debug_add.part(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp
Similar to the r_pipe sspp protect, add a check to protect
the pipe state prints to avoid NULL ptr dereference for cases when
the state is dumped without a corresponding atomic_check() where the
pipe->sspp is assigned.
Patchwork: https://patchwork.freedesktop.org/patch/628404/ |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: th1520: Fix a NULL vs IS_ERR() bug
The devm_ioremap() function doesn't return error pointers, it returns
NULL. Update the error checking to match. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: tps6594: Fix integer overflow on 32bit systems
The problem is this multiply in tps6594_rtc_set_offset()
tmp = offset * TICKS_PER_HOUR;
The "tmp" variable is an s64 but "offset" is a long in the
(-277774)-277774 range. On 32bit systems a long can hold numbers up to
approximately two billion. The number of TICKS_PER_HOUR is really large,
(32768 * 3600) or roughly a hundred million. When you start multiplying
by a hundred million it doesn't take long to overflow the two billion
mark.
Probably the safest way to fix this is to change the type of
TICKS_PER_HOUR to long long because it's such a large number. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix divide error in DM plane scale calcs
dm_get_plane_scale doesn't take into account plane scaled size equal to
zero, leading to a kernel oops due to division by zero. Fix by setting
out-scale size as zero when the dst size is zero, similar to what is
done by drm_calc_scale(). This issue started with the introduction of
cursor ovelay mode that uses this function to assess cursor mode changes
via dm_crtc_get_cursor_mode() before checking plane state.
[Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231
[ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66
[ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246
[ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500
[ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4
[ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00
[ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010
[ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0
[ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000
[ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0
[ +0.000004] Call Trace:
[ +0.000007] <TASK>
[ +0.000006] ? __die_body.cold+0x19/0x27
[ +0.000009] ? die+0x2e/0x50
[ +0.000007] ? do_trap+0xca/0x110
[ +0.000007] ? do_error_trap+0x6a/0x90
[ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000504] ? exc_divide_error+0x38/0x50
[ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000488] ? asm_exc_divide_error+0x1a/0x20
[ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu]
[ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu]
[ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu]
[ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm]
[ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm]
[ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm]
[ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm]
[ +0.000062] drm_ioctl+0x27a/0x4f0 [drm]
[ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm]
[ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu]
[ +0.000360] __x64_sys_ioctl+0x97/0xd0
[ +0.000010] do_syscall_64+0x82/0x190
[ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm]
[ +0.000044] ? srso_return_thunk+0x5/0x5f
[ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm]
[ +0.000040] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __check_object_size+0x50/0x220
[ +0.000007] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm]
[ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm]
[ +0.000043] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __pm_runtime_suspend+0x69/0xc0
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu]
[ +0.000366] ? srso_return_thunk+0x5/0x5f
[ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210
[ +0.000007] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? do_syscall_64+0x8e/0x190
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000006] ? do_syscall_64+0x8e/0x190
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000008] RIP: 0033:0x55bb7cd962bc
[ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Prevent integer overflow issue
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32
values that come from the user so the multiplication can lead to integer
wrapping. Then we pass the result to uverbs_request_next_ptr() which also
could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)"
multiplication can also overflow on 32bit systems although it's fine on
64bit systems.
This patch does two things. First, I've re-arranged the condition in
uverbs_request_next_ptr() so that the use controlled variable "len" is on
one side of the comparison by itself without any math. Then I've modified
all the callers to use size_mul() for the multiplications. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of FPMR will be retained.
Before this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0xffff800083963d50
After this patch:
| # ./fpmr-test
| Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d
| SETREGSET(nt=0x40e, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d
|
| Attempting to write NT_ARM_FPMR (zero length)
| SETREGSET(nt=0x40e, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_FPMR::fpmr
| GETREGSET(nt=0x40e, len=8) read 8 bytes
| Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
Currently poe_set() doesn't initialize the temporary 'ctrl' variable,
and a SETREGSET call with a length of zero will leave this
uninitialized. Consequently an arbitrary value will be written back to
target->thread.por_el0, potentially leaking up to 64 bits of memory from
the kernel stack. The read is limited to a specific slot on the stack,
and the issue does not provide a write mechanism.
Fix this by initializing the temporary value before copying the regset
from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG,
NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing
contents of POR_EL1 will be retained.
Before this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50
After this patch:
| # ./poe-test
| Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d
| SETREGSET(nt=0x40f, len=8) wrote 8 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d
|
| Attempting to write NT_ARM_POE (zero length)
| SETREGSET(nt=0x40f, len=0) wrote 0 bytes
|
| Attempting to read NT_ARM_POE::por_el0
| GETREGSET(nt=0x40f, len=8) read 8 bytes
| Read NT_ARM_POE::por_el0 = 0x900d900d900d900d |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
This will ensure that the scsi host is cleaned up properly using
scsi_host_dev_release(). Otherwise, it may lead to memory leaks. |
| An access control issue in the component form2WlAc.cgi of D-Link 816A2_FWv1.10CNB05_R1B011D88210 allows unauthenticated attackers to set the 2.4G and 5G mac access control list of the device via a crafted POST request. |
| An arbitrary file upload vulnerability in the component /userPicture of Timo v2.0.3 allows attackers to execute arbitrary code via uploading a crafted file. |
| A prototype pollution in the lib.requireFromString function of module-from-string v3.3.1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted payload. |
| An issue in Pixocial Technology (Singapore) Pte. Ltd BeautyPlus iOS 7.8.010 allows attackers to access sensitive user information via supplying a crafted link. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*... |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpkoithemes WPKoi Templates for Elementor wpkoi-templates-for-elementor allows Stored XSS.This issue affects WPKoi Templates for Elementor: from n/a through <= 3.1.3. |
| Missing Authorization vulnerability in spreadr Spreadr Woocommerce spreadr-for-woocomerce allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Spreadr Woocommerce: from n/a through <= 1.0.4. |
| Missing Authorization vulnerability in ksher thailand Ksher ksher-payment allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ksher: from n/a through <= 1.1.1. |
| TYPO3 is a free and open source Content Management Framework. A vulnerability has been identified in the backend user interface functionality involving deep links. Specifically, this functionality is susceptible to Cross-Site Request Forgery (CSRF). Additionally, state-changing actions in downstream components incorrectly accepted submissions via HTTP GET and did not enforce the appropriate HTTP method. Successful exploitation of this vulnerability requires the victim to have an active session on the backend user interface and to be deceived into interacting with a malicious URL targeting the backend, which can occur under the following conditions: The user opens a malicious link, such as one sent via email. The user visits a compromised or manipulated website while the following settings are misconfigured: 1. `security.backend.enforceReferrer` feature is disabled, 2. `BE/cookieSameSite` configuration is set to lax or none. The vulnerability in the affected downstream component “Scheduler Module” allows attackers to trigger pre-defined command classes - which can lead to unauthorized import or export of data in the worst case. Users are advised to update to TYPO3 versions 11.5.42 ELTS which fixes the problem described. There are no known workarounds for this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
block: Prevent potential deadlocks in zone write plug error recovery
Zone write plugging for handling writes to zones of a zoned block
device always execute a zone report whenever a write BIO to a zone
fails. The intent of this is to ensure that the tracking of a zone write
pointer is always correct to ensure that the alignment to a zone write
pointer of write BIOs can be checked on submission and that we can
always correctly emulate zone append operations using regular write
BIOs.
However, this error recovery scheme introduces a potential deadlock if a
device queue freeze is initiated while BIOs are still plugged in a zone
write plug and one of these write operation fails. In such case, the
disk zone write plug error recovery work is scheduled and executes a
report zone. This in turn can result in a request allocation in the
underlying driver to issue the report zones command to the device. But
with the device queue freeze already started, this allocation will
block, preventing the report zone execution and the continuation of the
processing of the plugged BIOs. As plugged BIOs hold a queue usage
reference, the queue freeze itself will never complete, resulting in a
deadlock.
Avoid this problem by completely removing from the zone write plugging
code the use of report zones operations after a failed write operation,
instead relying on the device user to either execute a report zones,
reset the zone, finish the zone, or give up writing to the device (which
is a fairly common pattern for file systems which degrade to read-only
after write failures). This is not an unreasonnable requirement as all
well-behaved applications, FSes and device mapper already use report
zones to recover from write errors whenever possible by comparing the
current position of a zone write pointer with what their assumption
about the position is.
The changes to remove the automatic error recovery are as follows:
- Completely remove the error recovery work and its associated
resources (zone write plug list head, disk error list, and disk
zone_wplugs_work work struct). This also removes the functions
disk_zone_wplug_set_error() and disk_zone_wplug_clear_error().
- Change the BLK_ZONE_WPLUG_ERROR zone write plug flag into
BLK_ZONE_WPLUG_NEED_WP_UPDATE. This new flag is set for a zone write
plug whenever a write opration targetting the zone of the zone write
plug fails. This flag indicates that the zone write pointer offset is
not reliable and that it must be updated when the next report zone,
reset zone, finish zone or disk revalidation is executed.
- Modify blk_zone_write_plug_bio_endio() to set the
BLK_ZONE_WPLUG_NEED_WP_UPDATE flag for the target zone of a failed
write BIO.
- Modify the function disk_zone_wplug_set_wp_offset() to clear this
new flag, thus implementing recovery of a correct write pointer
offset with the reset (all) zone and finish zone operations.
- Modify blkdev_report_zones() to always use the disk_report_zones_cb()
callback so that disk_zone_wplug_sync_wp_offset() can be called for
any zone marked with the BLK_ZONE_WPLUG_NEED_WP_UPDATE flag.
This implements recovery of a correct write pointer offset for zone
write plugs marked with BLK_ZONE_WPLUG_NEED_WP_UPDATE and within
the range of the report zones operation executed by the user.
- Modify blk_revalidate_seq_zone() to call
disk_zone_wplug_sync_wp_offset() for all sequential write required
zones when a zoned block device is revalidated, thus always resolving
any inconsistency between the write pointer offset of zone write
plugs and the actual write pointer position of sequential zones. |
| This issue was addressed by using HTTPS when sending information over the network. This issue is fixed in iOS 18.2 and iPadOS 18.2, iPadOS 17.7.3, macOS Sequoia 15.2, visionOS 2.2. An attacker in a privileged network position may be able to alter network traffic. |
