| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to
lock the inode of the supplied dentry without checking if it is
NULL. If a negative dentry is passed (e.g. from
security_inode_create), d_inode(dentry) returns NULL, and
inode_lock(inode) will cause a NULL pointer dereference.
Trivially fix this by adding a NULL check for inode before attempting
to lock it, returning -EINVAL if it is NULL.
Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and
bpf_xattr_write_permission(). These warnings could be triggered by
passing a negative dentry to bpf_get_dentry_xattr() or the _locked
variants of the xattr kfuncs, potentially causing a Denial of Service
on systems with panic_on_warn enabled. Instead, simply return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Fix potential tracepoint null pointer dereferences
Trace_dma_fence_signaled, trace_dma_fence_wait_end and
trace_dma_fence_destroy can all currently dereference a null fence->ops
pointer after it has been reset on fence signalling.
Lets use the safe string getters for most tracepoints to avoid this class
of a problem, while for the signal tracepoint we move it to before ops are
cleared to avoid losing the driver and timeline name information. Apart
from moving it we also need to add a new tracepoint class to bypass the
safe name getters since the signaled bit is already set.
For dma_fence_init we also need to use the new tracepoint class since the
rcu read lock is not held there, and we can do the same for the enable
signaling since there we are certain the fence cannot be signaled while
we are holding the lock and have even validated the fence->ops. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page
objects, which GPUSVM requires in order to operate correctly. In
particular, get_pages() relies on hmm_range_fault() to resolve struct
pages for the target range.
Attempting to create an SVM range on such VMAs results in repeated
get_pages() failures and can lead to an infinite loop inside a driver’s
page‑fault handler. Prevent this by rejecting ranges on VM_IO or
VM_PFNMAP VMAs and returning -EIO. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix leak when pinning ubuf pages
When pin_user_pages_fast() returns fewer pages than requested, the pages
that were successfully pinned are not released, leading to a leak.
Fix this by unpinning any partially pinned pages before returning failure. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: fix NULL pointer dereference in afs_get_tree()
afs_alloc_sbi() uses kzalloc for memory allocation. And, if
ctx->dyn_root is not null, as->cell and as->volume are null.
In trace_afs_get_tree() they are dereferenced.
KASAN error message:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1
04/01/2014
RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550
include/trace/events/afs.h:1365
Call Trace:
trace_afs_get_tree include/trace/events/afs.h:1365 [inline]
afs_get_tree+0x922/0x1350 fs/afs/super.c:599
vfs_get_tree+0x8e/0x300 fs/super.c:1572
do_new_mount fs/namespace.c:3011 [inline]
path_mount+0x14a5/0x2220 fs/namespace.c:3341
do_mount fs/namespace.c:3354 [inline]
__do_sys_mount fs/namespace.c:3562 [inline]
__se_sys_mount fs/namespace.c:3539 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3539
do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix use-after-free in ump_to_endpoint()
create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a
back-pointer to its per-interface snd_usb_midi2_ump object in
ump->private_data, but it never installs an ump->private_free hook and
never clears that pointer.
If a later step of snd_usb_midi_v2_create() fails, its error path calls
free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while
the already-registered endpoint keeps pointing at it. The created
/dev/snd/umpC*D* node stays exposed, so the first operation of any UMP
open, ump_to_endpoint(), dereferences the dangling ump->private_data and
reads rmidi->eps[dir] out of freed memory.
A malicious USB MIDI 2.0 device that makes creation fail after the
endpoint is registered can thus trigger a slab use-after-free read on a
subsequent open of the UMP node.
Clear the endpoint's back-pointer before freeing the object, and let
ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger
callbacks fail cleanly (their callers already handle a NULL endpoint)
instead of dereferencing a stale pointer.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: always resume_all after suspend_all
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
Fix rxrpc_recvmsg() to also drop the ref it holds on an already-released
call if MSG_PEEK is in force (the function holds a ref on the call
irrespective of whether MSG_PEEK is specified or not). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish()
In luo_file_unpreserve_files() and luo_file_finish(), reorder
module_put() and xa_erase() to ensure the file handler module remains
pinned while its operations are being accessed.
Specifically, luo_get_id() dereferences fh->ops->get_id, so the module
reference must be held until after xa_erase() (which calls luo_get_id)
completes.
For luo_file_finish(), this requires moving the module_put() call out of
the luo_file_finish_one() helper and into the main loop of
luo_file_finish() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Allow entries in BO caches to be freed
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Bound synthetic-field strings with seq_buf
The synthetic field helpers build a prefixed synthetic variable name and
a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The
current code appends those strings with raw strcat(), so long key lists,
field names, or saved filters can run past the end of the staging
buffers.
Build both strings with seq_buf and propagate -E2BIG if either the
synthetic variable name or the generated command exceeds
MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while
using the helper intended for bounded command construction.
[ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix resource leak in probe error path
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
