| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix unlocked call to hns_roce_qp_remove()
Sashiko points out that hns_roce_qp_remove() requires the caller to hold
locks. The error flow in hns_roce_create_qp_common() doesn't hold those
locks for the error unwind so it risks corrupting memory.
Grab the same locks the other two callers use. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:si: Return state to normal if message allocation fails
There were places where nothing would get started if a message
allocation failed, so the driver needs to return to normal state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-tdes - fix DMA sync direction
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix integer overflow in run_unpack() volume boundary check
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages
to userspace but sets no vm_ops on the VMA. This means the kernel cannot
track active mmaps. When dlfb_realloc_framebuffer() replaces the backing
buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated.
On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages
while userspace PTEs still reference them, resulting in a use-after-free:
the process retains read/write access to freed kernel pages.
Add vm_operations_struct with open/close callbacks that maintain an
atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(),
check mmap_count and return -EBUSY if the buffer is currently mapped,
preventing buffer replacement while userspace holds stale PTEs.
Tested with PoC using dummy_hcd + raw_gadget USB device emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: validate packet IDs before indexing tx_frames
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix memory leak of BO array in hang state
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix a memory leak in hang state error path
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the previously allocated `kernel_state`,
leaking memory.
Add the missing kfree() calls by consolidating the early return paths
into a single place. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lapbether: handle NETDEV_PRE_TYPE_CHANGE
lapbeth_data_transmit() expects the underlying device type
to be ARPHRD_ETHER.
Returning NOTIFY_BAD from lapbeth_device_event() makes sure
bonding driver can not break this expectation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: s3fwrn5: allocate rx skb before consuming bytes
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already
deliver a complete frame before allocating a fresh receive buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix pass-by-value structs causing MSAN warnings
vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their
argument structs by value, causing MSAN to report uninit-value warnings.
While only vidtv_ts_null_write_into() has triggered a report so far,
both functions share the same issue.
Fix by passing both structs by const pointer instead, avoiding the
stack copy of the struct along with its MSAN shadow and origin metadata.
The functions do not modify the structs, which is enforced by the const
qualifier. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate owner of durable handle on reconnect
Currently, ksmbd does not verify if the user attempting to reconnect
to a durable handle is the same user who originally opened the file.
This allows any authenticated user to hijack an orphaned durable handle
by predicting or brute-forcing the persistent ID.
According to MS-SMB2, the server MUST verify that the SecurityContext
of the reconnect request matches the SecurityContext associated with
the existing open.
Add a durable_owner structure to ksmbd_file to store the original opener's
UID, GID, and account name. and catpure the owner information when a file
handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner()
to validate the identity of the requester during SMB2_CREATE (DHnC). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate rec->used in journal-replay file record check
check_file_record() validates rec->total against the record size but
never validates rec->used. The do_action() journal-replay handlers read
rec->used from disk and use it to compute memmove lengths:
DeleteAttribute: memmove(attr, ..., used - asize - roff)
CreateAttribute: memmove(..., attr, used - roff)
change_attr_size: memmove(..., used - PtrOffset(rec, next))
When rec->used is smaller than the offset of a validated attribute, or
larger than the record size, these subtractions can underflow allowing
us to copy huge amounts of memory in to a 4kb buffer, generally
considered a bad idea overall.
This requires a corrupted filesystem, which isn't a threat model the
kernel really needs to worry about, but checking for such an obvious
out-of-bounds value is good to keep things robust, especially on journal
replay
Fix this up by bounding rec->used correctly.
This is much like commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds
read in DeleteIndexEntryRoot") which checked different values in this
same switch statement. |
