| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_connect_ind
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: lock sk in iso_sock_getname
Accessing iso_pi(sk)->conn requires lock_sock, which is not held here.
Fix by adding the lock/release. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: clear iso_data always when detaching conn from hcon
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: make nft_object rhltable per table
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: prevent unbounded recursion in free path with new kmalloc type
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-
---truncated--- |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. |
| On a Kong Mesh global control plane, resources received over the zone-to-global KDS sync are attributed using the in-band, sender-controlled ControlPlane.Identifier rather than the authenticated zone identity derived from the connection. Authenticated zones can have the global control plane store and re-distribute those resources as belonging to another zone.
The result is a cross-zone isolation bypass: the holder of a single enrolled zone's credential can inject, attribute, and overwrite resources in another zone's namespace mesh-wide.
The root cause lives in Kuma's open-source KDS sync code, which Kong Mesh's control plane is built on. |
| go-gh is a collection of Go modules to make authoring GitHub CLI extensions easier. A security vulnerability has been identified in versions prior to 2.12.1 where an attacker-controlled GitHub Enterprise Server could result in executing arbitrary commands on a user's machine by replacing HTTP URLs provided by GitHub with local file paths for browsing. In `2.12.1`, `Browser.Browse()` has been enhanced to allow and disallow a variety of scenarios to avoid opening or executing files on the filesystem without unduly impacting HTTP URLs. No known workarounds are available other than upgrading. |
| OutSystems Service Center is vulnerable to a DOM-based Cross-Site Scripting (XSS) attack that can be exploited by a low-privileged attacker via the upload of a file with a malicious filename containing JavaScript code. The vulnerability exists in all locations where a file can be attached and prepared for upload to the server.
This issue was fixed in OutSystems Service Center version 11.41.2 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix UAF in rxgk_issue_challenge()
Fix rxgk_issue_challenge() to free the page containing the challenge
content after invoking the tracepoint as the whdr passed to the tracepoint
points into the page just freed. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc
rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the
rxrpc_call.rx_dec_buffer is unallocated and assumes that upon
successful return that rx_dec_buffer must be allocated.
However, rxrpc_verify_data() does not request an allocation if
the rxrpc_skb_priv.len is zero.
In addition, failure to allocate rx_dec_buffer will result in a
call to skb_copy_bits() with a NULL destination which can
trigger a NULL pointer dereference.
To prevent these issues rxrpc_verify_data() is modified to
always attempt to allocate the rxrpc_call.rx_dec_buffer if it
is NULL.
This issue was identified with assistance of a private
sashiko instance. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun4i-ss - Remove insecure and unused rng_alg
Remove sun4i_ss_rng, as it is insecure and unused:
- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)
The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen
and discovered by Atuin - Automated Vulnerability Discovery Engine
There's no point in fixing all these vulnerabilities individually when
this is unused code, so let's just remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Cancel hrtimer before clearing slave pointer
In i2c_imx_unreg_slave(), the slave pointer is set to NULL after
disabling interrupts. However, a pending interrupt might already
have started the hrtimer (i2c_imx_slave_timeout) before the pointer
was cleared. If the hrtimer fires after i2c_imx->slave is set to
NULL, the timer callback i2c_imx_slave_finish_op() will call
i2c_imx_slave_event() with a NULL slave pointer, which results in a
use-after-free / NULL pointer dereference.
Fix by canceling the hrtimer and waiting for it to complete after
disabling interrupts, before clearing the slave pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: Check CAP_NET_ADMIN for private ioctls
Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL,
SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN
capable check to ensure unprivileged users cannot invoke them. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: prevent peer transport count overflow
sctp_assoc_add_peer() increments the association's 16-bit transport_count
for every new unique peer. Adding the 65,536th transport wraps the count to
zero.
SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload,
then copies one sockaddr_storage for every entry in transport_addr_list.
After the wrap, a diagnostic dump reserves an empty payload and writes
8 MiB of peer addresses past the skb tail.
Reject a new unique peer when transport_count has reached U16_MAX. Perform
the check after the existing-peer lookup so a duplicate address continues
to return its existing transport at the limit. |
