| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in the NGAP handler of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted NAS PDU. |
| The User Registration & Membership WordPress plugin before 5.2.6 does not perform a capability check when saving its login settings, allowing authenticated users who have been granted a User Registration & Membership WordPress plugin before 5.2.6 management capability but not full administrator access to change arbitrary site options and escalate their privileges to administrator. |
| SOY Calendar contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix NAPI leak in XDP enable error path
During XDP enablement in veth, if xdp_rxq_info_reg() or
xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes.
However, the rollback loop:
for (i--; i >= start; i--) {
decrements the loop index 'i' before the first iteration. This
correctly skips unregistering the rxq for the failed index 'i' (as
registration failed or was already cleaned up), but it also
erroneously skips calling netif_napi_deli() for rq[i].xdp_napi.
Since netif_napi_add() was already called for index 'i', this leaves
a dangling napi_struct in the device's napi_list. When the veth
device is later destroyed, the freed queue memory (which contains the
leaked NAPI structure) can be reused.
The subsequent device teardown iterates the NAPI list and
corrupts the reallocated memory, leading to UAF.
Fix this by explicitly deleting the NAPI association for the failed
index 'i' before rolling back the successfully configured queues. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: don't BUG_ON an invalid journal dinode
[BUG]
A fuzzed OCFS2 image can corrupt the current slot journal dinode while
mount is still in progress. The mount path first reports the invalid
journal block and then crashes in shutdown:
kernel BUG at fs/ocfs2/journal.c:1034!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034
Call Trace:
ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116
ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline]
ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083
get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698
get_tree_bdev+0x24/0x40 fs/super.c:1721
ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
[CAUSE]
ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no
longer contained a valid dinode, because the startup and shutdown paths
already handled that failure. Commit 10995aa2451a
("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed
the check to a BUG_ON() under the assumption that the journal dinode had
already been validated. That turns an unexpected invalid journal dinode
during mount teardown into a kernel crash instead of a normal mount
failure.
[FIX]
Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the
invariant warning for debugging, but restores the original behavior of
failing startup or shutdown cleanly instead of panicking the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: use READ_ONCE() for dev->driver in dev_has_sync_state()
dev_has_sync_state() reads dev->driver twice without holding
device_lock() -- once for the NULL check and once to dereference
->sync_state. Some callers only hold device_links_write_lock, which
doesn't prevent a concurrent unbind from clearing dev->driver via
device_unbind_cleanup().
Fix it by reading dev->driver exactly once with READ_ONCE(), pairing
with the WRITE_ONCE() in device_set_driver(). |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: Fix slave registration race and error handling
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix potential NULL pointer dereference
dasd_release_space() checks the implementation of the is_ese()
discipline function before calling it to determine if a given device is
an ESE DASD.
The current usage of the logical AND operator will lead to a NULL
pointer dereference as the function is called even if the function
pointer is NULL.
Fix this by using the logical OR operator. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Tangible Loops & Logic. |
| When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known. |
| None None None No publicly available exploits are known. |
| An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known. |
| Trilium is an open-source hierarchical note-taking application. In versions prior to 0.104.0, the automatic image-download feature accepts file:// URLs in a note's img tags and reads the referenced local file with no path validation, allowing any authenticated user to disclose arbitrary files readable by the Trilium process. When a text note is saved, Trilium scans its HTML for image sources and downloads each external one; because the HTML sanitizer keeps file as an allowed scheme, a source such as file:///etc/passwd is passed straight to a filesystem read and its contents are stored as a note attachment the user can then retrieve. Pointing the same primitive at an unbounded source such as /dev/zero causes uncontrolled memory allocation that crashes the server process. The feature is enabled by default and is reachable through the web UI, the ETAPI, the web clipper, and note imports, requiring only an authenticated session or an ETAPI token. This issue is fixed in version 0.104.0 |
| libreoffice-convert is a Node.js module for converting office documents to different formats. Prior to 1.8.2, index.js uses the caller-controlled options.fileName value in path.join(tempDir.name, fileName) without reducing it to a base name. A filename containing ../ can escape the temporary directory because path.basename() normalization is missing and write the supplied document buffer to an arbitrary path writable by the process, including an SSH authorized_keys file, a cron configuration, or a web root. This issue is fixed in version 1.8.2. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.14.0 through 4.14.6, an authenticated low-privilege user can read the cluster secret from the manager configuration because the logic that masks sensitive values is disabled by any update-config RBAC rule, including an explicit deny. The mask_sensitive_config() decorator applies masking only when _has_update_permissions() returns false, but that gate treats a user as able to update the config whenever a manager:update_config or cluster:update_config rule exists, without ever checking whether the rule's effect is allow or deny. Because a deny rule is stored as a real entry, a read-only account that is hardened by explicitly denying config edits is counted as having update permission, which turns masking off. A single authenticated GET request to the configuration endpoint with raw=true then returns the verbatim ossec.conf XML with cluster.key in clear, whereas an otherwise identical account without the deny rule sees the value masked. This issue is fixed in version 4.14.7. |
| A flaw was found in the file-pvr plugin in GIMP. When processing a specially crafted PVR image file, the VQ (compressed) decoder does not properly perform memory bounds checking. This missing validation results in a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents. |
| WWBN AVideo through version 30.0 fails to enforce authentication on the report4.json.php and report4.1.json.php endpoints, allowing unauthenticated access to user registration statistics. Attackers can send GET requests to these endpoints to retrieve daily and cumulative user-registration counts without any session or authorization. |
| File Browser versions from 2.63.6 through 2.63.23 fail to clean up public share links when a privileged user deletes another user's shared file. Attackers can access the surviving share link to retrieve new unrelated content uploaded to the same path without authentication. |
