| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. |
| A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. |
| A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device. |
| A vulnerability in the anycast gateway feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a device to learn invalid Address Resolution Protocol (ARP) entries. The ARP entries are for nonlocal IP addresses for the subnet. The vulnerability is due to improper validation of a received gratuitous ARP (GARP) request. An attacker could exploit this vulnerability by sending a malicious GARP packet on the local subnet to cause the ARP table on the device to become corrupted. A successful exploit could allow the attacker to populate the ARP table with incorrect entries, which could lead to traffic disruptions. |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network. |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name. |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default. |
| A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default. |
| A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device. |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. |
| A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. |
| A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. NX-OS versions prior to 8.3(1) are affected. |
| A vulnerability in the Remote Package Manager (RPM) subsystem of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to leverage a time-of-check, time-of-use (TOCTOU) race condition to corrupt local variables, which could lead to arbitrary command injection. The vulnerability is due to the lack of a proper locking mechanism on critical variables that need to stay static until used. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a set of RPM-related CLI commands. A successful exploit could allow the attacker to perform arbitrary command injection. The attacker would need administrator credentials for the targeted device. |
| A vulnerability in the CLI implementation of a specific command used for image maintenance for Cisco NX-OS Software could allow an authenticated, local attacker to overwrite any file on the file system including system files. These file overwrites by the attacker are accomplished at the root privilege level. The vulnerability occurs because there is no verification of user-input parameters and or digital-signature verification for image files when using a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device and issuing a command at the CLI. Because an exploit could allow the attacker to overwrite any file on the disk, including system files, a denial of service (DoS) condition could occur. The attacker must have valid administrator credentials for the affected device to exploit this vulnerability. |
| A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device. |
