| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident attribute lists and harden the validator
A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list()
only on the non-resident path; ntfs_read_locked_inode() copies a *resident*
attribute list into ni->attr_list with a plain memcpy() and no validation
at all. Every subsequent walk of ni->attr_list --
ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and
ntfs_attrlist_need() -- then trusts the entries are well-formed and reads
attr_list_entry fixed-header fields
(lowest_vcn at offset 8, mft_reference at offset 16, and the name) with
bounds that assume validation already happened. A crafted resident
attribute list therefore reaches those walks unvalidated and can drive
out-of-bounds reads of the attribute-list buffer.
load_attribute_list() itself reads ale->name_offset (offset 7),
ale->mft_reference (offset 16) and the name length under only an
"al < al_start + size" bound, so its own validation loop can over-read the
fixed header of a truncated trailing entry by a few bytes.
Factor the per-entry validation into ntfs_attr_list_entry_is_valid(),
which requires each entry's fixed header (offsetof(struct
attr_list_entry, name)) to be in range before any field is dereferenced,
that ale->length is a multiple of 8 covering the fixed header plus the
name, and that the entry is in use and carries a live MFT reference.
ntfs_attr_list_is_valid() walks the buffer with it and checks the entries
tile it exactly. Use the list validator in load_attribute_list()
(replacing the open-coded loop, closing its own over-read) and on the
resident path in ntfs_read_locked_inode() (which previously skipped
validation entirely); patches 2/3 reuse the per-entry helper at the other
two attribute-list walks. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure. |
| A security vulnerability has been detected in macrozheng mall up to 1.0.3. This impacts an unknown function of the file /order/submit of the component Order Submission. The manipulation leads to race condition. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate external BO copy bounds for both stride paths
vmw_external_bo_copy() trusts caller-supplied offsets, strides, and
heights and operates on imported dma-buf vmaps:
- The equal-stride memcpy() bound was clamped after subtracting the
offsets from dst_size and src_size; an offset larger than the BO
size wraps the unsigned subtraction to a huge value and the
resulting memcpy() runs off the end of the vmap. dst_stride *
height is also a u32 multiplication that can overflow.
- The non-equal-stride row-by-row path had no bound at all. The
loop touches bytes through offset + (height - 1) * stride +
width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes),
and could likewise step past the end of either mapping.
The offsets and strides are derived from STDU/SOU plane state, so a
configured CRTC submitting a crafted atomic commit on an imported
framebuffer can reach this path.
Validate the exact row-copy endpoint against each BO's size up front
using check_mul_overflow() and check_add_overflow(). Use the bulk
memcpy() path only when width_in_bytes covers the whole stride;
otherwise copy one row at a time so partial-row updates near the bottom
of a framebuffer remain valid. Also reject zero strides and stride <
width_in_bytes, both of which the row-by-row path cannot represent
safely. |
| In the Linux kernel, the following vulnerability has been resolved:
can: softing: fw_parse(): validate firmware record spans
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in decompress_lznt
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix out-of-bounds check for cqe->len_list[]
Move index check before element access. |
| In the Linux kernel, the following vulnerability has been resolved:
char: tlclk: fix use-after-free in tlclk_cleanup()
This patch improves the module cleanup process in the tlclk driver to
prevent potential use-after-free and race conditions.
Currently, the file_operations structure does not specify the .owner
field, which could allow the module to be unloaded while user-space
processes are still interacting with the device. Additionally, the
tlclk_cleanup() function frees the alarm_events memory before ensuring
that blocked processes in the waitqueue are fully awakened and that the
switchover_timer has completed.
To address these cases, this patch:
- Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module
unloading while the device is in use.
- Updates tlclk_cleanup() to explicitly wake up all blocked readers
(wake_up_all), properly release hardware I/O regions, and safely
delete the timer (timer_delete_sync) prior to freeing memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: guard against possible NULL deref in __in6_dev_stats_get()
dev_get_by_index_rcu() could return NULL if the original physical
device is unregistered.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Add a sanity check for btree node size
Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image,
during the file system mounting process, specifically while loading the
catalog, a corrupted node_size value of 1 caused the rec_off argument
passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively
large. Consequently, the function failed to return a valid value to
initialize the off variable, triggering the bug [1].
Every node starts from BTree node descriptor: struct hfs_bnode_desc.
So, the size of node cannot be lesser than that. However, technical
specification declares that: "The node size (which is expressed in bytes)
must be power of two, from 512 through 32,768, inclusive." Add a check
for btree node size base on technical specification.
[1]
BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584
hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382
hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN
kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort
when kvm_translate_vncr() returns -EFAULT. This is not always the case
as it's possible to encounter 'late' failures on the output of S1
translation, e.g. a GFN outside of the memslots.
Fix it by preparing an external abort before returning from
kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection
path while at it. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Fix reading the minimum alarm voltage
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/userptr: Hold notifier_lock for write on inject test path
When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit()
runs vma_check_userptr() with the svm notifier_lock taken for read. The
test injection causes vma_check_userptr() to call
xe_vma_userptr_force_invalidate(), which feeds into
xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That
flag tells drm_gpusvm_unmap_pages() the caller already holds
notifier_lock for write and only asserts the mode. Because the caller
actually holds it for read, the assertion fires:
WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \
drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper]
Call Trace:
xe_vma_userptr_do_inval+0x40d/0xfd0 [xe]
xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe]
xe_vma_userptr_force_invalidate+0xde/0x290 [xe]
vma_check_userptr.constprop.0+0x1c6/0x220 [xe]
xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe]
...
xe_vm_bind_ioctl+0x3a0a/0x4480 [xe]
Acquire notifier_lock for write in pre-commit when the inject Kconfig
is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock().
Rename xe_svm_assert_held_read() to
xe_svm_assert_held_read_or_inject_write() so it asserts the correct
mode under each build configuration. Production builds
(CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode
behavior bit-for-bit.
(cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag
The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps
inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the
decrement still happens and wraps it to 255. The break only leaves
the inner switch -- a later path entry can set info->indev back to
a real device, and we end up returning with num_encaps == 255.
nft_dev_forward_path() then walks info.encap[] (size 2) up to
num_encaps, which means an OOB stack read and a bogus count copied
into the route descriptor.
Should only happen on a malformed bridge path stack, hence the WARN,
but worth handling sanely. Move the decrement out of the WARN.
[ While at this, remove the WARN_ON_ONCE since this can only happen
with a buggy bridge path stack --pablo ]. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
Use get_unaligned_be32() and put_unaligned_be32() to safely read and
write the timestamp fields. This prevents performance degradation due to
unaligned memory access or even a crash on strict alignment
architectures.
This follows the implementation of timestamp parsing in the networking
stack at tcp_parse_options() and synproxy_parse_options(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size
The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58
bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing
64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512,
eight times the actual on-device size.
header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the
RAS capability iomap, overrunning the 88-byte mapping by 448 bytes.
The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE
(512) bytes from its source. For the CPER caller the source is
struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a
stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes
of kernel stack into the trace event ring buffer where userspace can
read it via tracefs.
Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it,
bringing all iomap readers into agreement on 16 dwords. Userspace tools
such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32)
header_log layout in the cxl_aer_uncorrectable_error trace event. Add
CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event
__array and its memcpy to preserve that ABI. Both callers now pass a
zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only
the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware;
the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring
buffer layout intact.
[ dj: Replaced 64 with SZ_64 per RichardC ] |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Reject non-exclusive metadata maps in the signed loader
The loader verifies map->sha against the metadata hash in its
instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is
called on the frozen map.
While the map is frozen, the /signed loader/ must also ensure the map
is exclusive, as, without exclusivity (which a hostile host could just
omit when loading the loader), another BPF program with map access can
mutate the contents afterwards, so the check passes on stale data.
With the extra check as part of the signed loader, it now refuses to
move on with map->sha validation if the host set it up wrongly. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: amd-mp2: Unregister callback on adapter add failure
amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI
driver's callback table before the adapter is registered. If
i2c_add_adapter() fails, probe returns and devres frees the context,
but the PCI driver can still dereference the stale pointer from its IRQ
and system-sleep callbacks.
Unregister the callback before returning the adapter registration error. |
